Letter
071001
The following article is Open access
I M Moiseenko, V V Popov and D V Fateev
The excitation and amplification of the propagating plasmons in a periodic active (with population inversion of charge carriers) graphene-based structure with dual grating-gate with an asymmetric unit cell is studied theoretically. Such structure transforms the normally incident THz electromagnetic wave into sustained or amplified unidirectionally propagating plasmon. This effect is caused by simultaneous excitation of radiative and ‘non-radiative’ plasmon modes at the same frequency.
Topical Review
072001
The following article is Open access
Jeff Armstrong, Alexander J O’Malley, Matthew R Ryder and Keith T Butler
Recent developments in first-principles lattice dynamics and classical force field based molecular dynamics are revolutionising the field of neutron spectroscopy. Herein we present a short review of these methods, their critical role in the supporting of cutting-edge experiments, and how they are improved by matching experimental data. We begin with a brief overview of how lattice dynamics calculations can be compared to inelastic neutron scattering (INS) and molecular dynamics simulations to both INS and quasi-elastic neutron scattering (QENS). We then provide a series of exemplar applications where lattice dynamics and molecular dynamics have been used in conjunction with neutron spectroscopy to bring significant understanding to topical areas of materials science namely: (i) lattice dynamics and INS for the study of hybrid organic-inorganic perovskites (ii) lattice dynamics and INS for the study of flexible porous solids and (iii) molecular dynamics and QENS for probing molecular behaviour in zeolite catalysis. In all three cases, the understanding gained through the synergy of experiment and computation would have been significantly reduced using either in isolation. Finally, we consider the current state of the art, describing outstanding challenges and suggesting future directions in this exciting and fertile area of physical science.
Paper
075001
The following article is Open access
Espen Gaarder Haug
In this paper, we show how one can find the Planck length multiplied by the speed of light, lpc, from a Newton force spring with no knowledge of the Newton gravitational constant G, the speed of light c, or the Planck constant h. This is remarkable, as for more than a hundred years, modern physics has assumed that one needs to know G, c, and the Planck constant in order to find any of the Planck units. We also show how to find other Planck units using the same method. To find the Planck time and the Planck length, one also needs to know the speed of light. To find the Planck mass and the Planck energy in their normal units, we need to know the Planck constant, something we will discuss in this paper. For these measurements, we do not need any knowledge of the Newton gravitational constant. It can be shown that the Planck length times the speed of light requires less information than any other Planck unit; in fact, it needs no knowledge of any fundamental constant to be measured. This is a revolutionary concept and strengthens the case for recent discoveries in quantum gravity theory completed by (Haug 2020 Phys. Essays33 46–78).
075002
The following article is Open access
Yoshiyuki Hirano, Masataka Komori, Daichi Onoda, Takayuki Nagae and Seiichi Yamamoto
Radioluminescence by protons and carbon ions of energy lower than the Cherenkov threshold (∼260 keV) in water has been observed. However, the origin of the luminescence has not been investigated well. In the present work, we imaged radioluminescence in water using synchrotron radiation that was of sufficiently lower energy (11 keV) than the Cherenkov threshold and we measured its spectrum using a high-sensitivity cooled CCD camera and optical longpass filters having 5 different thresholds. In addition, to determine effects of impurities in water, the water target was changed from ultrapure water to tap water. Monte Carlo simulation (Geant4) was also performed to compare its results with the experimentally obtained radioluminescence distribution. In the simulation, photons were generated in proportion to the energy deposition in water. As a result, the beam trajectory was clearly imaged by the radioluminescence in water. The spectrum was proportional to λ−3.4±0.4 under an assumption of no peaks. In the spectrum and distribution, no differences were observed between ultrapure water and tap water. TOC (total organic carbon) contents of ultrapure water and tap water as an impurity were measured and these were 0.26 mg l−1 and 2.3 mg l−1, respectively. The radioluminescence seemed to be attributable to water molecules not impurities. The radioluminescence distribution of the simulation was consistent with the experimental distribution and this suggested that radioluminescence was proportional to dose, which is expected to allow use for dose measurement.
