Abstract
The influence of aluminum, tungsten, and chromium alloying additions to
on scale formation during high‐temperature oxidation was studied. For the study
alloys were chosen with a maximum content of Al in C40 phase which was obtained. The surface of aluminum‐alloyed
is sealed with a dense alumina scale as a result of preferential oxidation of aluminum. Partial substitution of W for Mo in aluminum‐alloyed
does not significantly change the mechanism of alumina scale formation during oxidation. In the case of Cr substitution for Mo, the scale contains alumina as well, but some dissolution of Cr in alumina is present. The influence of alloy porosity on the oxidation rate of aluminum‐alloyed
was studied. The scale formed on porous samples was found to consist of a glassy oxide with considerable amounts of
, which leads to a relatively high oxidation rate. © 1999 The Electrochemical Society. All rights reserved.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
