The spreading resistance technique has been used to measure the degree of resistivity compensation in NTD‐Si samples following Au diffusion under many different conditions. From the theoretical curves of Thurber and Bullis (1) these can be converted to substitutional Au concentration distributions, Equation or symbol description not availableCs. Several new effects have been found, all of which can be interpreted using the “kick‐out” mechanism, whereby Au atoms enter substitutional sites by removing an Si atom that becomes a self‐interstitial, Equation or symbol description not availableI. The Au diffusion process is then controlled entirely by the local concentration,Equation or symbol description not availableCI, and out‐diffusion of these self‐interstitials. Detailed analyses and numerical solutions of the diffusion equations are given, and the experimental results can all be fitted, for instance, at 845°C using an Si self‐interstitial diffusion constant Equation or symbol description not availableDI≧3×10−7 cm2 sec−1. The time dependence of Equation or symbol description not availableCS is also explained. For the first time, direct evidence for the very rapid diffusion of interstitial gold, Equation or symbol description not availableAui, is presented. It is shown that Equation or symbol description not availableDi≧10−5 cm2 sec−1 and that the equilibrium concentration of Equation or symbol description not availableAui is probably greater than or equal to the equilibrium concentration of substitutional atoms, Equation or symbol description not availableAuS. The effect of swirl defects on Au diffusion is also demonstrated and explained.