075003
The following article is Open access
Zbigniew Kozioł
A convenient scheme is presented for calculating potential energy of van der Waals interacting bilayer graphene and other similar 2D compounds. It is based on the notion of the existence of two types of local symmetry of carbon atoms ordering, a 3- and 6-fold one. Potential energy of an atom is expressed as a sum of contributions from rings of equidistant atoms on neighboring layer. Methods are described to compute the radius of rings of equidistant atoms and number of atoms they contain. Exact positions of atoms are found as well, allowing to apply the introduced method in modelling of anisotropic potentials and to be used when twisting between layers is present.
075004
The following article is Open access
Gustavo Álvarez and Igor Kondrashuk
A simple model for QCD dynamics in which the DGLAP integro-differential equation may be solved analytically has been considered in our previous papers arXiv:1611.08787 [hep-ph] and arXiv:1906.07924 [hep-ph]. When such a model contains only one term in the splitting function of the dominant parton distribution, then Bessel function appears to be the solution to this simplified DGLAP equation. To our knowledge, this model with only one term in the splitting function for the first time has been proposed by Blümlein in arXiv:hep-ph/9506403. In arXiv:1906.07924 [hep-ph] we have shown that a dual integro-differential equation obtained from the DGLAP equation by a complex map in the plane of the Mellin moment in this model may be considered as the BFKL equation. Then, in arXiv:1906.07924 we have applied a complex diffeomorphism to obtain a standard integral from Gradshteyn and Ryzhik tables starting from the contour integral for parton distribution functions that is usually taken by calculus of residues. This standard integral from these tables appears to be the Laplace transformation of Jacobian for this complex diffeomorphism. Here we write up all the formulae behind this trick in detail and find out certain important points for further development of this strategy. We verify that the inverse Laplace transformation of the Laplace image of the Bessel function may be represented in a form of Barnes contour integral.
075005
The following article is Open access
Akio Hosoya
We present a protocol of Einstein’s synchronization of two spatially separated clocks on the basis of quantum teleportation in which the Einstein-Podolsky-Rosen (EPR) state plays a central role. Our scheme does not contain the frame defining problem nor the phase contamination problem for the EPR state which appeared in the quantum clock synchronization (Jozsa et al 2000 Phys. Rev. Lett.85, 2010).
075006
The following article is Open access
George Datseris and Ragnar Fleischmann
Electronic transport in nanodevices is commonly studied theoretically and numerically within the Landauer-Büttiker formalism: a device is characterized by its scattering properties to and from reservoirs connected by perfect semi-infinite leads, and transport quantities are derived from the scattering matrix. In some respects, however, the device becomes a ‘black box’ as one only analyses what goes in and out. Here we use the Husimi function as a complementary tool for quantitatively understanding transport in graphene nanodevices. It is a phase space representation of the scattering wavefunctions that allows to link the scattering matrix to a more semiclassical and intuitive description and gain additional insight in to the transport process. In this article we use the Husimi function to analyze some of the fascinating electronic transport properties of graphene, Klein tunneling and intervalley scattering, in two exemplary graphene nanodevices. By this we demonstrate the usefulness of the Husimi function in electronic nanodevices and present novel results e.g. on Klein tunneling outside the Dirac regime and intervalley scattering at a pn-junction and a tilted graphene edge.
075007
The following article is Open access
Yusuf Turek
In general, the state of a quantum system represented by the density operator and its determination is a fundamental problem in quantum theory. In this study, two theoretical methods such as using postselected measurement characterized by modular value and sequential measurements of triple products of complementary observables to direct measurement of matrix elements of density operator of a two photon entangled quantum state are introduced. The similarity and possible feasibilities of those two methods are discussed by considering the previous theoretical and experimental works.
075008
The following article is Open access
Bernie Nickel
075009
The following article is Open access
Salman Nourazar, Hamid Reza Dehghanpour and Mohammad Ramezani
A new approach based on the Adomian decomposition and the Fourier transform is introduced. The method suggests a solution for the well-known magneto-hydrodynamic (MHD) Jeffery-Hamel equation. Results of Adomian decomposition method combined with Fourier transform are compared with exact and numerical methods. The FTADM as an exclusive and new method satisfies all boundary and initial conditions over the entire spatial and temporal domains. Moreover, using the FTADM leads to rapid approach of approximate results toward the exact solutions is demonstrated. The second derivative of Jeffery-Hamel solution related to the similar number of items of recursive terms under a vast spatial domain shows the maximum error in the order of
comparing to exact and numerical solutions. The results also imply that the FTADM can be considered as a precise approximation for solving the third-order nonlinear Jeffery-Hamel equations.
