Abstract
The microstructures and electrical properties of thin and thick Pb(Zr0.52, Ti0.48)O3 (52/48 PZT) films for microdevice applications with thicknesses from 480 nm to 2.3 µm on 350 nm Pt(111)/40 nm Ti/300 nm SiO2/Si 525 µm substrates fabricated by a sol–gel multicoating process were investigated. These PZT films showed dense and homogeneous surface microstructures. The crystalline structures of 480-nm-thick PZT films showed a (111) preferred orientation over (100), (200) and (110) orientations. The intensity ratios of (100) and (200) to (111) increased at PZT film thicknesses greater than 480 nm. By Auger electron spectroscopy, small-composition-variation peaks at an interval of approximately 120 nm at interfaces produced by each PZT coating process of 480 nm PZT films were found. Dielectric constants increased from 825 to 880 at 100 kHz and PZT film thicknesses from 480 nm to 2.3 µm. The Pr and Ec of 2.3-µm-thick PZT films were about 30 µC/cm2 and 58 kV/cm, respectively. The e31,f of 1-µm- and 2-µm-thick PZT films was characterized by the fabricated e31,f measurement system before and after poling.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
