Abstract
The deformation characteristics of geotechnical materials are very important for improving the safety of highways. To determine the reliability and detection accuracy of the falling ball tester, the paper uses standard method and falling ball tester to measure the dynamic elastic modulus of standard components, PPR. The theoretical result is obtained by measuring the dynamic elastic modulus of the one-dimensional member with the single-side reflection method. To calculate the Poisson's ratio, the transmission method is used to measure the P wave velocity of PPR that is 3 dimensional. In the falling ball tests, two excitation hammers with a diameter of 0.05m and 0.06m are used to measure the dynamic elastic modulus of PPR. By comparing the theoretical results with the values obtained by D50 and D60, it is found that more accurate results can be obtained by D60.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.