Abstract
Studies have been made of thick a‐c anodic films on commercial purity aluminum and aluminum‐copper alloys in sulfuric and oxalic acid solutions, with particular examination of the constituents in these alloys. Film structure, topography, and composition were characterized through electron microscopy and electron probe microanalysis. It was found that iron‐rich second‐phase particles and copper‐rich, iron, and manganese dispersed intermetallics presented in the 1100‐H14 aluminum alloy and in the 2024‐T3 aluminum alloy, respectively, have been incorporated and retained in the a‐c films during their growth. The embedment of these 0.5–10 μm intermetallic constituents did not substantially affect a‐c thick porous film growth, film/electrolyte and film/metal interfaces, film pore and barrier layer structures, or uniformity of film thickness. The mechanisms of incorporation of nonreactive iron‐rich second‐phase particles and reactive copper‐rich intermetallics into the growing film are discussed.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
