Cross‐linked positive resists derived from copolymers of methacrylonitrile (MCN) and methacrylic acid (MAA) have been developed based on the theoretical formula which shows that a large Equation or symbol description not availableMW×GS value is essential to improve the cross‐linked positive resist sensitivity, where Equation or symbol description not availableMW is the weight‐average molecular weight and Equation or symbol description not availableGS is the main chain scission efficiency. The cross‐linked positive resist consists of Equation or symbol description not availableP(MCN92‐MAA8) with a viscosity‐average molecular weightEquation or symbol description not available(M̅V) of Equation or symbol description not available5.7×105 and tripropylene glycol diglycidyl ether (TPG) as a cross‐linking agent. It has high sensitivity (3 μC/cm2) and high dry‐etch resistance, reflecting the large Equation or symbol description not availableMW×GS value of the copolymer and the high dry‐etch resistance of the MCN component. The resist is applied to a trilayer resist system as the top imaging layer. Submicron fine patterns delineated at 3.4 μC/cm2 are transferred to the thick organic layer, and high aspect ratio patterns are obtained.