Equation or symbol description not availableLu2O3 thin films with a high dielectric constant (high k value) deposited on n-Si(100) were investigated. A capacitance equivalent thickness of 1.6 nm with a leakage current density of Equation or symbol description not available1.2×10−3 Equation or symbol description not availableA/cm2 Equation or symbol description not available(at+1V) was obtained for 4.5 nm thick Equation or symbol description not availableLu2O3 deposited at room temperature followed by postdeposition annealing (PDA) at 400°C in Equation or symbol description not availableN2. The surface morphology for 8-20 nm thick Equation or symbol description not availableLu2O3 films became rough after the PDA process because of the crystallization, whereas the surface of 4.5 nm thick Equation or symbol description not availableLu2O3 was smooth even after the PDA process. No frequency dependence in the capacitance-voltage curve was observed, and its relative dielectric constant was 11. The hygroscopic properties of the Equation or symbol description not availableLu2O3 thin films seemed to be superior to those of other rare-earth oxide thin films, probably due to Equation or symbol description not availableLu2O3 having the largest lattice energy among the rare-earth oxides. © 2004 The Electrochemical Society. All rights reserved.