Continuous Cu films are deposited on Ta by a two-step process; galvanic displacement of Ta by Cu from ammonium fluoride solutions and subsequent electroless Cu deposition from a formaldehyde-containing bath. The conditions necessary for good adhesion are discussed. The extent of oxide film removal in the HF pretreatment solution is studied by electrochemical impedance spectroscopy. The charge-transfer resistance of about Equation or symbol description not available57 Ω­cm2 is several orders of magnitude lower than that measured for the Ta native oxide. These results are consistent with the removal of the Equation or symbol description not availableTa2O5 portion of the native oxide. © 2004 The Electrochemical Society. All rights reserved.