Table of contents for issue 2, volume 8, Bioinspiration & Biomimetics

Volume 8

Number 2, June 2013

Previous issueNext issue

Special section: Smart solutions from the plant kingdom

Buy this issue in print

    Foreword

  • 020301
    The following article is Free article

    and

    Plants represent almost 99.9% of the biomass of our planet. This means that virtually every environment that can be colonized by life has been explored and populated by plants. To achieve such amazing results while being unable to move from the site of seed germination, plants have evolved an arsenal of solutions that make them suitable for life in the most demanding and extreme conditions. In addition, it is well established that plants are able to show considerable plasticity in their morphology and physiology in response to variability within their environment and to survive extremely diverse environmental conditions and stresses (Fujita et al (2006)). Thus the mechanical properties of plants, the morphology of their structures and their characteristic movements represent a goldmine of solutions that, with appropriate investigation, could be used to obtain new design rules for advanced bioinspired systems and materials in countless applications. Meanwhile, advances in technology, partly related to the adoption of such bio-inspired approaches in design, are opening new opportunities for the application of bioinspired artefacts in biological research.

    This special issue of Bioinspiration and Biomimetics gathers four peer-reviewed articles whose results were partially presented at the International Workshop on Smart Solutions from the Plant Kingdom, held at the Accademia dei Georgofili in Florence, Italy, on 24 October 2011. The workshop was dedicated to presenting and discussing the importance of studying plants to learn from their structure and behaviour, and mimicking these plant features to develop new technologies and systems. This special issue offers multiple perspectives on how plants can represent a source of inspiration for developing new materials, components and mechanisms. At the same time, new tools for better investigating the properties of plants are presented.

    The first article (Thielen et al 2013) presents a study on the biomechanical properties of the foam-like pomelo peel (Citrus maxima) for the development of biomimetic impact damping structures. This pomelo fruit represents an outstanding example of impact resistance, since it can drop from heights of up to 15 m without showing significant outer damage. This impact resistance is due to the hierarchical organization of the fruit peel, and mechanical tests confirmed that the pomelo peel behaviour under cyclic compression can best be interpreted as elasto-plastic hysteresis. The findings of the authors described in this work provide very interesting cues for the development of biomimetic foams with high energy absorption capacity.

    With Sinibaldi et al (2013) we move to the concept of new actuators based on the osmotic principle, characterized by high energy efficiency and low power consumption. Osmotic pressure is responsible for different growing and actuation mechanisms in plants, including fast and reversible movements such as in the cases of Mimosa pudica, Dionaea muscipula, etc. The study provides a dynamic model of two implementations of an osmotic actuator concept. The performance indicators derived by this analysis give a preliminary indication of design targets/constraints (e.g. characteristic size and actuation time, maximum force, energy density) of the envisaged osmotic actuator. These new actuators based on the osmotic principle exploited by plants can find applications in many fields, including biorobotics.

    The focus of Pandolfi and Izzo (2013) is on the investigation and exploitation of plant strategies in seed dispersal for space applications. The typical features of a space mission do not differ so much from the strategies plants need to implement for their seeds’ survival (e.g. operating in harsh environments, the necessity to anchor the structure, requirement of material and packaging efficiency, etc). A classification of different seed dispersal methods is provided, as well as a presentation of analogous bioinspired artificial solutions. Plants, in fact, have conquered almost any surface on our planet and they are the first settlers in a hostile environment, making a path for a habitat that can then be settled by almost all living beings. Consequently, they can offer many interesting ideas for the colonization of extra-environments and space missions.

    The last paper (Russino et al 2013) gives a complementary perspective on the study of plants and, in particular, on the necessity to develop new tools for the investigation of their behaviour and movements in in vivo conditions. Specifically, this work presents novel software to study the kinematics of the plant root tip (apex) and to perform 2D tip detection. This image analysis tool can deal with new growing root tips, with no need of markers, and can handle a massive amount of data with minimal user interaction. The development of computer-aided tools allows us to perform more complex studies on plant behaviour (e.g. kinematic, physiological, and phenotypical studies) and to formulate hypotheses on some unknown aspects of plants. At the same time, an increased knowledge of plant mechanisms leads to new ideas for developing a new generation of artificial bioinspired solutions.

