The thermal stability of Equation or symbol description not availableCu/CoSi2 contacted p+n shallow junction diodes with and without Equation or symbol description not availableTiW diffusion barrier was investigated with respect to metallurgical reaction and electrical characteristics. Without the diffusion barrier, theEquation or symbol description not availableCu (2000Å)/CoSi2 (700Å)/p+n diodes (with a junction depth of 0.2 μm measured from the silicide surface) were able to sustain a 30 s rapid thermal annealing (RTA) in Equation or symbol description not availableN2 ambient up to 450°C without losing the integrity of the devices characteristics. The Equation or symbol description not availableCu3Si phase was observed at the Equation or symbol description not availableCoSi2/Si interface after 500°C annealing; the phase penetrated through the Equation or symbol description not availableCoSi2 layer causing a catastrophic change in layer structure after 700°C annealing. With the addition of a 1200 Å thickness of Equation or symbol description not availableTiW diffusion barrier between Cu and Equation or symbol description not availableCoSi2, the junction diodes were able to sustain the RTA treatment up to 775°C without degrading the basic electrical characteristics, and no metallurgical reaction could be observed even after an 800°C annealing.