Papers
General and interdisciplinary, including biophysics, geophysics and astrophysics
045001
Nikhil Pandey, Nitesh Kumar Singh, Anshul Agarwal and Balraj Singh
Scientists continually enhance solar cell performance to address the growing energy demand. The SCAPS 1D programming software has been implemented to analyze a perovskite solar cell (PSC) based on inorganic Cs2AgInBr6. The charge carrier layers, SnS2 as electron transport layer (ETL) and Zn3P2 as hole transport layer (HTL) are tailored for maximum efficiency, with ideal width of 150 nm and 250 nm, sequentially and the absorber layer width of 600 nm. Some constraints, such as the defect density (Nt), active layer width, and the properties of charge carrier layers, interface defect density, the temperature of FTO/Zn3P2/Cs2AgInBr6/SnS2, and thickness are optimized to improve device performance. This fully inorganic design is chosen for its remarkable stability and high efficiency, achieving a power conversion efficiency (eta) of 27.48%. This research is encouraged by this effort to develop stable and low-toxic PSCs for the solar cell market.
045002
Feng Li, Bo Xu, Chenchen Wang, Shishuo Jin and Zhi Li
Dynamic loading disturbances significantly intensify the damage and failure processes of coal-rock masses, thereby triggering dynamic disasters. However, the failure processes, underlying mechanisms, and vibration response characteristics remain unclear. A self-developed triaxial loading impact testing system was utilized to experimentally investigate the damage-failure behavior and vibration response characteristics of multi-layer composite coal bodies under impact loading. The experimental results show that crack propagation on the coal surface can be divided into four stages: the initial stage, crack initiation stage, propagation stage and stabilization stage. Cracks propagate radially from the center of the coal body toward the surrounding boundaries, with radial cracks developing along the short-axis direction initiating earlier than those along the long-axis direction. Ultimately, surface cracks exhibit ‘O-*’ and ‘*’-shaped failure patterns. After programmed processing of the acceleration signals recorded at each measurement point, the corresponding amplitude and energy characteristics were derived. Among all intrinsic mode functions (IMFs) obtained from signal decomposition, the IMF1 component exhibits the highest energy proportion and plays a dominant role in the impact-induced coal failure. As the number of coal layers increases, the Hilbert marginal spectrum and Hilbert energy spectrum at different measurement points display varying trends. This study elucidates the damage-failure modes, crack evolution laws, and vibration response characteristics of multi-layer combined coal bodies, providing a reference for future investigations into coal-rock dynamic disasters.
045003
Sachin Sachin and Ajay Kumar
High entropy alloys (HEAs) have attracted significant interest in recent years due to their exceptional structural and mechanical properties, yet their film behaviour is underexplored. The AlCoCrCuFeNiTi HEA has been studied for bulk, but has not been studied for film synthesis via magnetron sputtering and the role of substrate temperature on the HEA. In this study, films of AlCoCrCuFeNiTi have been synthesized via magnetron co-sputtering at different substrate temperatures (room temperature, 250 °C and 500 °C) on Si substrates. The study investigates the effect of substrate temperature on phases, composition, microstructure, and mechanical properties of AlCoCrCuFeNiTi films. The film synthesized at room temperature was amorphous, and the film synthesized at high temperature showed crystallinity. The 250 °C film had a mix of face-centered cubic and body-centered cubic phases, and the 500 °C film had primary face-centered cubic and B2 phases. The films had columnar cross sections and the 500 °C film had equiaxed grains and prominent grain boundaries. The 500 °C film had the highest average surface roughness of 5.02 nm, driven by grain growth. A maximum contact angle of 117.67° was achieved for the 500 °C film. At higher substrate temperatures, the film had better mechanical properties than the film at room temperature. The 250 °C film had the highest hardness of 4.82 GPa, and the 500 °C film had the highest reduced Young’s modulus of 103.92 GPa. The higher mechanical properties at higher substrate temperatures were due to the improved mobility of atoms at higher substrate temperatures, which allowed for compact, dense films. The substrate temperature has been found to have a strong impact on the phase, microstructure and mechanical properties of AlCoCrCuFeNiTi films. The study outcomes offer valuable insights for designing AlCoCrCuFeNiTi HEA films. Further study can be done on the effect of substrate bias on the behaviour of AlCoCrCuFeNiTi films.
045004
Ferhat Güney, Timur Şahin and Ahmet Dervişoğlu
We present a new practical atomic line list for the optical and near-infrared spectral regions (3850–8220 Å), specifically tailored for the spectroscopic analysis of hot B-type stars. Compiled through careful merging and expansion of established literature sources, this list addresses the critical lack of comprehensive and homogeneous atomic data for hot star spectroscopy. The line list was rigorously validated using high-resolution HERMES and UCLES spectra of the benchmark star HR 1765 and FOCES spectra of the Algol-type binary system u Herculis. By performing a homogeneous local thermodynamic equilibrium (LTE) abundance analysis with literature stellar parameters, we successfully reproduced the published results for the single star HR 1765 and obtained a revised abundance pattern for the mass-gaining primary component of u Her. A key aspect of our methodology is the subsequent application of NLTE calculations for several key species (He, Ne, and Si). The spurious helium enrichment suggested by LTE for HR 1765 was resolved, yielding an NLTE abundance consistent with the local cosmic standard, thereby mitigating the systematic biases inherent in the LTE approach and yielding abundances consistent with the cosmic standards. The results for u Her confirm the presence of CNO-processed material on its surface, which is characterized by nitrogen enrichment and carbon depletion. The expanded coverage of our line list enabled the first spectroscopic detection of Cl ii in HR 1765 and the first measurement of Ne abundance in u Her. Furthermore, we report the first abundance determination of P iii, S ii/iii, Ar ii, and Fe iii in u Her. The consistency of our results with those of previous studies employing different methodologies underscores the robustness and reliability of the compiled line list, establishing it as a valuable and readily applicable resource for future spectroscopic studies on hot stars, particularly in the context of interacting binary systems.
045005
The following article is Open access
C García-Segundo, F Filbir, E I Fuentes-Oliver and V M Moock
The concept of photoacoustic (PA) group velocity (vg) is largely missed in the related transport theory. Generally it is assumed that the PA signal propagation occurs at a constant velocity, and thus overlooking the attenuation and dispersion effects. In practice, the PA signals propagate as material waves coupled to the sample, and thus inherently experiencing wave dispersion. In this work, such limitation is bypassed using a modified wave-function formulation in which both amplitude attenuation and wave dispersion arise naturally from a Heaviside-type (Cattaneo) transport equation operating on the velocity potential. Thus the approach, is valid for homogeneous media, characterised by a frequency-dependent PA absorption coefficient and an explicit expression for the group velocity. The resulting model accurately predicts the experimentally observed amplitude decay, bandwidth reduction, and peak-frequency shifts of PA spectra as functions of propagation distance. Furthermore, it is consistent with local thermal equilibrium and energy conservation requirements, and provides the necessary framework to satisfy Biot’s group-velocity theorem and, consequently, the macroscopic Debye kinetic theory. This analysis also supports the interpretation of the PA signal as a dispersive wave packet propagating with an average group velocity, whose velocity distribution is governed by its spectral content.
045006
Sourav Saha, Sukanta Roy, Mukul Banerjee, Sanjeev Kumar Mahato and Sudip Banerjee
Recent developments in solar panel systems emphasise the need to enhance their efficiency. However, a rise in PV panel temperature creates a major hindrance to enhance efficiency. In this regime, researchers have employed different cooling techniques; notably, the utilisation of phase change material (PCM) is extensively recognised. The present study proposes the use of cost-effective C28H58 Octacosane as PCM in PV panels to enhance the cooling performance. Solar photovoltaic panels, each capable of producing up to 10 W of electricity, are utilized for the experiments. Additionally, the effects of different tilt angles (15°, 23°, 30°) on cooling performance are also investigated. Temperature dispersion over the front surfaces are also analysed. The findings demonstrate that the largest temperature dispersion is seen in the front segment of the PV panels, whereas the PCM panel exhibits the most uniformly low temperatures. A typical temperature reduction in the PV PCM 5.4% at 15°, 14.9% at 23°, and 11.6% at 30° is observed. Additionally, C28H58 Octacosane PCM with 18 mm thickness exhibits 16.47% growth in the generation of electrical power in comparison to the reference panel (PV-R). At an angle of inclination of 23°, the PV-PCM panel demonstrates a 17.43% increase in average efficiency compared to PVR. The maximum exergy efficiency of PV-PCM systems increased by 18.10%. At 23° best result is obtained as this angle is close to the latitude of Aizawl, Mizoram. Finally, the efficacy of the present study was examined by comparing the output values with existing literature.
