A lithium polymer battery with high-capacity Equation or symbol description not available(180mAhg−1) Equation or symbol description not availableLiCoO2 was prepared by the fine-powder coating of highly lithium-ion-conductive ceramic electrolyte Equation or symbol description not available[Li1.5Al0.5Ge1.5(PO4)3] on Equation or symbol description not availableLiCoO2 powder. The obtained cell (operated at Equation or symbol description not available333K) exhibited a good reversibility up to Equation or symbol description not available4.4V and a good sustainability of Equation or symbol description not available105mAhg−1 at the Equation or symbol description not available200thcycle. The oxidation of the polymer electrolyte was determined by alternating current (ac) impedance analysis, and it was observed that a suitable ceramic electrolyte coating is an effective oxidation barrier at the polymer/cathode interface.