Abstract
The creep strength of battery grids, expanded from drum‐cast low‐antimony lead alloy strip, was varied by heat‐treatments at several temperatures. Grid growth following potentiostatic corrosion was found to be highly anisotropic. In spite of an increase in length, there was a decrease in width. A theoretical analysis indicated that growth of expanded grids consisted of two components: an increase in the wire length (wire elongation), and a change in the grid shape (grid shear). The rate of the wire elongation in the corrosion test was found to be inversely related to the grid creep strength, and the deformation mechanism was identified as power‐law creep. It is shown that, in order to meaningfully compare grid growths, the geometrical environment of grid test samples must be carefully controlled.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
