Papers
General and interdisciplinary, including biophysics, geophysics and astrophysics
395001
Muhammad Hammad Waheed and Ibrar Hussain
In this work, we analyze Bianchi type VI
and VI
spacetimes by classifying their Noether symmetries derived from the corresponding Lagrangian. For Bianchi type VI
, the number of Noether symmetries ranges from 4 to 7, while the Lie symmetry algebra ranges from 5 to 9. For Bianchi type VI
, the classification yield algebras of dimensions 4, 5, 6, or 9, while Lie symmetries yield 5, 6, 7, 9, or 12 dimensions. We apply positive energy conditions to determine the physical realism of the resulting cosmological models. For Bianchi type VI
, realistic models occur in cases 2a, 2b, 2c, and 3a under specific parameter constraints (e.g.
or
), while cases 3b, 3c, and 4 are unrealistic. For Bianchi type VI
, only cases 2e and 3a are realistic. In all cases, the new models are conformally non-flat. Further, we conclude that none of the newly constructed cosmological models are conformally flat in both the types. The new realistic cosmological cases are physically interpreted and examined using the formalism of
gravity. It is demonstrated that, for the viable scenarios under consideration, the function
admits an explicit power-law representation in terms of the Ricci scalar
, revealing a direct functional dependence on it.
395002
Abdelmalek Boumali
The conventional Dirac oscillator is not Majorana closed at any fixed nonzero frequency. Charge conjugation reverses the sign of the oscillator coupling,
, so a single fixed-frequency sector does not preserve the self-conjugate subspace in one, two, or three spatial dimensions. This mapping follows directly from charge conjugation, but it does not by itself determine which consistency requirement fails, how the obstruction is manifested spectrally, or which oscillator couplings remain admissible. Dynamical preservation of the self-conjugate subspace is the decisive compatibility requirement and is logically independent of both formal reality in a Majorana representation and Hermiticity. Applying these three conditions to candidate oscillator couplings shows that an earlier real-coefficient ‘Majorana oscillator’ prescription fails Hermiticity rather than reality. The spectral manifestation of the obstruction depends qualitatively on dimension: an unpaired level at
in one dimension becomes an infinitely degenerate, orbitally chiral intruder family in two dimensions and the spin–orbit-resolved
,
family in three dimensions. Two admissible alternatives are then examined: a doubled
Hamiltonian with exact particle–hole symmetry and a real Lorentz-scalar confining interaction that preserves Majorana reality without doubling. A linear scalar profile in one dimension yields a normalizable zero mode and
, whereas central scalar confinement in two and three dimensions gives coupled radial equations in which charge conjugation pairs opposite angular channels. We introduce phase-fixed and phase-independent leakage functionals to quantify Majorana-symmetry breaking, thereby converting the compatibility question into an experimentally accessible dynamical test. Together, these results distinguish the standard Dirac oscillator from oscillator constructions that are dynamically compatible with Majorana self-conjugacy.
395003
Soraya Trabelsi, Souhail Souai, Sabrine Garrouri and Ezeddine Sediki
The nonlinear behavior of coupled conduction–radiation heat transfer in participating combustion gases arises from two fundamental sources: the strong temperature dependence of thermal emission, governed by the Stefan–Boltzmann law, and the spectral variation of the radiative properties of real gas mixtures. Accurately capturing these effects remains a major challenge in thermal radiation modeling. In this work, a kinetic-based lattice Boltzmann method (LBM) coupled with an eight-band absorption distribution function (ADF8) is developed to simulate nonlinear radiative–conductive heat transfer in two-dimensional hydrocarbon combustion gases. The proposed LBM-ADF8 framework solves the energy equation and the radiative transfer equation simultaneously using single-relaxation-time model with D2Q9 (two-dimensional lattice with nine discrete velocity directions) and D2Q32 (two-dimensional lattice with 32 discrete velocity directions), LBM schemes respectively. Both formulations are applied to six hydrocarbon combustion reactions, and the predicted temperature fields are compared. To assess the impact of spectral property modeling, the discrepancy between the gray and non-gray formulations is quantified using the normalized root mean squared error (NRMSE) for six hydrocarbon combustion reactions. The maximum NRMSE reaches
, indicating that the gray approximation, while computationally attractive for engineering applications, introduces a measurable loss of accuracy relative to the LBM-ADF8 formulation. The observed differences demonstrate that spectral effects cannot be neglected when predicting temperature fields in participating combustion gases and highlight the balance between computational efficiency and physical fidelity in coupled conduction–radiation simulations.