045007
Rui Li, Qi Li and Haichao Yuan
In this study, a self-similar chiral metamaterial (SSCM) is proposed. The proposed design replaces each junction of the fractal hexagonal framework with chiral units, effectively combining the broadband bandgap characteristics of fractal structures with the low-frequency bandgap advantage of chiral architectures, thus achieving an exceptionally wide low-frequency bandgap., while the vibration isolation performance is further enhanced through geometrical parameterization.Initially, a primary hexagonal unit cell is constructed, and a secondary hexagonal configuration is generated according to the fractal principle. Each connection point is then substituted with a chiral unit, and a pinned resonator is introduced inside the chiral element to form the final SSCM model. The proposed design is capable of generating a broad bandgap in the low-frequency region.By adjusting the structural morphology and geometric parameters of the metamaterial, the optimal configuration satisfying geometric integrity is obtained, and the variation of the bandgap with geometric parameters is analyzed. The finite element method (FEM) is employed to simulate the elastic wave propagation within the model, verifying the feasibility of the theoretical predictions. This metamaterial provide new insights and design strategies for the development of acoustic metamaterials in low-frequency noise and vibration control applications.
045008
Shi-Yu Li, Long-Xiang Li, Xia Zhou and Zhong-Wen Feng
This paper analyzes photon orbits around a rotating black hole in Einstein-Bumblebee gravity, where Lorentz symmetry is broken. We solve the Hamilton-Jacobi equation to model the photon motion, which shows significant deviations from predictions of general relativity. A key finding is a critical inclination angle that determines the number and position of photon orbits. All orbits outside the event horizon are unstable. Importantly, the critical impact parameter decreases with stronger Lorentz violation, providing a potential observational test to distinguish this theory from standard gravity.
045009
Lingping Chen, Yanchao Zhang, Guoqiang Chen, Yuhang Chou and Samaila Umaru
This study investigates the effects of surface texturing on the leakage and tribological performance of finger seals via bench-scale experiments to address the aeroengine dynamic sealing requirements. Circular array textures (10% density, 200 μm diameter) were fabricated on rotor raceways. The tests included static leakage (ambient/450 °C) and dynamic variable-speed tests under constant pressure. Laser confocal interferometry characterizes wear morphologies to reveal texture-sealing mechanisms. The results show that texturing reduces leakage by 15% compared to non-textured surfaces, which is attributed to the enhanced gas-film hydrodynamic pressure. The texture inhibition of the leakage growth intensifies with higher pressure differentials. Rotor speed elevations further reduce leakage via aerodynamic and levitation effects, although deceleration hysteresis increases leakage. This is mitigated by a wide-temperature wear coating at 450 °C. Tribological analysis shows that textures decrease wear scar width/roughness by debris trapping and stress reduction, shifting wear from severe abrasive/adhesive (nontextured) to mild abrasive (textured). These findings validate textured finger seals for extremely high-T/speed applications, confirming texturing as a strategy for concurrent leakage control and tribological optimization.
Quantum optics, processing and information
045101
Xiaohui Wang, Liang Xu, Jiawei Rui, Hui Zhang, Xinchen Ji, Zhiang Gao, Chenglong Jiang, Shanman Cheng, Yan Hong, Zewen Jing et al
Traditional Gaussian-light-based holography mainly uses the amplitude and phase of light as degrees of freedom for propagating information, and the channel capacity is physically limited due to lack of more multiplexed dimensions. For enhancing the capacity and security of a hologram, a novel hologram is proposed by employing multiplexed orbital angular momentum (OAM) modes and a double random phase encoding (DRPE) method. The DRPE method, which employs two statistically independent random phase masks in the input plane and Fourier transform plane respectively, combines the random phase masks with the original information, making it virtually impossible to retrieve the original data without knowledge of both random phase keys. Besides, the employed OAM modes also can be used to encrypt the holograms due to the fact that only the correctly-selected OAM beams can recover the primordially-propagated information. For further increasing the security of a hologram, a DRPE method is also adopted in both spatial and frequency domains. By implementing DRPE in dual domains, the encryption process creates a multi-layered security architecture, which significantly increasing the computational complexity required for unauthorized decryption. For verifying the valid of the proposed scheme, a verification scheme is also established, where three OAM modes are employed. The achieved results demonstrate that the propagated three gray images can be successfully reconstructed with a higher peak signal to noise ratio (PSNR). In addition, the recovered images show that the proposed holograms have a stronger anti-noise performance under three different noises, and have a stronger sensitivity to key. The decrypt sequence between spatial domain and frequency domain also makes an important impact on the reconstructed images, which can further improve the security of the hologram during information propagation. Consequently, the proposed method can significantly enhance the capacity and security performance of holographic information.
045102
Namrata Singh and Ram Chandra Singh Chauhan
Beyond 5G (B5G), wireless networks incorporate technologies like millimeter-wave (mmWave) and ultra-dense networks (UDNs). These technologies are intended to meet the growing demand for higher data rates, reduced latency, and greater connectivity. Nevertheless, the deployment of these technologies has raised many challenges. Ensuring an effective handover is one of the most significant challenges, as providing a smooth connection and uninterrupted service is necessary. Conventional handover processes do not work well under dynamic network environments. This leads to frequent handovers and handover failures (HOFs). To overcome this, this paper proposes a new optimization method of Fuzzy Logic-Differential Evolution Algorithm (FL-DEA). This strategy will maximize two important Handover Control Parameters (HCPs): Handover Margin (HOM) and Time to Trigger (TTT). FL-DEA combines the uncertainty-processing capability of fuzzy logic and the global optimization capability of the Differential Evolution (DE) Algorithm. The fuzzy logic controller estimates HOF and Handover Ping-Pong (HOPP) probabilities using user speed, HOM, and TTT. These preliminary estimates are then optimized by the DE algorithm, which minimizes a cost function that aims to minimize both HOF and HOPP probabilities. The given method is compared with the current HCP optimization methods, such as Particle Swarm Optimization (PSO) and Fuzzy Logic Controller. According to simulation results, FL-DEA performs better with the least value of handover failures, minimal the ping-pong effect, and improved Quality of Service (QoS) in dynamic B5G wireless networks.
045103
The following article is Open access
Santanu Mondal and R Cabrera-Trujillo
In quantum physics, the scattering of a free particle by an impurity leads to the Ramsauer-Townsend effect, characterized by resonances in the cross section for transmission and reflection of the incident particle. In this work, we analyze this problem within the context of quantum information theory. In particular, we study the Shannon and Fisher entropy, as well as the Heisenberg uncertainty relations, to analyze the fragmentation of a wave packet in collision dynamics. As a primary contribution of this work, we note that these properties are directly related to each other through the same reflection and transmission coefficients as those of the Ramsauer-Townsend effect. Furthermore, we observe that the Heisenberg uncertainty principle satisfies the minimum value, i.e. ℏ/2, for the transmitted wave packet at resonance transmission and a maximum at higher fragmentation of the wave packet. We obtain that at resonance transmission, the reflected contribution to the uncertainty principle is zero with no violation of the Heisenberg principle. This leads, consequently, to the violation of it by the reflected wave packet, as there is no reflection. Moreover, the Shannon and Fisher quantum information entropy is found to be directly connected to Heisenberg’s uncertainty principle for a dynamical system. Finally, we establish that these effects require the proper description of the time-dependent spreading of the wave packet to account for the proper dynamics.
045104
Xiangfeng Kong, Hui Song, Fangfang Zhang, Lei Kou and Zhen Yu
Offshore wind farm monitoring data faces challenges such as large data volumes, susceptibility to tampering, information leakage, and malicious attacks during transmission and storage. To address these issues, a lightweight encryption method is proposed. Firstly, to overcome the limitations of discontinuous parameter intervals and chaotic degradation in existing chaotic systems, a modular chaotic method is proposed to construct a two-dimensional discrete chaotic system (2D-DCS). This approach facilitates the dynamic adjustment of the Lyapunov exponent, effectively preventing chaotic degradation within continuous parameter domains. Next, chaotic sequences generated by the 2D-DCS are used for dynamic DNA encoding of the data to produce nucleotide sequences, which are then processed using extended DNA operation rules (from 4 to 8) to further enhance the data’s diffusion. Finally, simulation experiments and security tests are conducted to validate the proposed method. The results show that the encrypted data achieves an average information entropy of 7.9993. Moreover, compared to some existing chaotic encryption algorithms, the proposed method reduces encryption/decryption delays by 38%-52%, fully meeting the real-time transmission and security requirements of offshore wind farm monitoring data.
045105
Lei Wang, Liu Liu, Li-Ming Zhao and Ming-Xing Luo
The sum-of-squares (SOS) decomposition of Bell operators is a crucial tool for analyzing quantum correlations and verifying nonclassical behaviors. Building upon Gell-Mann’s generalization of Pauli matrices, we derive explicit forms for SOS decompositions of general Bell operators. We establish the minimal subsystem dimension required to represent Bell operators in specific tensor product spaces and obtain concrete decomposition expressions. Furthermore, we construct corresponding quantum states and measurement settings that exhibit quantum violations of classical bounds, with our approach extending naturally to isotropic states.
