Brought to you by:
Erratum The following article is Free article

Erratum: Measurements of anisotropic g-factors for electrons in InSb nanowire quantum dots (2021 Nanotechnology 32 020002)

, , , , and

Published 16 December 2020 © 2020 IOP Publishing Ltd
, , Citation Jingwei Mu et al 2021 Nanotechnology 32 109602 DOI 10.1088/1361-6528/abce56

This is a correction for 2021 Nanotechnology 32 020002

0957-4484/32/10/109602

Export citation and abstract BibTeX RIS

Due to an error in the production, figures 3 and 4 were published incorrectly. The correct figures are displayed below.

Figure 3.

Figure 3. (a) Values of ${{g}}_{{\rm{I}}}^{* }$ extracted from the Zeeman splitting of the first quantum level of the QD in device A, measured in a similar way as in figures 2(a) and (b), as a function of the rotation angle of a magnetic field B with ∣B∣ = 0.4 T in the X–Y plane as indicated in the schematics (top panel). (b) and (c) The same as in (a) but for the magnetic field rotated in the Z–X and Z–Y planes. The red solid lines are the results of the fit of the experimental data to equation (1).

Standard image High-resolution image
Figure 4.

Figure 4. (a)–(c) Values of ${{g}}_{{\rm{I}}{\rm{I}}}^{* }$ extracted from the Zeeman splitting of the second quantum level of the QD in device A, measured in a similar way as in figures 2(c) and (d), (i.e. from the excitation spectra), as a function of the rotation angle of magnetic field B with ∣B∣ = 0.8 T in the X–Y, Z–X, and Z–Y planes as indicated in the schematics in figure 3. The red lines are the results of the fit of the experimental data to equation (1).

Standard image High-resolution image
10.1088/1361-6528/abce56