    We are confident of the present and rising role of plants as models to illustrate physical principles or to construct mechanical devices and we hope that this issue can be of great interest, use and benefit to readers.

    References

    Fujita M, Fujita Y, Noutoshi Y, Takahashi F, Narusaka Y, Yamaguchi-Shinozaki K and Shinozaki K 2006 Crosstalk between abiotic and biotic stress responses: a current view from the points of convergence in the stress signaling networks Curr. Opin. Plant Biol.9 436–42

    Pandolfi C and Izzo D 2013 Biomimetics on seed dispersal: survey and insights for space exploration Bioinspir. Biomim.8 025003

    Russino A, Ascrizzi A, Popova L, Mancuso S and Mazzolai B 2013 A Novel Tracking Tool for Analysis of Plant Root Tip Movements Bioinspir. Biomim.8 025004

    Sinibaldi E, Puleo G, Mattioli F, Mattoli V, Di Michele F, Beccai L, Tramacere F, Mancuso S and Mazzolai B 2013 Osmotic actuation modelling for innovative biorobotic solutions inspired by the plant kingdom Bioinspir. Biomim.8 025002

    Thielen M, Schmitt C NZ, Eckert S, Speck T and Seidel R 2013 Structure–function relationship of the foam-like pomelo peel (Citrus maxima)–an inspiration for the development of biomimetic damping materials with high energy dissipation Bioinspir. Biomim.8 025001

  • Special Section Papers

  • 025001

    , , , and

    The mechanical properties of artificial foams are mainly determined by the choice of bulk materials and relative density. In natural foams, in contrast, variation to optimize properties is achieved by structural optimization rather than by conscious substitution of bulk materials. Pomelos (Citrus maxima) have a thick foam-like peel which is capable of dissipating considerable amounts of kinetic energy and thus this fruit represents an ideal role model for the development of biomimetic impact damping structures. This paper focuses on the analysis of the biomechanics of the pomelo peel and on its structure–function relationship. It deals with the determination of the onset strain of densification of this foam-like tissue and on how this property is influenced by the arrangement of vascular bundles. It was found here that the vascular bundles branch in a very regular manner—every 16.5% of the radial peel thickness—and that the surrounding peel tissue (pericarp) attains its exceptional thickness mainly by the expansion of existing interconnected cells causing an increasing volume of the intercellular space, rather than by cell division. These findings lead to the discussion of the pomelo peel as an inspiration for fibre-reinforced cast metallic foams with the capacity for excellent energy dissipation.

  • 025002

    , , , , , , , and

    Osmotic-driven plant movements are widely recognized as impressive examples of energy efficiency and low power consumption. These aspects motivate the interest in developing an original biomimetic concept of new actuators based on the osmotic principle exploited by plants. This study takes a preliminary step in this direction, by modelling the dynamic behaviour of two exemplificative yet relevant implementations of an osmotic actuator concept. In more detail, the considered implementations differ from each other in the way actuation energy storage is achieved (through a piston displacement in the former case, through membrane bulging in the latter). The dynamic problem is analytically solved for both cases; scaling laws for the actuation figures of merit (namely characteristic time, maximum force, maximum power, power density, cumulated work and energy density) as a function of model parameters are obtained for the bulging implementation. Starting from such performance indicators, a preliminary dimensioning of the envisaged osmotic actuator is exemplified, based on design targets/constraints (such as characteristic time and/or maximum force). Moreover, model assumptions and limitations are discussed towards effective prototypical development and experimental testing. Nonetheless, this study takes the first step towards the design of new actuators based on the natural osmotic principle, which holds potential for disruptive innovation in many fields, including biorobotics and ICT solutions.

