The solubility of ozone in aqueous solutions expressed as a pseudo-Henry’s law coefficient for ozone, Equation or symbol description not available*HO3T, is measured over a pH range of 1 to 8, and temperature range of 15 to 45°C in the presence of several additives: HCl, Equation or symbol description not availableHNO3, HAc (Ac is acetate), NaAc, and NaOH. The value of Equation or symbol description not available*HO3T was found to be a function of temperature, pH, and nature of the anion. The pseudo-Henry’s law coefficient is maximal at low pH and decreases with rising pH of the aqueous solution. The addition of chloride enhances the ozone decay rate and thus decreases the solubility below pH 2 while the addition of acetic acid/acetate results in an increase of Equation or symbol description not available*HO3T for Equation or symbol description not availablepH>3. The solubility enthalpy Equation or symbol description not availableΔHsol0 for ozone is found to be equal to Equation or symbol description not available(−22.38±0.79)kJ/mol. For applications of ozone in semiconductor cleaning processes, knowledge of the dependence of Equation or symbol description not available*HO3T on pH, temperature, gas phase concentration, and additive is important in order to achieve optimized cleaning conditions. © 2001 The Electrochemical Society. All rights reserved.