Quantum optics, processing and information
395101
Nguyen Van Ai, Nguyen Thi Quynh Anh, Ho Hai Quang, Le Quang Trung, Nguyen Huy Bang, Luong Thi Yen Nga, Dinh Xuan Khoa, Do Mai Trang, Le Nguyen Mai Anh, Nguyen Thi Thu Hien et al
Electromagnetically induced transparency (EIT) in five-level atomic systems is theoretically investigated for three representative configurations: M-, inverted-Y, and K-type systems driven by a weak probe field and three control laser fields. The different coupling schemes produce different quantum interference pathways and two-photon resonance conditions, leading to markedly different EIT spectra. The M-type configuration exhibits one, two, and three well-resolved transparency windows as successive control fields are introduced. In contrast, the inverted-Y configuration produces broader transparency windows because of the overlap of multiple interference channels, whereas the K-type configuration exhibits only a single EIT window when all control fields are resonant. Multiple transparency windows in the K-type system appear after introducing appropriate coupling-field detunings. Doppler broadening at room temperature significantly broadens the absorption spectrum and reduces the transparency depth, while preserving the number and positions of the EIT windows. These results demonstrate that the coupling scheme plays an important role in determining the formation and evolution of multi-window EIT spectra and identify the characteristics of the three five-level configurations for multi-channel quantum-optical applications, as well as for the experimental observation of EIT spectra in five-level configurations.
395102
Xiaohui Wang, Zhiang Gao, Chenglong Jiang, Yan Hong, Zewen Jing, Shanman Cheng, Wentao Cao, Liyun Zhuang, Song Yang, Yingxiong Song et al
To improve channel capacity, spectral utilization efficiency and stability of signal transmission, a ring-core photonic crystal fiber with hybrid air holes (RC-PCF-HAH) is proposed. It supports 126 orbital angular momentum (OAM) modes over the 1.5–1.6
wavelength range. The proposed RC-PCF-HAH uses fused silica and SSK2 glass as the substrate and the high-index ring core, respectively. The cross-sectional structural of the designed RC-PCF-HAH incorporates circular, elliptical, and square air holes to simultaneously enhance mode confinement, suppress inter-mode coupling, and reduce transmission loss. Numerical results show that all OAM modes exhibit an effective refractive index difference exceeding
, a mode quality (MQ) higher than 97.7%, and a confinement loss varying between
and
dB m−1. The proposed RC-PCF-HAH achieves a broad effective mode area ranging from 186.36–280.26
, a nonlinear coefficient
below 0.381
, and flat chromatic dispersion lower than 21 ps nm km−1. At 1.55
, the 10 ps walk-off lengths of most modes reach from
to
m. The proposed RC-PCF-HAH achieves a balanced performance in mode capacity, MQ, nonlinear suppression, and dispersion characteristics, showing great potential for high-capacity long-haul optical communications.
395103
Jingming Su, Lihong Rui and Yan Hong
Balancing reconstruction fidelity, transmission efficiency, storage overhead, and encryption security remains challenging in Internet of Medical Things (IoMT) environments. To address this issue, a content-aware ROI/NROI collaborative compression–encryption framework is proposed for secure medical image transmission. Input medical images are first processed using an adaptive ROI-priority localization method based on multiscale structural features and spatial weighting. The detected ROI pixels are preserved without compression and recovered losslessly, whereas the NROI content is compressed in the wavelet domain using blockwise variable-rate compressed sensing with factorized Kronecker-SVD operators. To avoid the explicit construction of large measurement matrices, the Kronecker sensing operation is implemented in factorized form. A domain-separated key-derivation strategy based on SHA-512 digests, a random nonce, and HMAC-SHA-512 is used to control measurement construction, NROI tensor cyclic permutation, ROI/NROI cross-region interleaving, and bidirectional feedback diffusion. Experimental results show that the proposed method provides effective ROI-priority localization, lossless recovery of the detected ROI, high NROI reconstruction quality, and effective ciphertext randomization. The joint ciphertext payload achieves an entropy of 7.9999, near-zero adjacent-element correlations, an NPCR of 99.6095%, and a UACI of 33.4650%. Runtime, storage, and ablation results further characterize the trade-offs among diagnostic preservation, compression efficiency, and encryption security for IoMT-oriented medical image transmission.