Mathematical physics, complex systems and nonlinear dynamics
045201
Shuyue Xue and Hongyan Zang
This study proposes a three-dimensional axisymmetric chaotic system with multiple coexisting attractors, including the coexistence of chaotic and periodic attractors, chaotic and chaotic attractors, as well as periodic and periodic attractors. Meanwhile, amplitude controllability and offset boosting are significant features of the system, which can achieve bias and amplitude control of chaotic signals with only a single parameter, providing flexibility for practical applications of the system. In addition, we find that the C0 complexity of the new system is higher than that of existing systems with similar structures, and the system has passed strict NIST SP800-22 certification testing, indicating that the new system can generate high-quality pseudo-random sequences. At the same time, the system is also implemented on a DSP hardware platform, demonstrating its physical feasibility and highlighting its strong potential for applications in image encryption and secure communication. Finally, this work develops a new Lyapunov condition that satisfies the predefined time and proposes a sliding mode control strategy for the new chaotic system; these features enable the system to achieve predefined time synchronization under various parameters and initial circumstances.
045202
Bo Gao, Yuxuan Yang, Xi Wang, Zhenzhen Li, Jing Wang and Yang Liu
We investigate the outbreak detection and source localization problem in complex networks, which underpin real-world tasks such as epidemic surveillance and misinformation control, as a bi-objective optimization challenge under resource constraints. The proposed DI-NSGA-II algorithm introduces node-set-based genetic operators that preserve network structural properties while exploring the discrete configuration space, coupled with a hybrid crowding distance metric that simultaneously maintains diversity in both objective and decision spaces. Through adaptive crossover-mutation dynamics and dual-stage selection mechanisms, the algorithm achieves an effective balance between exploration of the solution landscape and exploitation of promising regions. Comprehensive experiments across 126 networks reveal that DI-NSGA-II outperforms existing centrality-based and heuristic methods by 88.26% on synthetic networks and 167.68% on empirical networks. The algorithm demonstrates robust performance across diverse network topologies ranging from random graphs to scale-free structures, maintaining stability under varying infection dynamics and observer densities. These results provide insights into optimal sensor placement strategies for monitoring spreading processes in complex systems, with direct implications for the design of efficient surveillance and control schemes in real-world networks.
045203
Pratik Joshi and Bhumeshwar Patle
The stress and deflection responses of the graded structures are predicted numerically under elevated temperature conditions, considering elastic and elastoplastic mathematical models. In this regard, a third-order kinematic model is assumed, considering an equivalent single-layer theory based on the finite element (FE) technique. Firstly, the monotonic behaviour of the model is confirmed. Further, the model’s accuracy is checked by comparing the deflection responses with published data under normal and high-temperature loading. The developed model is used further to generate results by varying the different geometry-dependent input constraints. Finally, a comprehensive discussion of the influence of input parameters on the final numerical findings is enumerated in detail.
045204
Sa Li, Jingjing You, Pengda Ye, Yinlong Zhu and Yuzhu Cheng
In this paper, an invertible ‘5-4’ Stewart-type parallel mechanism (STPM) with analytical forward kinematics (FK) solutions is designed, and the relationship between FK and static stiffness is revealed. First, in order to reduce the structural coupling of STPMs, novel triple and double overlapping Hooke joints are developed. Then, a tetrahedron-based kinematic algorithm is proposed to solve the analytical FK by introducing one virtual limb for the ‘5-4’ STPM and two virtual limbs for the inverted ‘5-4’ STPM. Numerical experiments verify the accuracy of the algorithm. Subsequently, velocity Jacobian matrices and static stiffness models are established for the analysis of these two mechanisms. The finite element simulation results demonstrate the effectiveness of the static model, and the maximum relative error is less than 24.84%. Finally, the kinematic repeated roots and stiffness degradation of two STPMs are analyzed respectively, and the results show that the repeated-root FK leads to directional stiffness loss. These achievements provide theoretical foundations for the practical applications of reconfigurable STPMs.
045205
Zhenlong Man, Tianyou Liu, Ze Yu, Jinyu Zhou and Chang Gao
In response to the privacy leakage risks faced by medical data transmission to the cloud in areas with weak networks, existing solutions often struggle to balance lightweight and strong security. This paper proposes a lightweight medical image secure transmission scheme based on edge computing: Firstly, Non-Subsampled Contourlet Transform (NSCT) is utilized at the terminal to fuse CT and MRI images; Then design a key generator based on the Fuchsian Vortex Coupled Map Lattice (FV-CML) spatio-temporal chaotic system; Furthermore, a lightweight encryption algorithm for Spiral-Peano curve 3D section fractal scrambling and Quaternionic chord bit-domain flip diffusion is proposed. After data desensitization is completed at the edge node, it is uploaded to the cloud. Experiments show that this algorithm can effectively resist common attacks, and the encryption takes only about 0.28 seconds, providing a practical solution for the secure transmission of medical data in weak network environments.
045206
Yanlin Zhu, Xiaowei Meng, Juncai Zhou, Hua Zhang and Quanjun Wu
The research studies the prescribed-time synchronization of directed Kuramoto oscillator networks (KONs) subject to communication delays via pinning control. Firstly, a novel lemma on prescribed-time stability is established, in which the addition of the constant term allows the temporal derivative of the selected Lyapunov function not to be strictly non-positive over the entire interval. Secondly, based on the lemma, some sufficient conditions that guarantee prescribed-time phase synchronization (PTPS) and prescribed-time frequency synchronization (PTFS) in networks containing a directed spanning tree (DST) are derived, respectively. The two proposed control schemes guarantee the PTPS and the PTFS for such networks by controlling only the root node, while significantly reducing requirements on network connectivity, coupling strength, and initial condition distribution including both phase states and frequency states. In large-scale networks, the time delay for network-wide information exchange is non-negligible. To address this, a distributed pinning strategy, developed by extending the single root node pinning strategy, guarantees synchronization within a prescribed time horizon. Finally, the efficiency of two control schemes are demonstrated through some numerical simulations.
045207
Xianyang Xie, Dongfang Yan, Yuming Feng and Xiangguang Dai
This paper introduces a novel four-dimensional (4D) chaotic system based on a new composite memristor. The system is constructed by coupling a flux-controlled memristor, which uniquely integrates both piecewise and cubic nonlinearities, into a three-dimensional Jerk system. Dynamic analysis reveals that the proposed system exhibits rich dynamical behaviors, including a period-doubling route to chaos and, most significantly, the phenomenon of multistability with coexisting symmetric attractors. The system’s chaotic properties and physical realizability are confirmed through Lyapunov exponent analysis and LTspice circuit simulations, respectively. To demonstrate its practical utility, the chaotic sequences generated by the system are applied to an image encryption task. The results confirm that the system can produce sequences with excellent cryptographic properties, showing great potential for applications in secure communications.
045208
Abdelhak Hadj, Zineb Bouslah and Hacene Saker
We explore direct and inverse problems for the bi-Laplace equation within a bounded, simply connected planar domain. The direct problem is recast into a system of Fredholm integral equations via Green-type identities, ensuring the existence and uniqueness through functional analysis in appropriate Sobolev spaces. For the inverse problem, we consider the reconstruction of missing Cauchy boundary data on a non accessible portion of the domain, where Riquier-Neumann-type conditions are imposed. To counteract the intrinsic ill-posedness of this data completion task, the problem is reduced to a nonlinear boundary integral system, which is stabilized through Tikhonov regularization. Numerical investigations validate the robustness and accuracy of the proposed approach, establishing its effectiveness in recovering missing boundary information for fourth-order elliptic models.
Atomic and molecular physics
045401
Ramzan Ullah, Muhammad Aamir, Mudssir Shezad and Safiqul Islam
Sorafenib Tosylate (ST), a kinase inhibitor, is an anti-cancer agent that prevents abnormal proteins from signaling cancer cells to proliferate. Novel Fourier Transform Infra-Red (FTIR) and Raman spectroscopies, covering 200–4000 cm−1, were analyzed to understand the dynamics of this molecule. Numerous peaks in the FTIR and Raman spectra were assigned based on Density Functional Theory (DFT) calculations with three types of basis sets: 3–21G, 6−31G(d), and 6−31+G(d,p). The scale factor of 0.94955, closest to the ideal value of 1.0 for 3–21G, was determined by excluding intramolecular hydrogen-bond frequencies from our limited dataset. We accurately assigned the IR and Raman bands to the ST molecule by corroborating the recorded spectra with calculated DFT spectra. The findings of this study can provide valuable insights into current research on cancer treatment with kinase inhibitors.
045402
R L Melingui Melono, P Doba, A Negoukoumé Abdoulaï, M G Ndewelem, O Holtomo and O Motapon
This work presents a theoretical study of energy levels, binding energies, and dipole polarizabilities of a negatively charged donor (D−) in CdSe/ZnTe and ZnTe/CdSe core/shell spherical quantum dots (CSQDs) embedded in silica. Calculations are performed within the framework of effective mass approximation using a configuration interaction method with B-spline basis functions. The dielectric constant, effective mass, and confinement potential are modeled using a Woods-Saxon shape to reflect realistic material interfaces. For CdSe/ZnTe CSQDs, both the binding energy and static dipole polarizability (SDP) show non-monotonic behavior as the core-to-shell ratio (Rc/Rs) increases, indicating a transition in impurity localization. In ZnTe/CdSe, the trend is reversed. The dynamic dipole polarizability (DDP) reveals resonance peaks whose redshift with size suggests strong tunability of the optical response. The results highlight the sensitivity of electronic and optical properties to the geometrical and material parameters of the CSQD, offering insights for the design of tunable optoelectronic devices.