075010
The following article is Open access
Nahomi Kan, Masashi Kuniyasu, Kiyoshi Shiraishi and Kohjiroh Takimoto
We study classical and quantum noncommutative cosmology with a Liouville-type scalar degree of freedom. The noncommutativity is imposed on the minisuperspace variables through a deformation of the Poisson algebra. In this paper, we investigate the effects of noncommutativity of minisuperspace variables on the accelerating behavior of the cosmic scale factor. The probability distribution in noncommutative quantum cosmology is also studied and we propose a novel candidate for interpretation of the probability distribution in terms of noncommutative arguments.
075011
The following article is Open access
Anthony Twum, Samuel Yeboah Mensah, Raymond Edziah and Augustine Arthur
Using the Boltzmann transport equation within the semi-classical approximation with constant relaxation time, we theoretically studied the dynamics of electrons in chiral single wall nanotubes (SWNTs) subjected to a temperature gradient (∇T) in the presence of a combined direct current and high frequency alternating fields. We obtained an expression for the resistivity (ρc) of the SWNTs which varies with temperature and depends among others on material’s chiral angle (θh), dc field strength (Eo) and ac field amplitude (Es). Our results show that chiral SWNTs exhibit metallic behavior with resistivity increasing approximately linearly with temperature over a wide temperature range well above 100 K. Based on the low chiral resistivity obtained for the SWNTs at room temperatures, we propose these materials as good candidates for possible optoelectronic applications.
075012
The following article is Open access
Atsuto Kogane, Kenya Kuwagi, Yoshihide Mawatari, Libby Davoren, Jonathan P K Seville and David J Parker
When a powder bed is vibrated, the particles may move like a fluid, and various flow patterns and surface shapes can exist, depending on the vibration conditions — particularly the frequency and amplitude. A two-dimensional (2D) bed is often used so that the flow pattern in a vibrated powder bed can be directly visualized. Because three-dimensional (3D) fluidization phenomena are complicated, 2D observation is not sufficient. However, it is difficult to observe the internal flow of a 3D fluidized bed. A unique method for doing this is positron emission particle tracking (PEPT), a technique derived from the same physical phenomena as in positron emission tomography (PET). In the most common version of the PEPT technique, the flow in a bed is analyzed by following the behavior of a single radioactively labeled particle. We adopted the PEPT technique to analyze flow patterns in a cylindrical vibrated powder bed. From the particle trajectory data obtained with PEPT, some characteristic internal flow structures that cannot be understood from observing surface particle motion were successfully obtained. However, it is difficult to clarify the detailed mechanisms driving such flow patterns from experimental data alone. Therefore, we also carried out numerical simulations based on the discrete element method (DEM). Because the DEM is a Lagrangian method, its computational time depends on the number of particles, so that simulations were restricted to 2D. In order to compare the simulated results to the experimental ones, the average speeds of particles were obtained. Consequently, it was found that the simulated average speed of particles depends only on the amplitude of the applied vibration. In general, good agreement between simulated and experimental results was obtained, but agreement became poorer under conditions of high frequency and low vibration strength.
075013
The following article is Open access
Thomas Quella
075014
The following article is Open access
T Wodzinski, M Mehrjoo, M Ruiz-Lopez, B Keitel, M Kuhlmann, M Brachmanski, S Künzel, M Fajardo and E Plönjes
We measured the transverse coherence at FLASH2, a variable gap undulator line at the FLASH free-electron laser user facility at DESY in Hamburg. We demonstrate, theoretically and experimentally, a revised version of Young’s double pinhole approach to perform single-shot, repeatable and non-invasive transverse coherence measurements. At beamline FL24 of FLASH2, the transverse coherence of pulses was systematically characterized at wavelengths of 8, 13.5 and 18 nm for different FEL source settings. We determine degrees of coherence of 57% to 87% in the vertical and horizontal direction, respectively. These measurements can facilitate the planning of novel, coherence-based experiments at the FLASH facility.