395104
Hao Jiang, Zeng-Shuai Li, Dong Yan Lü, Jin-Liang Zhang, Hai-Bo Huang, Xue-Huan Jiang, Kai Chen, Cheng Chen and Yuan Zhou
We propose and analyze an NV-center implementation of a directed cavity-decay scheme for preparing the ground-state entanglement of two nitrogen-vacancy (NV) centers coupled to a single-mode optical cavity. By combining antisymmetric optical driving with a relative phase difference
, microwave-induced population reshuffling within a triplet subspace, and cavity-assisted dissipation, the system is driven toward a singlet-dominated steady state in the ground-state manifold. Starting from the full Lindblad master equation, we construct a reduced four-state effective description that provides a transparent picture of the dominant pumping and leakage processes responsible for the entanglement-preparation mechanism. Based on this reduced model, we obtain analytical expressions for the steady-state fidelity and the effective population-subspace dissipative gap. Within the ideal weak-driving model, the preparation fidelity is mainly limited by the cavity cooperativity
, and in the strong-microwave regime the steady-state infidelity scales as
. In contrast, the convergence speed is governed by the effective population-subspace gap, revealing the distinct physical roles of cavity-assisted pumping and microwave-induced reshuffling. Direct numerical simulations of the full Lindblad dynamics show quantitative agreement with the reduced description in the weak-driving regime. Deviations become visible at
and quantitatively significant by
, where higher-excitation corrections can no longer be neglected. Along the specific control path
, the full dynamics confirm a path-dependent speed–fidelity trade-off: increasing the optical drive accelerates the preparation but lowers the steady-state fidelity. Our results provide a useful route toward preparing entanglement between NV spins in hybrid quantum systems.
Mathematical physics, complex systems and nonlinear dynamics
395201
The following article is Open access
C A Escobar, H Olivares-Pilon and A M Escobar-Ruiz
Degeneracy allows the nodal structure of a quantum state to vary without changing its energy. We study this effect for real superpositions in the fixed-energy shells of the two-dimensional isotropic harmonic oscillator. In Cartesian coordinates
, any such state in the
th shell has the parametrized form
, where
is the non-vanishing ground state and the real coefficients
determine the polynomial factor
. The nodal set is exactly the algebraic curve
. Thus, varying
reshapes this curve at fixed energy. We show that its topology can change only when it develops a finite singular point,
, or when two asymptotic nodal directions merge. We characterize this geometry using three diagnostics: the nodal-domain entropy
, the Cartesian mutual information
, and the entropic uncertainty sum
, which respectively probe probability redistribution among nodal domains, coordinate correlations, and global position–momentum delocalization. The lowest shells reveal a clear hierarchy. For
, mixing only rotates a nodal line. Along a representative
path, a closed conic passes through parallel lines into a hyperbola-type curve;
clearly detects this transition, while
remains smooth. For
, merging asymptotic directions brings smooth cubic branches close together and enhances both
and
. These signatures are accessible in Hermite-Gaussian structured light and nearly isotropic trapped oscillators.
395202
Jirô Akahori, Norio Konno, Yunosuke Mukai, Nino Nagata, Iwao Sato, Ryoichi Suzuki and Yuma Tamura
We study finite-size spectral statistics of the positive new eigenangles of untwisted Grover walks on random lifts of four fixed regular base graphs:
, the Petersen graph, the Frucht graph, and
. The determinant identity of Konno and Sato, the old/new decomposition of graph covers, the covering determinant decomposition, and the Kesten–McKay convergence theorem used here are previously published results. Our contribution is to put these ingredients into an explicit computational framework, document a stable blockwise algorithm for the compressed new sector, correct the finite-size unfolding normalization, and carry out a reproducible comparison across twelve family-size configurations. The study includes a non-vertex-transitive cubic base, a quartic base, and lifts up to sheet number
. Nearest-neighbor spacings are compared with descriptive Poisson and Wigner-surmise curves, while graph-level spacing ratios are calibrated against size-matched GOE simulations. The observed ratio values are much closer to the finite-size GOE calibration than to unitary or Poisson benchmarks. Graph-level Kolmogorov–Smirnov distributions, pooled empirical-unfolding checks, and connectivity diagnostics are also reported. The results provide finite-size evidence for orthogonal-type local statistics in the selected lift families; they do not constitute a proof of GOE universality.
395203
Călin-Ioan Gheorghiu
395204
Qi Xie, Zhong Chen, Zhiwen Zheng, Shuanglong Zou, Xuan Deng and Jie Jiang
Existing medical image encryption schemes still face challenges associated with limited chaotic complexity, imperfect key design mechanisms, and the difficulty of balancing security and transmission efficiency, which restrict their application in resource-constrained Internet of Medical Things (IoMT) environments. To address these issues, this paper proposes a unified medical image encryption framework based on a novel hyperchaotic system and compressive sensing (CS). First, a four-dimensional hyperchaotic system incorporating quadratic nonlinear terms and bilinear coupling terms is constructed. The system exhibits multiple positive Lyapunov exponents and a broad hyperchaotic operating region, generating highly pseudo-random sequences with an enlarged key space and enhanced key sensitivity. Subsequently, a block CS mechanism is introduced to achieve efficient compression and key-dependent preprocessing transformation, reducing transmission overhead while providing a compact representation for subsequent permutation–diffusion encryption operations. Furthermore, a multi-level permutation strategy integrating Rubik-like block scrambling, global index rearrangement, and Peano curve mapping is developed to disrupt local and global spatial correlations. An orthogonal array-driven Hachimoji DNA diffusion mechanism is further designed, employing bidirectional diffusion and
-based nonlinear operations to improve resistance against statistical and differential attacks. Extensive experiments demonstrate that the proposed framework achieves strong security and reconstruction performance. The encrypted images achieve an average information entropy of 7.9985, with average number of pixels change rate and unified average changing intensity values of
and
, respectively. Moreover, an average peak signal-to-noise ratio of
is achieved at a compression ratio of
. The proposed method provides an efficient solution for secure medical image transmission by balancing security, compression efficiency, and reconstruction accuracy in IoMT environments.