Electromagnetism, optics and photonics
045501
Wei Zhu, Weichen Geng and Lijun Guo
This paper presents a non-volatile optical switch and switch array based on the hybrid integration of silicon waveguides and Ge-Sb-Se-Te (GSST) phase-change material. First, a 2 × 2 optical switch unit is designed by integrating GSST with silicon waveguides, enabling optical path switching by controlling the crystalline/amorphous phase transition of GSST. This switch unit exhibits non-volatile memory characteristics, maintaining its state without a continuous bias voltage, which significantly reduces power consumption and minimizes the footprint on the chip. On this basis, an 8 × 8 and a 16 × 16 optical switching network are constructed by cascading the 2 × 2 switch units according to an optical network topology. Systematic simulation and optimization of the designed 2 × 2 optical switch and array structure show that for the 2 × 2 unit, the insertion loss is 0.098 dB with crosstalk of −15.62 dB in the amorphous state, and 0.047 dB with crosstalk of −10.95 dB in the crystalline state. The expanded 8 × 8 Benes optical switching network maintains good performance, with a total insertion loss of 17 dB in the All-Cross state and 30 dB in the All-Bar state. For the 16 × 16 optical switching network, the total insertion loss is 37.61 dB in the All-Cross state. The proposed low-loss, high-performance optical switch architecture offers an effective solution for realizing large-scale photonic integrated switching networks.
045502
Ning-Ning Wang, De-Wei Zhang, Yi Zhang, Xian Wang, Qing Liu and Qi-Kun Liu
This work proposes a novel design for realizing a dual-band wide-angle frequency beam scanning antenna based on spoof surface plasmon polaritons (SSPP). The proposed antenna achieves independent wide-angle beam scanning across dual frequency bands by simultaneously controlling electromagnetic wave radiation in the fast- and slow-wave regions. A glide-symmetric SSPP transmission line is designed to enable high-frequency radiation without additional structures. Furthermore, by loading shunt-connected periodic rectangular metallic patches along the SSPP transmission line, the low-frequency SSPP waves in the slow-wave region are perturbed, thereby generating a second radiation band. Unlike previous designs, this work demonstrates negligible open stopband effects in both operational bands through simulation. A prototype was manufactured and experimentally evaluated, demonstrating good consistency between experimental data and simulated results. The antenna achieves wide scanning angles of 104° (4.2–8.2 GHz) and 93° (10.5–29 GHz), offering a promising solution for multi-function wireless communication systems such as intelligent transportation.
045503
Xinrui Chen, Huili Fan and Huibo Fan
In this paper, we propose and theoretically analyze an ultra-compact microstructured fiber (MSF) sensor for multiparameter sensing. The MSF is based on a photonic crystal fiber (PCF) with four air holes, two of which are polished to form open semicircular holes. Silver film can be easily coated on the surface of these semicircular holes to excite surface plasmon resonance (SPR). Polydimethylsiloxane (PDMS) is deposited in one semicircular hole, while the other semicircular hole directly interacts with the surrounding environment. Owing to the flexible fiber structure, the effective refractive index (RI) of core mode can be readily tuned to match RIs of the plasmonic modes around the metal films. Phase matching induces two hybrid plasmonic modes that distribute both in the MSF core region and the two semicircular holes. The hybrid mode in PDMS region exclusively responds to temperature variations, exhibiting a sensitivity of −3.2 nm/°C over the range of 30 °C to 60 °C. In contrast, the hybrid mode in the other semicircular hole only responds to RI change, with a sensitivity of 2312 nm RIU−1 in the RI range of 1.30 to 1.33. Furthermore, by polishing a third air hole into open semicircular hole and coating it with magnetic fluid (MF), three environmental parameters—temperature, RI and magnetic field (with a sensitivity of 0.78 nm mT−1 over 10 mT to 40 mT)—can be measured simultaneously.
045504
Hamza Ahmad, Mohd Haizal Jamaluddin, Fauziahanim Che Seman and Hasan Ahmed Hasan Mohammed
A compact dual-port Dielectric Resonator Antenna designed for 5G millimeter-wave bands is proposed. The antenna employs a single rectangular DRA with two orthogonal feeding ports to achieve polarization diversity and minimize port-to-port coupling. A central notch is incorporated within the resonator to achieve dual-wide impedance bandwidth. The gain of the DRA is enhanced by increasing the profile to excite it in higher order modes. To further improve isolation between the orthogonal ports, a corner-placed defected ground slot is incorporated in combination with metallic strips attached to the resonator sidewalls. Unlike conventional dual-port DRAs, the proposed configuration incorporates orthogonal aperture coupling, a central notch, and a combination of isolation techniques to achieve the desired performance. The proposed antenna covers the dual bands of 24.45–30.23 GHz (21.1%) and 32.25–41.17 GHz (24.3%). It demonstrates an inter-port isolation exceeding 40 dB, peak realized gain higher than 7 dB, and maintains radiation efficiency above 93%, all within a compact footprint of 1.75λo × 1.75λo × 0.49λo. Owing to its compactness, dual-wideband capability, strong isolation, and efficient radiation, the proposed antenna offers a promising solution for fifth-generation mm-wave communication systems.
045505
Xiao-Dong Li, Lulu Li, Wenbo Cheng, Nan Ding and Liangliang Liu
Solar-blind photodetectors (SBPDs) play a critical role in missile detection and secure communication. Compared to conventional crystalline materials, SBPDs based on amorphous GaOx (a-GaOx) show satisfactory low cost and excellent stability. However, some basic issues have not been studied yet, such as why the SBPD based on Ga-rich a-GaOx has higher detectivity and why the nitrogen (N) annealing process could lower its dark current. The underlying defect and doping mechanism are not readily clarified by direct experimental observations, which hinders the further design of a-GaOx based SBPD. This work reveals the defect and doping mechanism in a-GaOx at the atomic scale by first-principles calculations. It is found that the stoichiometric and Ga-poor/O-rich a-GaOx tend to have a wide gap owing to the dative bonds formed by non-equivalent sp3-hybridized Ga orbitals and the lone-pair electrons of O. While for the Ga-rich a-GaOx, the Ga–Ga bonds formed by redundant Ga-atoms could introduce gap states and reduce the mid-gap, leading to a high response current and speed in Ga-rich GaOx based SBPDs. Besides, doping analyses reveal that the nitrogen atoms introduced by the annealing process in the Ga-rich sample should bond with oxygen atoms to reduce the band tail states, thereby decreasing the dark currents in Ga-rich GaOx. Finally, the presented atomic and electronic pictures further provide innovative theoretical insights for designing sensitive a-GaOx SBPDs with high detectivity.
045506
Yanpeng Zhang, Xuehong Sun, Liping Liu, Guoche Qin, Hongshun Liu and Xiaangguo Li
The terahertz (THz) spectral range holds substantial promise for applications in imaging, sensing, and communications; however, the development of high-efficiency broadband THz absorbers remains a formidable challenge. This work demonstrates a dynamically tunable ultra-broadband metamaterial absorber (MMA) that incorporates a Au-MF2-VO2 Fabry-Perot (F-P) cavity coupled with graphene surface plasmon resonance, enabling multi-mode operational capabilities. By dynamically regulating the electrical conductivity of VO2 (to achieve its metal-insulator phase transition) and the Fermi level of graphene (0.25–1.0 eV), the system transitions between three distinct modes: an ultra-wideband mode (1.14–8.78 THz, with a relative bandwidth (RBW) of 154%), and two narrowband modes (1.15–2.08 THz and 4.03–6.00 THz, respectively). Under 60∘ oblique incidence, the absorber retains an RBW of 92.8% for transverse electric (TE) polarization and 61.9% for transverse magnetic (TM) polarization, thereby exhibiting excellent polarization insensitivity and angular stability.
