Abstract
A route toward the synthesis of several
-based catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane (PEM) fuel cells is described here. The composition of these catalysts has been determined by X-ray diffraction studies, while their electrochemical activity was established using slow sweep cyclic voltammetry in 0.5 M
at room temperature. We have found that by mixing a Co oxide sol precursor with Pt supported on carbon
, followed by heat-treatment at 700 or 900°C, the active PtCo alloy catalyst is formed. In contrast, when exactly the same procedure is followed but a Co oxide sol-derived
catalytic material is employed,
alloy catalysts, which are somewhat less active toward the ORR, are formed. Catalysts formed by heating at 900°C are more active than those formed at 700°C, and all of our
catalysts are more active toward the ORR than pure Pt on carbon.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
