Abstract
The molecular ions
and
are implanted into <100> silicon at an energy of 16 keV per boron atom in the dose range of
to form shallow p+/n junctions. Cross‐sectional transmission electron microscopy shows that chlorine is at least four times as effective as fluorine in amorphizing silicon. The increase in thickness of the amorphous layer, however, has a small effect in the reduction of axial channeling of boron as measured by secondary ion mass spectrometry. After annealing for 30 min at 900°C, diffusion of interstitial boron is enhanced by chlorine relative to fluorine, whereas the electrical activity of boron is inhibited. Diodes made with both
and
implantations have comparable I‐V characteristics with low reverse‐bias junction leakage currents that are not affected by a band of dislocation loops which remain near the original amorphous‐crystalline interface.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