395205
Bogdana A Georgieva
This paper reviews an evolutionary system introduced by the same author in Georgieva (2025 J. Appl. Math. Phys.13 689–708) and uses it to prove a new exact method of solution for nonconservative systems. The vast majority of nonconservative systems with several independent variables do not have self-adjoint Fréchet derivatives and because of that cannot be solved exactly, but only numerically. This paper discusses an exact method for the solution of nonconservative systems with several independent variables. Two examples for applications are given: the propagation of sound waves in a medium with losses or gains, and electromagnetic waves in a conductive medium. These nonconservative processes have been of interest and have been studied by different means but it have never been possible to solve exactly. With the method of this paper this can be accomplished.
395206
C A S Almeida
We identify a geometric threshold in the low-energy spectrum of one-dimensional Dirac systems with a spatially vanishing velocity
coexisting with a domain-wall mass configuration. For
, the first excited-state energy obeys conventional algebraic scaling,
, consistent with dimensional analysis and confirmed cutoff-independently by sparse lattice diagonalization. The linear case
is qualitatively distinct: the exact Morse-potential reduction of the squared Dirac Hamiltonian shows that an ideal linear velocity zero supports precisely one normalizable bound state—the topological Jackiw–Rebbi zero mode—with no intrinsic excitation gap. The excitation energy obeys a two-parameter scaling law,
with
, where
is a universal function of
within the class of smooth domain-wall mass profiles, with Lambert-
asymptotic structure; lattice and continuum solvers collapse onto the same
, confirming that the original lattice result is a cut through this two-parameter surface. Any physical realization rounds the zero at some scale, leaving a nonzero velocity floor
. In the universal regime
, the near-horizon excited states obey an exact square-root ladder,
, with
spacing—the relativistic Landau-level pattern—generated purely by the geometry of the smoothed horizon, confirmed numerically to within
–
, the residual being the predicted correction of relative order
. The linear velocity zero therefore acts as a universal geometric threshold: for
the spectrum obeys conventional power-law scaling; at
the tortoise distance to the horizon diverges, the intrinsic gap closes exactly, and the excitation spectrum is governed by the regularized horizon, with the two-parameter scaling collapse and the
Landau ladder as complementary experimental signatures. Direct realization in photonic waveguide arrays, transmon chains, and strained graphene is discussed.
395207
Yunfei Gao and Chaodian Song
The temperature–sensitive mechanical responses of thermoplastics, including nonlinear elasticity, yielding, strain softening, and hardening, present significant challenges for constitutive modeling. Existing phenomenological models often suffer from ambiguous physical interpretations and exhibit discontinuous transitions between deformation regions. To address these limitations, this study proposes a fractional-order modeling framework based on continuous transition functions. Innovatively, a modified dual-Sigmoid function is employed to achieve seamless coupling between small-strain viscoelastic and large-strain viscoplastic behaviors. The model is validated through uniaxial tensile and compressive experiments on representative thermoplastics. The results demonstrate that the developed fractional model exhibits superior prediction accuracy for the mechanical responses of PC under static or high-strain-rate loading conditions over a broad temperature range. The proposed fractional-order modeling framework provides an effective approach for simulating the thermo-mechanical behavior of thermoplastics across wide temperature ranges.
395208
Qi Li, Ning Li, Hai-qing Huang and Qi Wan
In this paper, we study shifted nonlocal derivative nonlinear Schrödinger (DNLS) equations associated with the Kaup–Newell (KN), Chen–Lee–Liu (CLL) and Gerdjikov–Ivanov (GI) members. These equations are obtained from the corresponding coupled DNLS systems through two types of shifted reductions, namely the complex-conjugate shifted reduction and the real-reverse shifted reduction. Based on the unified double-Wronskian framework previously established for the coupled DNLS systems, we impose compatible matrix constraints on the determinant functions. Under these constraints, the common determinant solutions reduce to explicit solutions of the shifted nonlocal KN, CLL and GI equations. Since the reduced solutions retain the same determinant functions and parameter structure, they provide a convenient setting for comparing how identical shift parameters affect the wave profiles and denominator zero sets of the three members. For the real-reverse shifted one-soliton solutions, we analyze the resulting pole-type singularity structures and illustrate the shift-induced profile changes by contour plots.
