Texas Instruments' solar energy system contains a solar‐chemical converter (SCC) which converts solar energy into chemical energy via the electrolysis of hydrobromic acid Equation or symbol description not available(HBr) into hydrogen Equation or symbol description not available(H2) and bromine Equation or symbol description not available(Br2). Previous predictions of SCC performance have employed electrical dry‐probe data and a computer simulation model to predict the Equation or symbol description not availableH2generation rates. The method of prediction described here makes use of the photoelectrochemical I‐V curves to determine the “wet”‐probe parameters of Equation or symbol description not availableVOC, Equation or symbol description not availableJSC, FF, and efficiency for anodes and cathodes. The advantages of this technique over the dry‐probe/computer simulation method are discussed. A comparison of predicted and measured Equation or symbol description not availableH2 generation rates is presented. Solar to chemical efficiencies of 8.6% have been both predicted and measured for the electrolysis of 48% Equation or symbol description not availableHBr to hydrogen and bromine by a full anode/cathode array. Individual cathode solar to hydrogen efficiencies of 9.5% have been obtained.