045507
Jyoti Bikash Mohapatra and Naveen K Nishchal
Optical correlators often struggle to identify objects in noisy environments, limiting their efficacy in real-world applications. Optical pattern recognition can be seriously hampered by severely reduced visibility and contrast deterioration, which compromises its reliability and often leads to failure in identifying objects in the query scene. To the best of our knowledge, adaptive optical recognition systems have yet to achieve consistent reliability in highly noisy real-world environments. In this study, we propose an advanced non-linear fringe-adjusted joint transform correlator designed to achieve robust resilience against various noise perturbations, including scene noise, hazy inputs, target occlusion, and atmospheric turbulence. The central order self-intensity terms in the conventional joint transform correlator (JTC) operation are significantly stronger than the conjugate products and consume most of the energy in the correlation outputs. Here, we present a simple yet effective zero-order elimination technique combined with wavelet processing, which significantly enhances correlation performance, improves peak detection, and increases stability against noise perturbations. The target-tracking capability of the proposed scheme in the presence of strong background noise has been demonstrated through numerical simulations. Additionally, we demonstrate the hybrid experimental realization of the modified non-linear fringe-adjusted JTC incorporated with chirp-encoding, which we believe provides a new perspective to the field. The proposed approach bridges the gap between numerical simulations and optical implementations, offering a robust and efficient solution for object recognition in challenging environments. Comparative analyses with the previously reported methods demonstrate the efficacy of the proposed algorithm, establishing its potential for real-time applications in optical pattern recognition and image processing.
045508
A O Kamenev, A A Malinchenko, I M Efimov and A H Gevorgyan
One-dimensional (1D) photonic crystals (PCs) with two defect layers (DLs) have unique properties of localization of light and multimode low-threshold laser generation, they can also be used as highly sensitive optical sensors. This study investigates the distribution of light in 1D PCs with two DLs at the exceptional points of degeneracy, where defect modes (DMs) merge in the reflection spectrum. The four most significant types of symmetry in such structures are considered, and an unusual distribution of the field at DMs in the PC structure with different symmetry properties around the first and second DLs is shown. Unlike previous works, we demonstrate for the first time four important methods for achieving merging of DMs in 1D PCs with two DLs: merging due to changes in the symmetry of the PC, merging with an increase in the number of unit cells in the middle, merging by altering the thickness of the defects in the PC, and merging by varying the angle and polarization type of the incident light. Additionally, the transmission of light through the 1D PC with two DLs is investigated for the first time under varying angles and types of polarization of incident light. The novelty of this work also lies in the fact that we show the possibility of changing the number of DMs within the photonic bandgaps depending on the s- or p-waves (TE and TM polarizations) incident on the structure at large angles. Such versatility can be further used for the development of tunable optical sensors, filters, and other devices, based on the PCs.
045509
Guilherme Aparecido da Silva Felício, Ariosvaldo Junior Sousa Silva, Romildo Jerônimo Ramos, Silésia de Fátima Curcino da Silva and Eralci Moreira Therézio
A quantitative analysis of the substrate influence on the degradation process induced by exposure to heat and humidity, and its effect on the optoelectronic properties of multication hybrid perovskite thin films (FAyCs1-yPb(IxBr1-x)3), was carried out using traditional spectroscopic techniques such as UV–vis optical absorption and photoluminescence (PL), along with x-ray diffraction (XRD) to investigate the structural characteristics of the samples. The films were deposited onto FTO and PEDOT:PSS substrates via the spin-coating technique for two different cesium and bromine concentration ratios: 17%/17% and 17%/38%, respectively. During the degradation process, the perovskite film undergoes phase segregation, leading to a cation-rich zone formed by the combination of multiple halides. The presence of hexagonal perovskite phases was observed, attributed to the crystallization process. The results demonstrate a correlation between the degradation rate of the films and the morphological roughness of the substrates, with films deposited on FTO substrates degrading more slowly than those on PEDOT:PSS. A decrease in the maximum absorption values was observed as a function of material degradation. Moreover, the sample with the higher bromine content exhibited a blueshift in the onset of the absorption spectrum, consequently increasing the optical bandgap of the film. In the photoluminescence spectra, we observed a decay in the emission intensity and a shift in the emission peak position of the films due to halide segregation. This work provides insights into the degradation mechanisms of hybrid perovskites, with particular emphasis on the substrate effect and its impact on the emission properties of these materials.
045510
Yijia Zhao, Yuxin Wang, Jinping Tian and Rongcao Yang
This work presents a scheme for realizing versatile and customizable terahertz imaging using polarization-multiplexed Janus coding Metasurfaces. Building on a reflective meta-atom enabling asymmetric intensity-modulated focal spots and tailorable imaging under linearly polarized (LP) waves incidence, we develop a Janus meta-atom to facilitate the unique asymmetric and reciprocal transmission. As proofs of concept, two Janus coding metasurfaces are constructed to achieve customizable holographic patterns and focal spots, which can produce spatially complementary holographic patterns and position-shifted focus for oppositely incident LP waves. This work demonstrates bidirectional polarization-multiplexing wavefront reconfiguration capabilities, offering promising approaches toward compact and customizable terahertz-integrated devices.
045511
Pallavi Pant and Neelam Srivastava
Spectrum sensing (SS) plays a crucial role in cognitive radio (CR) networks, identifying unused primary user (PU) spectrum for efficient utilisation. SS is measured using sensing parameters, including the probability of detection (Pd), the probability of false alarm (Pf), and the probability of missed detection (Pmd). The IEEE 802.22 standard is a CR standard designed to enable opportunistic access to unused licensed TV spectrum. According to the standard, the probability of false alarm should be ≤0.1, and the probability of detection should be ≥ 0.9. The probabilities of detection and false alarm are strongly influenced by the threshold value, and the selection of the threshold plays a crucial role in identifying the presence or absence of the PU. In the proposed method, a deep learning (DL)-based adaptive threshold selection approach is employed for energy detection (ED) in CR networks, using the Bidirectional long short-term memory (BiLSTM) model to achieve Pd = 1 and Pf = 0. In many available SS approaches, the threshold is determined by fixing Pd or Pf and optimising the other detection parameter. In the present study, we have considered the optimal threshold at low signal-to-noise ratio (SNR) using BiLSTM, which achieves better sensing performance compared to traditional methods. The proposed framework determines an adaptive threshold for low SNR (−30 dB to −8 dB) and demonstrates notable improvements in throughput (up to 65%) and energy efficiency (up to 70%) compared to traditional threshold-based methods.
045512
Ran Wang, Hongyang Li, Shentao Zeng, Hong Li, Ruiling Xie, Cui Luo and Ying Liu
Four sets of FeCo binary alloy magnetic particles were prepared with liquid phase reduction, and the impact of changes in Fe:Co element content on the microstructure and electromagnetic absorption properties were discussed. The results showed that with an increase in Fe content, the particle size decreased and crystallinity increased. The real and imaginary parts of the complex permittivity of the samples were stable at low frequencies (2–10GHz) but resonances at high frequencies (10–18GHz), demonstrating good dielectric loss capability at specific microwave frequencies. As frequency increased, the real part of the complex magnetic permeability of some samples were stable at low frequencies but fluctuated at high frequencies, while the real part of the permeability of some samples decreased gradually. When the Co content exceeded that of Fe, the imaginary part of the permeability exhibited peaks with high frequencies. As frequency increased, some samples displayed the characteristics of eddy current loss while the other samples exhibited characteristics of exchange resonance. Also polarization relaxation loss was observed. The sample Fe:Co ratio of 4:6 presented the best reflectivity loss of −9.98 dB at frequency of 14 GHz with a sample thickness of 2.6 mm.
045513
Lekshmi Eswaramoorthy, Parul Sharma, Brijesh Kumar, Abhay Anand V S, Anuj Kumar Singh, Kishor Kumar Mandal, Sudha Mokkapati and Anshuman Kumar
Whispering gallery mode (WGM) microdisk resonators are promising optical devices that confine light efficiently and enable enhanced nonlinear optical effects. This work presents a novel approach to reduce sidewall roughness in SiO2 microdisk resonators using focused ion beam (FIB) polishing. The microdisks, with varying diameter ranging from 5 to 20 μm are fabricated using a multi-step fabrication scheme. However, the etching process introduces significant sidewall roughness, which increases with decreasing microdisk radius, degrading the resonators’ quality. To address this issue, a FIB system is employed to polish the sidewalls, using optimized process parameters to minimize Ga ion implantation. White light interferometry measurements reveal a significant reduction in surface roughness from 20 nm to 7 nm for a 5 μm diameter microdisk, leading to a substantial enhancement in the scattering quality factor (Qss) from 3 × 102 to 2 × 106. These findings demonstrate the effectiveness of FIB polishing in improving the quality of microdisk resonators and open up new possibilities for the fabrication of advanced photonic devices.
Plasma physics and fusion
045601
Wail Seif Eddine Namous, Salah Sahli, Lyes Benterrouche and Houssem Eddine Bousba
Atmospheric pressure multi-jet plasma devices have long been considered a promising solution for achieving homogeneous and repetitive surface treatments over large areas. Understanding and addressing the interacting jet’s unique behavior is crucial to reach this goal. This paper contributes to this understanding by presenting a helium-fed, alternating current (AC) powered plasma devices: a honeycomb structure featuring six tubes angled toward a central tube, and a triangular structure consisting of three tubes angled toward each other. These devices were tested, along with derivative models. The study examined the characteristics of the resulting plasma jets, focusing on their dependence on the operational settings, the electrodes configuration, the angle of the tubes relative to the electrodes, and the spatial orientation of the devices. Measurements of the plasma jet length were also conducted under various operating conditions. The results show that the proposed designs delivered longer plasma plumes, as a function of gas flow per tube, compared to the reference single-jet. The collection of jets remained closely packed, avoiding both divergence and coupling, with very little dependence on higher flow rates.