395209
Jie Zhang and Li Zhu
Traditional generation methods for multi-scroll attractors have primarily focused on controlling the number of scrolls. To this end, this paper first introduces a nonlinear function constructed based on the Heaviside function into the jerk system, thereby generating a new class of multi-scroll attractors with controllable quantity and adjustable amplitude. Subsequently, under time-varying pulse excitation, the complex topological structure of the multi-scroll attractors is further enhanced. In addition, through theoretical analysis, together with numerical analysis methods including local stability, bifurcation, Lyapunov exponents, and complexity, as well as NIST validation, it is jointly demonstrated that the proposed system can generate high-quality chaotic keystreams. Finally, an audio-video encryption scheme supporting dual modes of full-feature high-intensity encryption and format-compatible selection encryption is designed. This scheme dynamically maps the terminal state of the video-side keystream to the audio keystream, thereby establishing a binding mechanism for joint audio-video encryption. Experimental results show that the proposed encryption scheme not only achieves NPCR and unified average changing intensity values close to the theoretical limits, but also keeps the bitrate increase within 0.05%. In particular, when applied to scenarios with different security requirements, it demonstrates excellent resistance to cryptanalysis and differential attacks, thereby achieving effective data privacy protection.
Particles, fields and nuclear physics
395301
Mahesh Shastri, Navya Rani Marilingaiah, Murthy Muniyappa, Manjunath Shetty, Kunal Roy and Dinesh Rangappa
Lithium-sulfur (Li-S) batteries have gained a lot of attention because of its high energy density (2567 Whkg−1), abundance, and low impact on the environment. The excellent theoretical performance of Li-S batteries is compromised by major technical challenges like low sulfur utilization rate, reduced columbic efficiency, and poor cycling stability due to the insulating nature of sulfur and the shuttle effect of soluble lithium polysulfides. To overcome these concerns, herewith, made an attempt to synthesise Sulfur -reduced graphene oxide (S-RGO) nanocomposite by rapid fast heating technique. Using the solution-based rapid heating method, sulfur nanoparticles uniformly distributed on graphene oxide network. Further, deployed in fabricating Li-S cathode. The S-RGO composite with 70 wt% sulfur exhibits promising results. Initially, at 0.05 C rate discharge current shows 1230 mAh g−1 capacity and at 0.1 C rate shows 1085 mAh g−1. After 50 cycles, the capacity was retained with 1030 mAh g−1 at 0.05C and 957 mAh g−1 at 0.1C. This suggests that the synthesised Li-S nanocomposite exhibit good capacity at higher current rate with greater sulfur content.
Atomic and molecular physics
395401
Gregory L Bason and B Cameron Reed
395402
Chao Long, Shuai Yang, Jiamin Li and Huan Liu
To address the challenges in machining hard and brittle 3C–SiC, this study investigates the material removal mechanism and subsurface damage (SSD) suppression under the synergistic effect of laser thermal softening and ultrasonic elliptical vibration using molecular dynamics simulations. A comparative analysis of conventional grinding, laser-assisted grinding, and laser-ultrasonic elliptical vibration synergistic assisted grinding (LUEVG) was conducted. Results indicate that LUEVG effectively transforms the material removal from brittle fracture to stable plastic shearing, achieving the most uniform debris distribution. LUEVG exhibiting the lowest forces due to the periodic separation effect and reduced yield strength. Furthermore, LUEVG significantly inhibits the initiation and propagation of 1/2 < 110> perfect dislocations, achieving the lowest SSD rate. Stress analysis reveals that while laser assistance expands high-stress regions, vibration effectively alleviates localized compressive stress concentration. This study offers theoretical guidance for the ultra-precision, low-damage machining of hard-brittle semiconductors through thermo-mechanical synergy.
