To understand the mechanism of recently reported low‐temperature Cu dry etching using an inductively coupled Equation or symbol description not availableCl2/N2 plasma with ultraviolet light irradiation, we have studied the reaction characteristics between Cu thin film and an inductively coupled Equation or symbol description not availableCl2/N2 plasma at room temperature without/with ultraviolet irradiation, light absorption characteristics of solid etch products in ultraviolet/visible region, and mass spectrometry of gaseous desorption products during ultraviolet photon irradiation on solid etch product Equation or symbol description not availableCuClx(s) surface. Ultraviolet irradiation increased the Cu consumption rate for the total etch reaction by approximately five times and the Cl stoichiometry x of Equation or symbol description not availableCuClx(s) was always above 1.0 (1.2–1.3) regardless of reaction time in contrast to results without ultraviolet light irradiation. The mechanism of low‐temperature Cu dry etching induced by ultraviolet light irradiation consists of selective absorption of ultraviolet radiation (300–400 nm) by the solid etch product Equation or symbol description not availableCuClx(s) depending on the Cl stoichiometry x due to the electronic transitions of bonding electrons of CuCl (bandgap transition) or Equation or symbol description not availableCuCl2 (charge transfer), weakening of Equation or symbol description not availableCuClx(s) bonding, and nonthermal desorption of gaseous products. The dominant desorbed species were Equation or symbol description not availableCuCl2 and Equation or symbol description not availableCu2Cl3 during the ultraviolet irradiation on Equation or symbol description not availableCuClx(s), which is different from the Equation or symbol description not availableCu3Cl3 for the pure thermal desorption. Also, the distribution of gaseous products from the Equation or symbol description not availableCuClx(s) by ultraviolet irradiation depends on the Cl stoichiometry x of Equation or symbol description not availableCuClx(s), especially whether x < 1.0 or x > 1.0. © 1999 The Electrochemical Society. All rights reserved.