Condensed matter and materials physics
045901
Kheder Suleiman, Yongge Li and Yong Xu
Active baths—ensembles of self-propelled entities such as bacteria, algae, or synthetic colloids—constitute a broad class of non-equilibrium systems capable of generating transport phenomena far beyond classical Brownian motion. Such environments are ubiquitous in biology—for instance, in intracellular cargo transport where passive tracers like vesicles navigate crowded cellular media agitated by molecular motors—and hold promise for engineering applications, such as targeted drug delivery in microfluidics or tunable rheology in active materials. Understanding how passive tracers move in these complex environments, particularly in the presence of transient interactions and structural disorder, is therefore essential for connecting microscopic activity to macroscopic transport properties, yet remains unexplored in models incorporating dynamic coupling. Here, we numerically investigate the transport properties of a passive tracer in a two-dimensional active bath composed of Active Ornstein-Uhlenbeck Particles (AOUPs), incorporating immobile obstacles and a novel transient harmonic coupling mechanism activated when the tracer-AOUP distance falls below a threshold TH. To this end, we analyze the mean squared displacement (MSD), time-dependent diffusivity, and probability density function (PDF) of the tracer’s displacement, exploring dependencies on parameters such as active particle density (θac), spring stiffness (k), persistence time (τ), active noise strength (Dac), and TH. Our findings reveal that, in obstacle-free environments, increasing tracer-active coupling and system size can give rise to enhanced diffusion and transient superdiffusive regimes driven by intermittent, collective tracer-active rearrangements. In contrast, the presence of immobile obstacles fundamentally alters this behavior, suppressing intermediate long-range transport and ultimately inducing subdiffusive or confined dynamics. Displacement PDFs exhibit persistent non-Gaussian features and approach stationary, bounded forms rather than converging to Gaussian statistics, reflecting nonequilibrium steady states shaped by active forcing, interaction-induced localization, and confinement. Together, these findings elucidate how dynamic coupling and environmental disorder jointly regulate nonequilibrium transport, with direct implications for intracellular dynamics and the design of synthetic active systems.
045902
Wei Zhang, Hanshuo Ding, Minli Zheng and Bowei Hua
This paper proposes a drag model and a numerical simulation model of turbulent boundary layers , focusing on a single surface topography unit designed for flow control and drag reduction. Using the shape and depth of the topographic unit as variables, the flow characteristics around the unit at different flow velocities are analyzed. By examining flow-field parameters such as total pressure loss and turbulent kinetic energy variation, the effect of the unit’s placement on a blade structure on boundary-layer loss characteristics is investigated. Furthermore, by varying the spanwise and streamwise spacing of the topographic units on the blade surface, the influence of their arrangement on aerodynamic parameters—including the axial distribution of blade loss and the total pressure loss at the outlet section—is studied. The results show that the flow state within the turbulent boundary layer is directly affected by the milling parameters. A quadrilateral topographic unit with a depth of h = 0.2 mm delivers the best drag reduction performance, with a maximum drag reduction rate of 7.9%. Arranging units with a spanwise spacing of 1.2 mm over the range of 0% to 25% of the axial chord length on the blade suction side minimizes the blade capacity loss and achieves the optimal drag reduction effect.
045903
Daoguang Liu, Xiang Lin, Hui Liu, Jiyu Dong and Xiufang An
The detection and treatment of harmful gases generated during industrial production processes are of paramount importance. Therefore, this study systematically investigates the adsorption behavior of harmful gases (HF, NO, NO2, SO2) on both the pristine CrS2 monolayer and the Cu3 cluster-decorated CrS2 (Cu3-CrS2) monolayer using density functional theory (DFT). The results indicate that the adsorption energies of the four gases on the pristine CrS2 monolayer are all greater than −0.2 eV, indicating weak gas-substrate interactions that are inadequate to elicit detectable changes in electrical resistivity, rendering it unsuitable as an adsorbent or scavenger for these gases. In contrast, the Cu3-CrS2 monolayer exhibits significantly superior gas adsorption performance. Specifically, its adsorption energies for NO, NO2, and SO2 are all below −1 eV. A pronounced interfacial charge transfer (>0.3 |e|) together with distinct hybridization between the gas molecular orbitals and Cu-3d orbitals synergistically strengthens the interaction between the adsorbates and the Cu3-CrS2 monolayer. Furthermore, considering the recovery time after gas adsorption, the Cu3-CrS2 monolayer shows potential as a sensor for HF and SO2 gases, while it can also function as an effective scavenger material for NO and NO2 gases. These findings confirm the prominent application potential of the Cu3-CrS2 monolayer in the detection and removal of gases, providing a theoretical foundation for the development of novel gas sensors.
045904
Xing-Lin Gao, Yao-hui Liu, Ren-Sheng Li, Yu Bai, Cai-Yun Wang and Zhen-Lu Wang
A three-dimensional (3D) phononic crystal (PnC) with a rotatable defect angle is designed, which possesses a low-frequency bandgap and can erect a 3D waveguide. The band structure and transmission loss of the two-component and three-component PnC are calculated using the finite element method, and the bandgap characteristics of the two-component PnC with and without defects are analyzed, as well as the impact of different defect angles. Furthermore, two kinds of two-dimensional planar waveguide paths with a right angle and Zigzag are constructed, and the propagation characteristics of PnCs with different defect angles are computed. Meanwhile, a 3D right angle waveguide path with a 45° two-component defect PnC is established to analyze the propagation characteristics. Finally, elastic waves of different frequencies are stopped from propagating in different spatial locations on the supercell structure by introducing a gradient defect surface spacing, thus realizing subwavelength rainbow trapping. The results indicate that 3D PnCs with defects can generate multiple dispersion curves within the first bandgap range, which allows for the realization of planar and 3D right angle waveguides. This work offers a new insight into the design of 3D elastic waveguides and multilayer waveguides.
045905
Somesh Chandra, Gurpreet Kaur, Aiswarya S M and G M Bhalerao
The thermal properties of ternary MgCu2O3 compound have been investigated using density functional theory (DFT) in conjunction with density functional perturbation theory (DFPT) and quasi-harmonic approximation (QHA). The phonon band structure and phonon density of states (PhDOS) are calculated to establish the lattice dynamical stability and vibrational characteristics of the compound. Based on the phonon spectra, the temperature-dependent thermodynamic quantities, including the thermal expansion coefficient, heat capacities at constant pressure and constant volume, entropy, and isothermal bulk modulus, are evaluated. The results provide comprehensive insight into the vibrational and thermodynamic behaviour of MgCu2O3, highlighting the crucial role of lattice dynamics in governing its thermal properties.
045906
Sagi Chen and Moti Margalit
Active modulated ultrasound technology seeks to replace conventional drivers in earphones and other acoustic systems, offering new methods to overcome the physical limitations of traditional transducers without compromising audio quality. Among the various implementations, the vertical and horizontal membrane configurations are the two primary architectures for integrating modulated ultrasound into speakers. Building on recent analytical advancements in modelling active ultrasound modulation for audio applications, we analyze the structural differences, operating principles, and performance characteristics of these two designs. Our results show that while both configurations rely on the same fundamental modulation mechanism, the horizontal membrane architecture offers a simpler implementation but is less efficient in terms of power consumption and acoustic output compared to the vertical configuration. The comparative analysis presented in this paper lays the groundwork for optimizing the design of next-generation modulated ultrasound speakers.
045907
Wei Zhang, Weichang Wu, Chuanniu Yuan, Chenkang Lin, Xu Gong, Bozhan Hai and Rongxin Chen
This study addresses the underexplored evolution of the key arch bridge structures that affect powder compaction. A coupled qualitative and quantitative analysis of densification and deformation is conducted through 2D MPFEM simulations of uniaxially compressed pure iron powders with sphere, hexagon, and strip shapes. Results showed that powder densification was mainly divided into three stages: rapid consolidation (≤40 MPa), plastic deformation (40–460 MPa), and decelerated densification (460–600 MPa). The strip powder with a smaller aspect ratio achieved superior densification, evidenced by the highest relative density and coordination number evolution, along with the lowest final equivalent plastic strain (0.0943) among the morphologies studied. As the compaction pressure increased, the arch bridge structure initially increased and then fluctuated showed a fluctuating trend overall. The strength rose sharply initially before its growth rate diminished beyond 100 MPa. The bending angle transitioned from an upward trend to a fluctuating downward trend, and the direction angle of the arch bridge structure fluctuated around
. In addition, the strength of the sphere arch bridge structure was high, and the directional angle of the strip arch bridge structure was small. In summary, strip powder with a low aspect ratio offers notable benefits in enhancing compaction uniformity, lowering plastic strain, and alleviating arch bridge effects, thus furnishing valuable guidance for optimizing high-performance powder compaction processes.