395403
Shashank Singh, Sanjeev Kumar Maurya, Shikha Chandra, Debasmita Chakraborty, Laszlo Gulyás and Lokesh C Tribedi
Electromagnetism, optics and photonics
395501
Yuzhi Jia, Jun Zhu and Liuli Qin
Efficient solar-thermal utilization and photothermal energy conversion rely heavily on high-performance broadband solar absorbers. Herein, a gradient Ti/Al2O3 square-ring metasurface absorber is presented, with its optical performance systematically analyzed using numerical simulations. The device features a stacked pyramidal structure composed of Ti/Al2O3 square-ring resonators, whose lateral dimensions scale progressively along the vertical direction. After parameter optimization, the absorber reaches an average absorptance of 98.4% within the 300–4000 nm range. Its absorptance remains higher than 96% over an ultrabroad spectral window of nearly 3700 nm. Electromagnetic-field distributions reveal that this broadband capability is driven by the synergistic effects of localized surface plasmons, cavity resonances, interlayer coupling, and matched optical impedance. Layer-resolved absorption analysis confirms that the incident light energy is dissipated progressively within the tiered configuration. Furthermore, the absorber demonstrates strong thermal-emission efficiency between 1400 and 2000 K, robust resilience to fabrication tolerances of ±30 nm, and stable performance under oblique incidence and varying polarizations. These attributes highlight the system’s great potential for solar-thermal harvesting, thermophotovoltaics, and high-temperature conversion.
395502
Marcos G F Santos, Alan R Silva, Fabio B de Sousa and Marcos B C Costa
This paper presents a fully automated, data-driven pipeline for the joint dielectric-geometric inverse design of rectangular dielectric resonator antennas (RDRAs) operating at 13.5 GHz in the super high frequency band. Surrogate-based design approaches conventionally adopt artificial neural networks; here, three supervised regression families, multilayer perceptron, random forest and gradient boosting, are instead benchmarked under a common 10-fold cross-validation protocol, using the mean absolute error of the predicted resonant frequency as the selection criterion. The selected model, achieving
for resonant frequency, is extended to a multi-output architecture that predicts five antenna performance metrics, resonant frequency (
), minimum return loss (
), impedance bandwidth, complex input impedance (Re(
), Im(
)) and voltage standing-wave ratio, from four co-design variables: the relative permittivity (
) of a composite material resonator and its three geometric dimensions (
,
,
). A differential evolution optimizer drives the inverse-design stage, returning diverse, multi-objective-satisfying geometries that were independently validated against full-wave ANSYS HFSS simulations, achieving a mean resonant-frequency error below 10 MHz. Treating permittivity as a continuous material-design variable, rather than as a fixed parameter, the framework jointly explores candidate material–geometry combinations and directly links electromagnetic specifications to the corresponding material-fabrication process. Beyond the RDRA case study, this benchmark-first, material-aware methodology is presented as a reproducible template for surrogate-assisted inverse design of other parametrized electromagnetic structures.
395503
Yue Liu, Sheng Zhou, Xiang Guang Wang, Xin Yao Sun, Hong Chi Zhang, Shu Fang Fu, Qiang Zhang and Xuan Zhang Wang
A TiTe2/hBN/TiTe2 metasurface was designed to realized terahertz polarization manipulation. finite element analysis and ab Initio Calculation were adopted to conduct all simulations. The polarization states of transmitted and reflected waves are strongly dependent on incident circular polarization and frequency under oblique incidence. Under left-handed circularly polarized (LCP) and right-handed circularly polarized (RCP) illumination, the output can be switched between circularly polarized wave and linearly polarized wave within well-defined frequency intervals. Electric field distributions reveal distinct focusing behavior for LCP and RCP excitations, which underlies the observed polarization selectivity. The scattering is dominated by electric dipole contributions, as confirmed by multipole analysis. The optimized structure maintains stable and high-performance polarization control, demonstrating potential for practical terahertz photonic applications.
395504
M M Li, J H Li, Y K Liu, X Zhang, H D Ren and Y Q Ma
Two-core optical fibers support different continuous wave (CW) states. We investigate the Fermi–Pasta–Ulam–Tsingou (FPUT) recurrence for the most general asymmetric CW state in two-core fibers. In the normal dispersion regime, linear coupling triggers modulation instability (MI), thereby giving rise to FPUT recurrence. However, such recurrence is highly constrained, occurring only within specific ranges of linear coupling where the coupling is either sufficiently small or near its maximum. This result contrasts with the case of the symmetric CW state, where FPUT recurrence can be observed over a wide range of linear coupling, and with the antisymmetric CW state, where FPUT recurrence is absent because MI does not occur. Coupling coefficient dispersion (CCD) strongly suppresses FPUT recurrence at weak coupling but enhances it with more recurrence cycles at strong coupling. In the anomalous dispersion regime, FPUT recurrence is observed for all linear coupling, yet its characteristics vary with coupling strength. For linear coupling below (above) a critical value, the energy remains predominantly localized in the initially high-power core with the number of FPUT recurrence increasing with linear coupling monotonically (intense energy exchange between the two cores occurs with only very few FPUT recurrence cycles). CCD significantly modulates the number of FPUT recurrence cycles, exhibiting a non-monotonic dependence. The results differ drastically from the behaviors of the symmetric and antisymmetric CW states.
