Abstract
In recent years, a growing demand for the capability of performing accurate measurements of the bidirectional transmittance distribution function (BTDF) has been observed in industry, research and development, and aerospace applications. However, there exists no calibration and measurement capabilities (CMC)-entry for BTDF in the database of the Bureau International des Poids et Mesures (BIPM) and to date no BTDF comparison has been conducted between different national metrology institutes (NMIs) or designated institutes (DIs). As a first step to a possible future key comparison and to test the existing capabilities of determining this measurand, two interlaboratory comparisons were performed. In comparison one, five samples of three different types of optical transmissive diffusers were measured by five NMIs and one DI. By specific sample choice, the focus for this study lay more on orientation-dependent scatter properties. In comparison two, where one NMI, one DI, one university, and three industrial partners investigated their measurement capabilities, the dependence on the orientation was not assessed, but two additional samples of the same material and different thickness were measured. Results of the two comparisons are presented, giving a good overview of existing experimental solutions, and showing specific sample-related problems to be solved for improved future BTDF measurements.
Export citation and abstract BibTeX RIS
As the Version of Record of this article is going to be / has been published on a gold open access basis under a CC BY 4.0 licence, this Accepted Manuscript is available for reuse under a CC BY 4.0 licence immediately.
Everyone is permitted to use all or part of the original content in this article, provided that they adhere to all the terms of the licence https://creativecommons.org/licences/by/4.0
Although reasonable endeavours have been taken to obtain all necessary permissions from third parties to include their copyrighted content within this article, their full citation and copyright line may not be present in this Accepted Manuscript version. Before using any content from this article, please refer to the Version of Record on IOPscience once published for full citation and copyright details, as permissions may be required. All third party content is fully copyright protected and is not published on a gold open access basis under a CC BY licence, unless that is specifically stated in the figure caption in the Version of Record.