Abstract
The kinetics of the
and
plasma etching of
,
, and
at 300°C and the role of added
were investigated using atomic emission as a diagnostic aid. With the exception of the
etching of
, the etching rates were observed to be linear functions of the emission intensity from electronically excited Cl, regardless of the feed‐gas composition.
was observed to etch significantly faster in a
discharge than would have been expected from the Cl emission intensity alone, indicating the active involvement of
species. Addition of a small amount of
to either
or
resulted in an increase in the intensity of Cl atomic emission. With feed compositions of ∼40%
in
, extremely fast etching rates of 7.3(2.5), 2.4(0.9), and 1.6(2.1) μm/min were obtained for
,
, and
, respectively. A vertical to horizontal etching rate ratio of less than two was obtained in all cases with the exception of
etching of
. Here it was found that the anisotropy of the etching process could be controlled by varying the fraction of
in the feed; with ∼40%
, the ratio was 4.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
