The structural control of electroless‐plated Equation or symbol description not availableCoP film was investigated using underlayers of electroless‐platedEquation or symbol description not availableCoNiMnP and Equation or symbol description not availableCoNiP films. The Equation or symbol description not availableCoNiMnP film showed a high degree of orientation of the hcp Co c‐axis normal to the film plane, whereas the Equation or symbol description not availableCoNiP film hardly showed any preferred orientation. The Equation or symbol description not availableCoP film plated onto the Equation or symbol description not availableCoNiMnP underlayer showed a high degree of preferred orientation, while the Equation or symbol description not availableCoP film plated onto the Equation or symbol description not availableCoNiP underlayer showed a low degree of preferred orientation. Thus, the microstructure of the Equation or symbol description not availableCoP film is clearly influenced by the underlayer structure. In the case of the Equation or symbol description not availableCoP film onto the Equation or symbol description not availableCoNiMnP underlayer. an epitaxial‐like growth was observed up to a thickness of 0.25 μm, and this reduced to the intrinsic microstructure at a thickness of 0.5 μm. Recording characteristics were measured on the 5 in. flexible disks, fabricated by plating the high‐oriented Equation or symbol description not availableCoP film or the low‐oriented Equation or symbol description not availableCoP film with a ringtype head of a commercial VHS video head. Perpendicular recording was performed on the high‐oriented Equation or symbol description not availableCoP film to demonstrate the best characteristics. The use of an oriented underlayer is thus confirmed to be a useful method of controlling the structure of the magnetic film in addition to controlling the bath plating parameters.