  • 025003

    and

    Seeds provide the vital genetic link and dispersal agent between successive generations of plants. Without seed dispersal as a means of reproduction, many plants would quickly die out. Because plants lack any sort of mobility and remain in the same spot for their entire lives, they rely on seed dispersal to transport their offspring throughout the environment. This can be accomplished either collectively or individually; in any case as seeds ultimately abdicate their movement, they are at the mercy of environmental factors. Thus, seed dispersal strategies are characterized by robustness, adaptability, intelligence (both behavioral and morphological), and mass and energy efficiency (including the ability to utilize environmental sources of energy available): all qualities that advanced engineering systems aim at in general, and in particular those that need to enable complex endeavors such as space exploration. Plants evolved and adapted their strategy according to their environment, and taken together, they enclose many desirable characteristics that a space mission needs to have. Understanding in detail how plants control the development of seeds, fabricate structural components for their dispersal, build molecular machineries to keep seeds dormant up to the right moment and monitor the environment to release them at the right time could provide several solutions impacting current space mission design practices. It can lead to miniaturization, higher integration and packing efficiency, energy efficiency and higher autonomy and robustness. Consequently, there would appear to be good reasons for considering biomimetic solutions from plant kingdom when designing space missions, especially to other celestial bodies, where solid and liquid surfaces, atmosphere, etc constitute and are obviously parallel with the terrestrial environment where plants evolved. In this paper, we review the current state of biomimetics on seed dispersal to improve space mission design.

  • 025004

    , , , , and

    The growth process of roots consists of many activities, such as exploring the soil volume, mining minerals, avoiding obstacles and taking up water to fulfil the plant's primary functions, that are performed differently, depending on environmental conditions. Root movements are strictly related to a root decision strategy, which helps plants to survive under stressful conditions by optimizing energy consumption. In this work, we present a novel image-analysis tool to study the kinematics of the root tip (apex), named analyser for root tip tracks (ARTT). The software implementation combines a segmentation algorithm with additional software imaging filters in order to realize a 2D tip detection. The resulting paths, or tracks, arise from the sampled tip positions through the acquired images during the growth. ARTT allows work with no markers and deals autonomously with new emerging root tips, as well as handling a massive number of data relying on minimum user interaction. Consequently, ARTT can be used for a wide range of applications and for the study of kinematics in different plant species. In particular, the study of the root growth and behaviour could lead to the definition of novel principles for the penetration and/or control paradigms for soil exploration and monitoring tasks. The software capabilities were demonstrated by experimental trials performed with Zea mays and Oryza sativa.

  • Papers

  • 026001

    , , , , , , and

    In underwater locomotion, extracting meaningful information from local flows is as desirable as it is challenging, due to complex fluid-structure interaction. Sensing and motion are tightly interconnected; hydrodynamic signals generated by the external stimuli are modified by the self-generated flow signals. Given that very little is known about self-generated signals, we used onboard pressure sensors to measure the pressure profiles over the head of a fusiform-shape craft while moving forward and backward harmonically. From these measurements we obtained a second-order polynomial model which incorporates the velocity and acceleration of the craft to estimate the surface pressure within the swimming range up to one body length/second (L s−1). The analysis of the model reveals valuable insights into the temporal and spatial changes of the pressure intensity as a function of craft's velocity. At low swimming velocities (<0.2 L s−1) the pressure signals are more sensitive to the acceleration of the craft than its velocity. However, the inertial effects gradually become less important as the velocity increases. The sensors on the front part of the craft are more sensitive to its movements than the sensors on the sides. With respect to the hydrostatic pressure measured in still water, the pressure detected by the foremost sensor reaches values up to 300 Pa at 1 L s−1 swimming velocity, whereas the pressure difference between the foremost sensor and the next one is less than 50 Pa. Our results suggest that distributed pressure sensing can be used in a bimodal sensing strategy. The first mode detects external hydrodynamic events taking place around the craft, which requires minimal sensitivity to the self-motion of the craft. This can be accomplished by moving slowly with a constant velocity and by analyzing the pressure gradient as opposed to absolute pressure recordings. The second mode monitors the self-motion of the craft. It is shown here that distributed pressure sensing can be used as a speedometer to measure the craft's velocity.