045908
I V Martirosian, D A Aleksandrov, A S Starikovskii, M A Osipov and S V Pokrovskii
This paper presents the results of experimental and numerical studies of the levitation characteristics of a HTS suspension consisting of a composite HTS tapes stack based on the YBa2Cu3O7-x compound and an array of cylindrical NdFeB permanent magnets. In particular, the magneto-force characteristics (rigidity and levitation force) of the system cooled by liquid nitrogen under field-cooling (FC) conditions have been considered. For different cooling heights, load characteristics have been obtained for both vertical and lateral displacements of the HTS element relative to the magnets, and the dynamics of changes in the rigidity of the levitation system have been considered. The key result of the study is the identification of a tendency towards a decrease in the maximum repulsive vertical force and a simultaneous increase in the maximum guidance restoring force as the cooling height of the HTS tapes stack decreases.
045909
Bindiya Patel, Nikita Thakkar and Abhijit Ray
Graphitic carbon nitride (g-C3N4) is a visible-light-active, metal-free semiconductor well-known for its stability, low cost, and suitable band gap for photocatalytic applications. Herein, bulk g-C3N4 is synthesized via the thermal vapour condensation method by systematically varying temperature and duration, resulting in a structural modulation. X-ray diffraction reveals that a higher pyrolysis temperature of precursor melamine beyond 550 °C improves the crystallinity of g-C3N4, whereas prolonged heating at 550 °C reduces it. The UV–Vis and photoluminescence spectroscopies indicate that the reduced crystallinity and increased defect density enhance its visible light absorption and charge separation. Among the samples, g-C3N4 synthesized at 550 °C for 6 h shows the best performance, achieving 99% methylene blue degradation within 90 min in a first-order kinetics. This superior activity is attributed to its partially amorphous nature, lower conduction band edge, and higher density of defect sites. The structural modulation of its effective bandgap shows a bowing behaviour as corroborated by empirical law as well as density functional theory-based estimations.
045910
Yuebing Li, Jinxiang Fang, Haotian He, Haojie Jin, Zelin Jiang, Tong Sun, Jingtao Wei, Yang Zhao and Xiaoming Wang
Existing flexible metamaterial absorbers (MAs) often suffer from drawbacks such as complex overall structures, high fabrication cost, large thickness, and narrow absorption bandwidth. To address these issues, a well-balanced flexible metamaterial absorber is designed, fabricated, and tested in this work. The proposed absorber consists of a periodic array of circular resistive films as the top resonant layer, a flexible polyvinyl chloride (PVC) slab as the intermediate dielectric layer, and a copper ground plane as the bottom layer. The structure is simple and is fabricated by a low-cost screen-printing process. The absorber exhibits an absorption higher than 90% in the 7.52–25 GHz frequency range with an overall thickness of 2.5 mm. Compared with some previously reported absorbers with complex geometries, the proposed design achieves a wider absorption bandwidth and a thinner profile; compared with other absorbers employing similarly simple patterns, it offers a lower operating frequency band together with a reduced thickness. For both TE and TM polarizations, the absorption remains above 80% as the incidence angle varies from 0° to 60°, indicating good angular stability and polarization insensitivity. Experimental measurements are in good agreement with the simulations, confirming the reliability of the numerical results. The present design provides a useful reference for the design and fabrication of high-performance flexible metamaterial absorbers.
045911
Aiswarya T, Kalpana Devi P and K K Singh
Targeted delivery of anticancer pharmacological agents significantly reduces adverse secondary effects and allows for localized release of therapeutics in proximity to neoplastic cells. Density Functional Theory (DFT) computations were utilized to explore both pristine and transition metal (Co, Cu, Fe, Ni, and Au) doped boron nitride nanosheets (BNNSs) as prospective nanocarriers for the anticancer pharmaceutical melphalan (Mln). The computed adsorption energies span from −0.32 to −0.89 eV for pristine, Co-, Ni-, and Au-doped BNNSs, signifying physisorption primarily governed by weak interactions, whereas more substantial binding energies of −1.21 and −1.22 eV are recorded for Cu- and Fe-doped BNNSs, corroborating a chemisorptive mechanism. All adsorption phenomena are exothermic and thermodynamically advantageous. The charge transfer from the BNNS surface to Mln fluctuates between 0.02 and 0.23 |e|, accompanied by significant alterations in the HOMO–LUMO gap, particularly within the Au- and Fe-doped configurations. Ni-, Co-, and Au-doped BNNSs display moderate adsorption intensity and reduced estimated recovery durations, indicating expedited drug release, whereas Fe-doped BNNSs demonstrate enhanced binding appropriate for regulated drug retention. These findings elucidate that transition metal doping facilitates adjustable interaction strength within BNNS-based drug delivery systems. Collectively, this theoretical investigation underscores the potential of TM-doped BNNSs as effective nanocarriers for Melphalan, proposing pH-responsive release and recovery duration as innovative design parameters for the future development of anticancer drug delivery systems.
045912
Ram Babu Ray, Gopi Chandra Kaphle, Dinesh Kumar Yadav, Hari Paudyal and Durga Paudyal
We report an ab initio study of electronic, magnetic, strain induced meta-magnetic, and optical behaviors of LiMgPdSn-type new quaternary Heusler alloys ZrRuTiIn and ZrRuTiGa. The negative values of cohesive and formation energies along with favorable elastic constants confirm their chemical, structural, and mechanical stability. Total energy calculations show ferromagnetic ground state exhibiting a half-metallic gap and satisfying the Slater-Pauling 18 electron rule. Applied uniform strain strengthens, reduces, and destroys half-metallicity, and tunes the ferromagnetic to paramagnetic transition within LiMgPdSn-type structure. Interestingly, tetragonally distorted ZrRuTiIn and ZrRuTiGa with constant volume produce strain induced meta-magnetism. In addition, we investigate optical properties such as dielectric function, conductivity, reflectivity, refraction, extinction coefficient, energy loss, and absorption coefficient, which generally play an important role in optoelectronic functionalities.
045913
Jianfei Wang, Zhiqiang Li, Liang Ma, Yicheng Wang, Xing Xu and Yipeng Zhao
Interfacial charge redistribution and strain modulation are crucial for tailoring the electronic structure and optoelectronic properties of two-dimensional van der Waals heterostructures. In this work, first-principles calculations are employed to investigate the interface- and strain-dependent electronic and optical properties of NbSiN3/NbGeN3 heterostructure. The structural stability of various stacking configurations is confirmed through cohesive energy and phonon dispersion analyses, while electrostatic potential profiles reveal the interfacial polarization direction. The Ge/Nb, Ge/Si, and Nb/Si stacking configurations exhibit type-II band alignment, which promotes efficient spatial separation of photoexcited carriers. Especially, the Ge/Si configuration shows exceptionally high hole mobility, reaching 11318 cm2·V−1·s−1 along the x direction and 7297 cm2·V−1·s−1 along the y direction. Furthermore, biaxial tensile strain effectively tunes the band edges and enhances the photovoltaic response, achieving a maximum theoretical power conversion efficiency of approximately 21.9%. These findings provide physical insight into interface and strain engineered band alignment and offer guidance for designing high-performance optoelectronic nanodevices.
045914
Zhongwei Zhang
The mechanical response of TODD-graphene nanotubes (TODD-GNTs), a newly proposed graphene allotrope, is examined through non-equilibrium molecular dynamics (NEMD) simulations with the AIREBO-M potential. Unlike CNTs with uniform hexagonal lattices, TODD-GNTs feature a porous framework of 3-, 8-, 10-, and 12-membered rings that generate heterogeneous stress distributions and ring-specific deformation. Key properties—Young’s modulus, ultimate strength, rupture strain, and toughness—are analyzed under variations in tube length, radius, temperature, vacancy concentration, and wall number. The results indicate that increasing radius improves strength and toughness, while higher temperatures and vacancies cause significant degradation. Length and wall number have milder negative effects. Stress is localized at the small triangular rings, which act as brittle failure sites, whereas larger rings accommodate strain through angular distortions. This combination produces an anisotropic and hierarchical deformation mechanism, in which different structural motifs contribute distinctly to the overall mechanical response.
045915
Dian-Cheng Zhang and Shi-Jie Yang
We investigate the extended Bose–Hubbard model of two bosonic components, on a cubic lattice. Utilizing the dynamical Gutzwiller mean-field theory, we discover the counterflow supersolid state, characterized by the modulated checkerboard order, critically coexisting with a characteristic of the counterflow superfluid. The standard supersolid state of checkerboard order is further identified. And it could be governed by the phase-separation, via an adjustment of the inter-component interaction. Finally, we also chart out the relevant phase diagram.
