Abstract
An epitaxial
layer was grown on Si(100) substrate by the diffusion of Co from a cobalt‐carbon film without the use of an interlayer, which is usually required between the Si and cobalt layers for the formation of epitaxial
layers. Co‒C and pure Co layers were deposited by metallorganic chemical vapor deposition using the Co precursor cyclopentadienyl dicarbonyl cobalt,
, and cobalt carbonyl,
, at 350 and 200°C, respectively. The
layer was epitaxially grown on Si(100) substrate from Co‒C by ex situ rapid thermal annealing at 800°C in
ambient. However, the polycrystalline
layer was formed from pure Co film under the same annealing conditions. The supply of Co to the interface by diffusion in the Co‒C film seems to be lower enough than in the pure Co film, resulting in an epitaxial
layer on Si(100) substrate. © 1999 The Electrochemical Society. All rights reserved.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