  • 026002

    and

    A fundamental feature of pennate muscles is that muscle fibers are oriented at an angle to the line of action and rotate as they shorten, becoming more oblique throughout a contraction. This change in fiber orientation (pennation angle) can amplify the shortening velocity of a fiber and increase output velocity of the muscle. The velocity advantage resulting from dynamic changes in pennation angle can be characterized as a gear ratio (muscle velocity/fiber velocity). A recent study has shown that a pennate muscle's gear ratio varies automatically depending on the load such that a muscle operates with a high gear during rapid contractions and low gear during forceful contractions. We examined whether this variable gearing behavior can be replicated in a pennate array of artificial muscles. We used McKibben type pneumatic actuators, which shorten in tension when filled with compressed gas. Similar to muscle fibers, the actuators expand radially during shortening, a feature thought to be a critical part of the variable gearing mechanism in pennate muscles. We arranged McKibben actuators in an array oriented to mimic a pennate muscle, and quantified the system's gear ratio during contraction against a range of loads. Video was used to measure the gear ratio during each contraction. We find that similar to pennate muscles, the gear ratio decreases significantly with increasing load and that variable gearing results from load-dependent variation in the amount of actuator rotation. These results support the idea that variable gearing in pennate muscles is mediated by difference is fiber rotation and the direction of muscle bulging. The behavior of our artificial muscle array also highlights the potential benefits of bio-inspired architectures in artificial muscle arrays, including the ability to vary force and speed automatically in response to variable loading conditions.

  • 026003

    and

    Soft robotics offers the unique promise of creating inherently safe and adaptive systems. These systems bring man-made machines closer to the natural capabilities of biological systems. An important requirement to enable self-contained soft mobile robots is an on-board power source. In this paper, we present an approach to create a bio-inspired soft robotic snake that can undulate in a similar way to its biological counterpart using pressure for actuation power, without human intervention. With this approach, we develop an autonomous soft snake robot with on-board actuation, power, computation and control capabilities. The robot consists of four bidirectional fluidic elastomer actuators in series to create a traveling curvature wave from head to tail along its body. Passive wheels between segments generate the necessary frictional anisotropy for forward locomotion. It takes 14 h to build the soft robotic snake, which can attain an average locomotion speed of 19 mm s−1.

  • 026004

    and

    A new paradigm for selective pumping of fluids in a complex network of channels in the microscale flow regime is presented. The model is inspired by internal flow distributions produced by the rhythmic wall contractions observed in many insect tracheal networks. The approach presented here is a natural extension of previous two-dimensional modeling of insect-inspired microscale flow transport in a single channel, and aims to manipulate fluids efficiently in microscale networks without the use of any mechanical valves. This selective pumping approach enables fluids to be transported, controlled and precisely directed into a specific branch in a network while avoiding other possible routes. In order to present a quantitative analysis of the selective pumping approach presented here, the velocity and pressure fields and the time-averaged net flow that are induced by prescribed wall contractions are calculated numerically using the method of fundamental solutions. More specifically, the Stokeslets-meshfree method is used in this study to solve the Stokes equations that govern the flow motions in a network with moving wall contractions. The results presented here might help in understanding some features of the insect respiratory system function and guide efforts to fabricate novel microfluidic devices for flow transport and mixing, and targeted drug delivery applications.