075015
The following article is Open access
Yasuhiro Sugawara, Masato Miyazaki and Yan Jun Li
The chemical and physical processes on surfaces are significantly influenced by the surface potential of materials. When using the frequency modulation Kelvin probe force microscopy (FM-KPFM), which has been widely used for measuring the surface potential distribution with high spatial resolution, it is very difficult to distinguish the surface potential due to the surface state from that due to the bulk state, because the charge transfer between the surface and bulk states occurs at a low-frequency ac bias voltage in the kHz range. Here, we propose a heterodyne FM-KPFM method using a high-frequency ac bias voltage in the MHz range to distinguish the surface and bulk states. This method is based on the heterodyne effect between the mechanical cantilever oscillation and the oscillating electrostatic force. For the first time, we succeeded in achieving the atomic-resolution imaging of the surface potential on an O-rich TiO2(110) surface using the electrostatic interaction in the MHz range. Furthermore, we could measure the upward and downward band bending on the surface at the atomic scale.
075016
The following article is Open access
Km Akanksha Dubey, Korutla Srikanth, T Rajagopala Rao and Jobin Jose
From a macroscopic point of view, the C60 and the interaction offered by it is considered spherical because of its symmetry. However, the C60 is formed of hexagonal and pentagonal rings of Carbons. Therefore, on a microscopic level, the interaction potential offered in the elastic scattering of projectiles from the C60 is anisotropic. Elastic scattering of Hydrogen atom from the C60 with the interaction taken to be anisotropic is discussed in the present work. The complex radial and angular dependence of H-C60 interaction is calculated using the Density Functional Theory. The scattering resonances are seen to be modified to significant extent in comparison with the isotropic scattering case. However, the parameters of the non-resonant scattering are mostly unaffected due to the anisotropic effects.
075017
The following article is Open access
Maria C Abramo, Dino Costa, Gianpietro Malescio, Gianmarco Munaò, Giuseppe Pellicane, Santi Prestipino and Carlo Caccamo
We show by extensive molecular dynamics simulations that rather accurate predictions of structure factors and x-ray diffraction intensities of molten alkali halides can be achieved in terms of the Born-Huggins-Mayer-Fumi-Tosi rigid ion potential description of these systems. Specifically, the partial structure factors of six ionic melts, namely NaCl, RbCl, LiCl, LiF, NaF and KF, are computed by Fourier inversion of the radial distribution functions obtained from simulation; the x-ray diffraction intensity is then obtained from the calculated partial structure factors. We perform a comparison between the molecular dynamics results and the experimental data obtained via neutron and/or x-ray diffraction. We also determine the total number density and total charge structure factors and document that, in all the salts examined, the peaks in the x-ray intensities fall at wavevectors practically coincident with those of the partial and total structure factors. We then show how to improve upon some limits emerging in the adopted model when applied to molten fluorides. We finally comment on the opportunity to extend to other molten alkali halides, for which experimental x-ray diffraction intensities are available, the assessment of structural predictions according to the scheme outlined here.
075018
The following article is Open access
Mofreh Toba, Fathy M Mustafa and Tamer M Barakat
The purpose of this paper is to simulate and analyze the spectral characteristics of the fiber Bragg grating (FBG) to obtain narrow bandwidth and minimization side lobes in reflectivity. Fiber Bragg grating has made a big revolution in telecommunication systems. The existence of fiber Bragg grating is needed when an optical fiber amplifier and filter are used. They can be used as band reject filter or band pass filter for optical devices. The model equations of the cascaded uniform fiber Bragg grating and different cascaded apodization functions such as, Hamming apodized fiber Bragg grating, Barthan apodized fiber Bragg grating, Nuttal apodized fiber Bragg grating, Sinc apodized fiber Bragg grating and Proposed apodized fiber Bragg grating are numerically handled and processed via specially cast software to achieve maximum Reflectivity, narrow bandwidth without side lobes.
