Abstract
Information about the diffusing species and the mechanisms of diffusion during second‐phase formation of
,
, and
was obtained by using radioactive 31Si
as a tracer. The position of the radioactive silicon tracer was determined after silicide formation by using sputter depth profiling and radioactivity measurement, the amount of silicide removed during sputtering being determined by Rutherford backscattering spectrometry of alpha particles. The metal was found to diffuse during
growth, while Si appeared to be the dominant diffusing species for
and
formation. Radioactive silicon used as a tracer can also give information regarding the diffusion mechanisms occurring during silicide formation if silicon is the diffusing species. It was concluded that transformation of
predominantly takes place by silicon grain boundary diffusion, whereas
formation from
apparently occurs by a combination of silicon grain boundary and silicon vacancy diffusion.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