045916
N Salman Tabrizi and M Yavari
In this study, graphitic carbon nitride (g-C3N4) was synthesized via direct pyrolysis of melamine in air, while a carbon aerogel containing carbon nanotubes (CNTs) was prepared through pyrolysis of a resorcinol–formaldehyde gel under an inert atmosphere. The composite was subsequently fabricated using the impregnation method. The samples were characterized using various techniques, revealing that the composite possesses a porous structure with a high specific surface area of 148 m2 g−1 and a total pore volume of 0.645 cm3 g−1. The photocatalytic performance of both pristine g-C3N4 and the composite was evaluated for methylene blue (MB) removal under visible-light irradiation. The decolorization process followed a pseudo-second-order kinetic model, with dye removal efficiency increasing at higher solution pH values. While pristine g-C3N4 achieved a removal efficiency of only 13% with an adsorption capacity of 33 mg g−1, the composite exhibited markedly enhanced performance, reaching 86% removal and an adsorption capacity of 106.5 mg g−1 at near-neutral pH. This superior activity is attributed to the composite’s porous architecture, improved light absorption, and more efficient separation of photogenerated charge carriers.
045917
Srinivasan Devadoss, Sandhya Ravichandran and Arnab Ganguly
Artificial magnetic lattices fabricated via nanosphere lithography are gaining attention for their tunable magnetic properties, low cost, and reproducibility compared to conventional nanofabrication methods. This study examines magnetization reversal mechanisms in cobalt nanostructures produced through nanosphere lithography, emphasizing the roles of lattice constant and in-plane magnetic field orientation. Using micromagnetic simulations, the study systematically analyzes how nanosphere diameter (defining lattice constant) and field angle influence hysteretic parameters and switching rate. Results show a distinct transition: smaller lattice constants yield gradual, multi-step reversal, whereas larger lattice constants produce sharper, synchronized switching. Angular dependence further reflects lattice symmetry, with larger lattices exhibiting strong hexagonal-symmetry responses, while smaller ones show reduced sensitivity due to enhanced out-of-plane spin component. The findings distinguish single-mode from multi-mode reversal regimes and provide valuable insights for designing advanced magnetic lattices for memory and spintronic applications.
045918
K Chaibedderraa, H Khalfoun, H Bouhani Benziane and T Hadji
We present a first-principles investigation of the structural and electronic properties of linear carbon chains encapsulated inside a zigzag carbon nanotube (10,0). Using density functional theory as implemented in the SIESTA code, we investigate both single- and double-chain configurations under periodic boundary conditions. Non-covalent functionalization is taken into account through van der Waals interactions.For the single-chain system, confinement inside the nanotube leads to a complete suppression of the bond-length alternation, driving a transition from a polyyne to a cumulene-like structure and inducing metallic behavior. In contrast, the encapsulation of two interacting chains results in an anti-parallel stacking configuration that preserves a finite bond-length alternation (~0.027Å) and opens a narrow indirect band gap of approximately 80 meV. Furthermore, the application of longitudinal mechanical compression progressively reduces the bond-length alternation and triggers a semiconductor-to-metal transition at strain values exceeding −2%. These results demonstrate that interchain coupling and external strain provide effective mechanisms for tuning the electronic properties of one-dimensional carbon-based hybrid nanostructures.
045919
Zhe Wu, Duan Li, Zhaoyu Jiang, Rongrong Chen, Kang Du, Yuan Zhang and Yan Ge
This study investigates the effect of substrate preheating on the residual stress, microstructure, and wear behavior of Tribaloy T400 coatings laser-cladded onto GTD-111 nickel-based superalloy substrates. Coatings were fabricated using a continuous-wave Nd:YAG laser at six preheating conditions ranging from room temperature to 700 °C. The microstructure, phase composition, residual stress, and tribological performance were characterized using SEM/EDS, EBSD, XRD, and pin-on-disk testing. Results indicate that preheating significantly influences coating quality. At 600 °C, a notable reduction in residual tensile stress was observed (∼1600 MPa versus ∼2900 MPa in non-preheated samples), attributed to increased FCC phase content and refined equiaxed grains. The volume fraction of the brittle Laves phase decreased from ∼70% to ∼30%, improving ductility and stress distribution. Wear performance also improved: the coefficient of friction dropped from 0.52 to 0.40, and the specific wear rate decreased by ∼20%. Moreover, preheating enhanced coating–substrate metallurgical bonding by increasing dilution to ∼14.1%, without promoting excessive elemental interdiffusion. In contrast, the non-preheated sample exhibited poor adhesion, severe cracking, and minimal dilution. Overall, substrate preheating was shown to be an effective strategy for tailoring the microstructure and enhancing the mechanical integrity and wear resistance of T400 coatings. Preheating at 600 °C offered the best balance between stress relief, microstructural refinement, and tribological performance, making it a promising condition for industrial applications in gas turbines and high-temperature wear environments.
Machine learning with application to physical science
046001
Weijie Ren, Yao Li, Mingjian Gao and Xiaodong Na
Sea surface temperature (SST) is a key physical variable for characterizing marine environmental conditions. It holds critical scientific significance and application value in marine disaster early warning, global climate change modeling, and fishery resource management. Aiming at the challenges of complex spatiotemporal feature coupling and difficult capture of multiscale variation patterns in SST prediction, this paper proposes a predictive model called STCA-DeFormer (Spatio-Temporal Cross-Attention Decomposition Transformer). The model integrates Seasonal and Trend decomposition using Locally estimated scatterplot smoothing (STL) and a spatio-temporal Transformer with cross-modal cross-attention mechanisms. First, the model decouples the original time series into trend, seasonal, and residual components via STL decomposition. Then, it constructs an enhanced geographic-time encoding module. This module incorporates a 2D convolutional attention mechanism to capture spatial heterogeneity features. Meanwhile, it employs cross-modal cross-attention to model the physical field coupling between SST and auxiliary variables (e.g., sea level pressure, 2-meter air temperature). Finally, a multi-component parallel Transformer architecture is adopted to achieve long-range temporal dependency modeling. Experiments using satellite-derived data over a study area in the South China Sea (SCS) show that the proposed method outperforms the convolutional long short-term memory (ConvLSTM) baseline model and other comparative models. The study demonstrates that the spatiotemporal Transformer architecture effectively improves SST prediction accuracy in complex environments. It provides a new technical pathway for marine disaster early warning and climate modeling.
046002
The following article is Open access
Nail Besli, Nilufer Ercin, Ulkan Celik and Yusuf Tutar
Phytochemicals with dual therapeutic effects particularly those exhibiting both antidiabetic and anticancer activity represent promising candidates for drug repurposing and multi-target drug discovery. We present an AI-assisted pipeline for ranking natural compounds with dual antidiabetic and anticancer potential. The system integrates semantic similarity (S-PubMedBERT), stance detection (BioBERT-NLI), co-occurrence analysis from PubMed and Scopus, and clinical trial profiling. Scores for antidiabetic and anticancer activity were derived as functions of antioxidant and anti-inflammatory relevance common mechanistic intermediates. A hybrid Z-score normalization strategy was used: intra-group baselining for large chemical families (n ≥ 5) and metformin-referenced standardization for smaller groups. Importantly, the system is designed as a literature-driven evidence-synthesis layer—structuring and weighing published experimental and clinical findings—rather than a de novo predictor of bioactivity in the absence of literature support. Quantitatively, the stance classifier achieved [F1 = 0.xx / accuracy = 0.xx] on n = [xxx] manually annotated evidence sentences, and the prioritization recovered [k of m] canonical multifunctional compounds within the top-[K] candidates (precision@K = 0.xx). The pipeline identified lead phytochemicals (e.g., curcumin, resveratrol, quercetin) consistently exceeding Z > 1 across both therapeutic axes. This scalable, literature-driven framework integrates biomedical NLP and weighted evidence to prioritize multifunctional compounds for drug discovery.
046003
Hanmin Fang, Wenlong Huang, Na Wang and Haolong Li
Stiff chemical kinetics plays a crucial role in various disciplines, including atmospheric chemistry, environmental engineering, and combustion science. In this work, we focus on the ROBER problem, a typical stiff system characterized by a set of strongly coupled ordinary differential equations (ODEs). The system’s stiffness arises from the coexistence of ultrafast reactions and slow dynamics, which poses computational challenges to numerical stability and accuracy. Recently, Physics-Informed Neural Networks (PINN), a deep learning based framework, has been widely applied to solve various partial differential equations. However, the standard PINN faces optimization difficulties in multi-scale, strongly nonlinear systems like the ROBER problem. To address this problem, we propose a new strategy called Exact-Constraint PINN (EC-PINN), which integrates conservation law as exact constraint directly into the loss function, enforcing rigorous conservation throughout the training procedure. Based on this framework, we introduce pure exact conservation approaches (with two formulations differing in the treatment of indirect variables) and a hybrid strategy applying soft constraint on the conservation law during the training procedure. Numerical experiments show that the hybrid approach achieves higher accuracy than pure methods and prior soft constraint approach, crucially preserving the conservation law. We also calculate the correlation coefficients among relative error, loss function and its gradient. Analysis reveals a strong correlation between relative error and loss function, validating loss minimization for solving PDEs. In summary, our EC-PINN presents a novel and effective approach for solving stiff chemical kinetics problems, offering improved computational reliability and physical consistency.