395505
Tingwei Zhang, Yubo Li, Shufang Fu, Haoyuan Song and Xuan-Zhang Wang
Polarization conversion and chiral optical responses are important aspects of optical-field manipulation, yet achieving them in compact and continuously tunable devices remains challenging. In this work, we propose to use natural low-symmetry CdWO4 thin films to achieve strong gyrotropic and chiral optical responses. We derive and simulate the complex Kerr and Faraday angles, and circular dichroism of the CdWO4 film under oblique incidence conditions. The results show strong gyrotropic and significant chiral responses in Reststrahlen frequency band. Crucially, these strong chiroptical responses can be dynamically and continuously tuned simply by adjusting the material’s azimuth angle and incident angle. These giant gyrotropic and chiral responses originate from the synergistic effect of the strong anisotropy caused by the hyperbolic dispersion of CdWO4 and the intrinsic off-diagonal dielectric elements introduced by its monoclinic lattice. This work provides new physical ideas for the development of dynamic polarization control devices.
395506
Ruyun Qian, Yutong Wang, Xianjun Li, Yali Zhao and Xufeng Li
Tunable infrared absorbers based on phase-change materials are commonly discussed in terms of spectral modulation, whereas the phase-dependent redistribution of electromagnetic loss in metal/PCM multilayer cavities remains less well understood. In this work, we numerically investigate a grating-coupled Ag/GST multilayer cavity for reconfigurable mid-infrared absorption. The TiO2 grating modulates the external coupling and spectral response, while the Ag/GST stack forms a vertically confined resonant cavity. In the amorphous GST state, dual absorption peaks appear at 4.2 and 4.8 μm with absorptances of 94.51% and 81.13%, respectively. After GST crystallization, the resonance redshifts to 6.0 μm and reaches an absorptance of 99.53%, with an absorption contrast of 0.87. Electromagnetic-field distributions and domain-integrated power-loss analysis show that the dominant dissipation channel switches from Ag-layer loss in the amorphous state to GST-layer loss in the crystalline state. Control simulations, structural-parameter sweeps and artificial optical-constant analysis further clarify the roles of the TiO2 grating, Ag spacer, multilayer cavity confinement, and GST optical constants in determining the resonance response. These results provide a clear physical picture of phase-change-controlled loss-channel switching in a compact mid-infrared nanophotonic cavity.
395507
Wanyi Yue, Xiongjun Shang and Yuli Liu
395508
Li Li, Yingtian Xu, Hongwei Ding, Yingzhi Wei, Jingyao Bian and Feng Wang
Herein, we report ultraviolet photodetectors (UV PDs) based on Mg-doped zinc oxide (ZnO:Mg) nanowires (NWs) fabricated via chemical vapor deposition, as well as UV PDs constructed with multilayered ZnO:Mg NWs. The as-prepared ZnO:Mg NWs exhibit a preferred c-axis orientation, along with high sensitivity and significantly reduced dark current under 365 nm UV illumination. Notably, the multilayered ZnO:Mg NWs-based UV PDs achieve a substantial performance enhancement: the responsivity increases from 0.19 mA W−1–2.80 mA W−1, and the detectivity rises from 2.05 × 109 Jones to 3.16 × 109 Jones. Furthermore, the response time of the multilayered device is shortened to 0.04 s, which represents a remarkable improvement compared to the 1.91 s response time of the single-layer ZnO:Mg NWs-based PD. Collectively, these results demonstrate that Mg-doped ZnO NWs, especially in the multilayered architecture, hold great promise as advanced building blocks for high-performance, high-sensitivity UV photodetection systems.
395509
Enhui Cui, Tingting Lv, Chao Liu, Dongming Liu and Jinhui Shi
Polarization control is fundamental to the development of terahertz (THz) photonic components, which in turn directly impacts THz communications and integrated optical systems. However, effective multi-state polarization control remains challenging. Here, an inductor–capacitor (LC) resonance-driven THz metasurface is proposed to enable agile polarization control based on vanadium dioxide (VO2). By tailoring the LC resonance, the proposed metasurface achieves multi-state polarization conversion in reflection mode, converting x-linear polarization (x-LP) into y-linear polarization (y-LP), left-handed circular polarization (LCP), and right-handed circular polarization (RCP) at distinct frequencies. The VO2 phase transition further enables a transmissive half-wave plate (HWP) for x-LP to y-LP conversion. The transmissive-reflective HWP response further realizes holographic imaging under arbitrary polarization incidence. The proposed metasurfaces may enrich the capabilities of multi-state polarization control in the THz regime, with potential applications in THz photonics, imaging, and information processing.