  • 026005

    and

    As a flow-sensing organ, the lateral line system plays an important role in various behaviors of fish. An engineering equivalent of a biological lateral line is of great interest to the navigation and control of underwater robots and vehicles. A vibrating sphere, also known as a dipole source, can emulate the rhythmic movement of fins and body appendages, and has been widely used as a stimulus in the study of biological lateral lines. Dipole source localization has also become a benchmark problem in the development of artificial lateral lines. In this paper we present two novel iterative schemes, referred to as Gauss–Newton (GN) and Newton–Raphson (NR) algorithms, for simultaneously localizing a dipole source and estimating its vibration amplitude and orientation, based on the analytical model for a dipole-generated flow field. The performance of the GN and NR methods is first confirmed with simulation results and the Cramer–Rao bound (CRB) analysis. Experiments are further conducted on an artificial lateral line prototype, consisting of six millimeter-scale ionic polymer–metal composite sensors with intra-sensor spacing optimized with CRB analysis. Consistent with simulation results, the experimental results show that both GN and NR schemes are able to simultaneously estimate the source location, vibration amplitude and orientation with comparable precision. Specifically, the maximum localization error is less than 5% of the body length (BL) when the source is within the distance of one BL. Experimental results have also shown that the proposed schemes are superior to the beamforming method, one of the most competitive approaches reported in literature, in terms of accuracy and computational efficiency.

  • 026006

    The axoneme is the skeleton and motor axis of flagella and cilia in eukaryotic organisms. Basically it consists of a series of longitudinal fibers (outer doublets of microtubules) that design a cylinder and whose sliding, due to the coordinated activities of dedicated molecular motors (the dynein arms), is converted into a bending because outer doublets pairs are stabilized by elastic links (the nexine molecules). In spite of these interesting mechanical properties, mechanical and robotics engineers have never considered this amazing molecular machinery as a model. The aim of this paper is to propose the robotic design and the kinematic modeling of the ‘3 + 0’ axoneme that makes motile the flagellum of Diplauxis hatti, the simplest that exists. The model that we propose bends and twists and combines the two movements. It is able to propagate wave trains that could be involved in the development of biomimetic actuators of various mechanisms such as (sub)aquatic robotic propellers as well as robotic trunks.

  • 026007

    , and

    To discover principles of flipper-based terrestrial locomotion we study the mechanics of a hatchling sea turtle-inspired robot, FlipperBot (FBot), during quasi-static movement on granular media. FBot implements a symmetric gait using two servo-motor-driven front limbs with flat-plate flippers and either freely rotating or fixed wrist joints. For a range of gaits, FBot moves with a constant step length. However, for gaits with sufficiently shallow flipper penetration or sufficiently large stroke, per step displacement decreases with each successive step resulting in failure (zero forward displacement) within a few steps. For the fixed wrist, failure occurs when FBot interacts with ground disturbed during previous steps, and measurements reveal that flipper generated forces decrease as per step displacement decreases. The biologically inspired free wrist is less prone to failure, but slip-induced failure can still occur if FBot pitches forward and drives its leading edge into the substrate. In the constant step length regime, kinematic and force-based models accurately predict FBot's motion for free and fixed wrist configurations, respectively. When combined with independent force measurements, models and experiments provide insight into how disturbed ground leads to locomotory failure and help explain differences in hatchling sea turtle performance.

  • 026008

    , and

    Horseshoe bats (family Rhinolophidae) have sophisticated biosonar systems with outer ears (pinnae) that are characterized by static local shape features as well as dynamic non-rigid changes to their overall shapes. Here, biomimetic prototypes fabricated from elastic rubber sheets have been used to study the impact of these static and dynamic features on the acoustic device characteristics. The basic shape of the prototypes was an obliquely truncated horn augmented with three static local shape features: vertical ridge, pinna-rim incision and frontal flap (antitragus). The prototype shape was deformed dynamically using a one-point actuation mechanism to produce a biomimetic bending of the prototype’s tip. In isolation, the local shape features had little impact on the device beampattern. However, strong interactions were observed between these features and the overall deformation. The further the prototype tip was bent down, the stronger the beampatterns associated with combinations of multiple features differed from the upright configuration in the prominence of sidelobes. This behavior was qualitatively similar to numerical predictions for horseshoe bats. Hence, the interplay between static and dynamic features could be a bioinspired principle for affecting large changes through the dynamic manipulations of interactions that are sensitive to small geometrical changes.