075019
The following article is Open access
Ruchi Saxena, Sumathi Rao and Arijit Kundu
We study the topological phase transitions induced in spin-orbit coupled materials with buckling like silicene, germanene, stanene, etc, by circularly polarised light, beyond the high-frequency regime, and unearth many additional topological phases. We also study the robustness of these phases in the presence of uniform disorder. These phases are characterised by the spin-resolved topological invariants,
,
,
and
, which specify the spin-resolved edge states traversing the gaps at zero quasi-energy and the Floquet zone boundaries respectively. We show that for each phase boundary, and independently for each spin sector, the gap closure in the Brillouin zone occurs at a high symmetry point.
075020
The following article is Open access
Gennadiy Pivnyak, Mendel Pevzner, Andrey Medvedev, Edgar Caseres Cabana, Andrzej Bąk, Andrzej Bajerski and Adam Smoliński
The static field potential in quantum electrodynamics in the space of three dimensions (QED3) produced by a point charge was investigated taking into account the polarization of the vacuum. The polarization operator is taken in the
approximation which was previously used to study the dynamic violation of chiral symmetry in QED3. An approximate analytical analysis is accompanied by numerical calculations; there is a good quantitative agreement between the results obtained using these methods. The case of massive dynamical fermions is considered. The limiting transition to the massless case is analyzed, as well as the confinement problem occurring in this model.
075021
The following article is Open access
Saeed Islam, Muhammad Jawad, KC Gokul, Muhammad Zubair, Hussam Alrabaiah, Zahir Shah, Waris Khan and Anwar Saeed
075022
The following article is Open access
Fuei Pien Chee, Nur Syahirah Zainuddin, Howe Ling Ha and Jedol Dayou
Background and objective: Ozone gas has been used in microorganism treatment and is known as one of the strongest oxidizing agents. The main limitation of ozone is decay rapidly due to its short halflife. In this study, a novel method was established to enhance the production of ozonated water with lower decomposition time. Materials and method: The newly developed prototype was designed with improved technology to increase the kinetic reaction between ozone and water utilizing the parameters of high pressure and continuous flow. Ozonated water produced was examined using dissolved ozone meter with maximum detection of 20 mg L−1. The reaction and decomposition modeling of this system was developed and the dynamic structure of produced ozonated water was investigated using Raman spectroscopy. Results: The findings showed that the newly developed prototype facilitates a higher concentration of ozonated water with an ozone transfer rate of 2.5 L min−1 and a lower decomposition rate with an average half-life 200 min. The results obtained from Raman spectroscopy showed the increases in ozonated water concentration leading to a decrease in the intensity of Raman peak, more likely approaching the Raman intensity of distilled water. Conclusion: This system was proven to be efficient in producing ozonated water at high volume and concentration with longer half-life which suits the domestic and industrial application requirements.
075023
The following article is Open access
C Mainos
A fundamental magnetic flux quantum can be implemented into a free rotating molecule when the interacting molecular electron experiences the maximum possible intrinsic energy uncertainty of a gaussian, transform-limited half-cycle optical photon wavepacket. A magnetic flux resonance condition can be defined at this limit, with photoionization quenching, and the excited molecular electron is drawn into a Rydberg-like spherical surface where a 3D-diffraction pattern is oscillating at the minimum of a bound potential around a primary formed closed electronic loop. The induced rotational motion of the molecular ion core is initiated at the threshold of a robust inertial effect and the dissipated information entropy is the lowest allowed. The integrated quantum possibilities occur in the process as structural properties of a quantized magnetic flux implementation threshold.
075024
The following article is Open access
Setareh Zomorodpoosh, Nicklas Volz, Steffen Neumeier and Irina Roslyakova
The high volume of data resulting from a rapidly increasing number of experiments in materials science necessitates an efficient preparing of the data before any analysis. In addition, due to the large datasets in some experiments, it is essential to reduce the data sample to a small number of representative data points. In this study, three statistical methods for the change-point analysis are tested for the automated selection of representative creep data which provides large possibilities to speed up the data preparation for their further analysis. Moreover, this approach aids the practitioner to produce consistent and unique representative data for each experiment more efficiently.