Polycrystalline silicon (LPCVD) has been studied for contact, gate metal, and resistor application in integrated circuits. In this study the effect of heat‐treatment on boron‐implanted low pressure chemical vapor deposited polycrystalline is investigated. In general, grain growth and morphology change take place in both preimplant and postimplant heat‐treatment. Namely, the poly‐Si films after heat‐treatment consist of more equal axed grains than the mosaic dendrite structures in the untreated samples. However, the pre‐implant heat‐treatment appeared to be more effective for grain growth because of lack of impurity hindrance of grain boundary movement. The sheet resistivity of the pre‐implant heat‐treated samples is predominantly controlled by ion redistribution, and that of the postimplant annealed samples is controlled by both morphology change and ion redistribution. Both kinds of samples showed much lower resistivity due to heat‐treatment reduction of grain boundary trapping centers and significant resistivity reversal anneal due to redistribution of the implanted ions.