Abstract
Oxygen reduction reaction (ORR) kinetics were investigated on bulk synthesized analogues of Al-Cu, Al-Cu-Mg, and Al-Cu-Fe-Mn intermetallic phases with and without chromate conversion coating (CCC) in 0.1 M
M NaCl (pH 6) with minimal levels of total dissolved chromate. The results were compared to AA 2024-T3 and high purity Al, Cu, Cr, and Au. Net cathodic ORR mass transport-limiting current densities of Al-based materials, lacking large quantities of Fe, Mn, or Cu were lower than the theoretically predicted rates in the mass transport controlled regime of ideal electronic conductors. This suggests a second rate-limiting factor in the case of these Al-based materials that was deduced to be related to Al-rich surface oxides. A second rate-limiting effect was also seen for pure Cr, implying that
inhibits ORR kinetics. CCC inhibited open circuit corrosion, via reduced ORR kinetics. It also serves as a diffusive barrier to
transport. The role(s) of CCC as an enhanced electronic barrier to electron transfer or barrier to
chemisorption remains unclear. © 2001 The Electrochemical Society. All rights reserved.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.

electrolyte mixture was found to be more potent at suppressing pitting at pH 8 compared with at pH 6.
provided the radius of the intermetallics (r) is much smaller than δ.
such that cathodic erosion suppresses
However, studies on Al with different oxide thickness support the claim that the oxide reduces
because
is lowered when Al oxides were thicker. Moreover, studies of Al cathodic kinetics suggest that cathodic corrosion rates should be negligible under conditions of this study.