The oxidation of organics, in particular of p‐benzoquinone and maleic acid, at high anodic potentials has been studied using a range of anode materials such as noble‐metal‐based oxides and antimony‐doped tin oxides. The influence of the current density was also investigated showing that the oxidation rate of p‐benzoquinone increased only slightly with increasing current density. The efficiency of the p‐benzoquinone oxidation was found to depend on several properties of the anode material, not just its chemical nature. Furthermore, efficiencies for the partial oxidation of p‐benzoquinone using specially prepared noble‐metal‐oxide‐based anodes were found to be only somewhat smaller or even as high as those observed for Equation or symbol description not availablePbO2 or antimony‐doped tin oxide anodes, respectively. The anodic electrolysis of maleic acid solutions was found to decrease the activity of Equation or symbol description not availableIrO2 for the oxidation of organic compounds. This was not observed when Equation or symbol description not availablePbO2 was employed for the oxidation of maleic acid. © 1999 The Electrochemical Society. All rights reserved. ©2001 American Geophysical Union