395510
A O Kamenev, G O Pyatetskiy, N A Vanyushkin and A H Gevorgyan
The phenomenon of total internal reflection (TIR) is widely used in optics and photonics for transmitting light through fiber-optic communication lines, for creating laser resonators, and for the manufacturing of waveguides in integrated optical circuits, enabling effective control of flux of photons. In this work, we propose a new concept for utilizing TIR at the boundary between the left photonic crystal (PC) and the defect layer (DL) to achieve hypersensitivity of the defect modes (DMs) in a non-magnetic one-dimensional (1D) binary photonic nanostructure with a DL without absorption or gain. A key feature of our concept is that it can be easily implemented even in structures made of conventional dielectric materials, without the use of metamaterials, metals, or very large angles of the incidence of light. Moreover, the sensitivity values we obtained for the three main types of 1D PC structure symmetry exceed those of many sensor models previously reported by other authors. At optimized conditions, the proposed gas sensor exhibits a sensitivity of
and more, a quality factor as high as
and
for 1st and 5th orders of the DM, figure of merit (FOM) of
RIU−1, and limit of detection (
) of
With such high-performance characteristics, the sensor can detect gas mixtures, including CO, CO2, NO2, and others, with high precision. In addition, using the resonant phase method inside the DL which we adapted for 1D PC with a DL we derived, for the first time, analytical expressions for the sensitivity and
-factor of the DMs in optical sensors based on 1D PC under oblique light incidence (including at the TIR angle). Based on these formulas, we studied the spectral characteristics of the sensitivity and
-factor behavior in the structures with three types of symmetry. Moreover, we demonstrated that ultra-high-sensitivity mode provides refractive index resolution at the level of
, which opens up the possibility of creating next-generation gas sensors.
395511
Yinmei Yu, An Fang and Yunping Qi
This work proposes and investigates a VO2-integrated terahertz metasurface exhibiting an actively tunable electromagnetically induced transparency (EIT)-like response. By incorporating a buried VO2 phase-transition layer beneath the metallic resonators, the EIT-like response is dynamically controlled through VO2-induced variations in electromagnetic loss and modal damping during its insulator-to-metal transition. The underlying switching mechanism is elucidated through a combination of surface-current distributions, electric-field and Ohmic-loss analyses, together with a classical coupled two-oscillator model. The proposed metasurface achieves an ultrahigh modulation depth of 97.55% by controlling the EIT-like transparency window, while simultaneously maintaining a maximum group delay of 4.01 ps for slow-light propagation. Furthermore, the device exhibits good tolerance against variations in polarization and incident angle, and offers refractive-index sensing capabilities with a sensitivity of 0.326 THz RIU−1, a quality factor of 9.07, and a figure of merit of 2.54 RIU−1. A feasible fabrication approach is also discussed. These findings present a compact, multifunctional terahertz platform that integrates active modulation, slow-light control, and refractive-index sensing, thereby offering promising applications in reconfigurable terahertz metadevices.
Plasma physics and fusion
395601
The following article is Open access
Raif Hamzah, Lim Lian Kuang, Haruna Peter Wante and Yap Seong Ling
Phenomenon of concurrent external discharges and plasma expansion can occur in practical coaxial dielectric barrier discharge (DBD) systems, yet their impact on electrical diagnostics and discharge behavior remains insufficiently understood. To investigate these effects, a coaxial atmospheric-pressure air DBD operated at 21–27 kV and 21 kHz was studied using both insulated and uninsulated mesh ground electrodes. Lissajous analysis showed that electrode insulation significantly alters equivalent-circuit parameters and power dissipation. In the insulated configuration, the effective dielectric capacitance exceeded the geometrical value at applied voltage above 24 kV, indicating over-discharge and possible virtual electrode formation. The resulting over-discharge capacitance reached 2.1 pF, corresponding to an effective discharge extension of up to 3.6 mm. In contrast, the uninsulated configuration revealed substantial power redistribution to external discharges, limiting the plasma volume within the reactor. At 27 kV, a minimum parasitic power loss of 7.5 W was estimated in the absence of insulation on the ground electrode, corresponding to an approximately 18% increase compared with the insulated configuration. Statistical analysis of 120 current waveforms per operating condition showed that external discharges in the uninsulated configuration strongly influence internal microdischarge behavior. While microdischarge amplitudes remained largely unchanged, their lifetimes decreased by up to 2 ns. Under uninsulated conditions, temporal distributions became strongly polarity-dependent, whereas they remained similar for both polarities in the insulated case. Consistently, the positive-to-negative microdischarge ratio approached symmetry under insulation (0.50 at 27 kV) but remained asymmetric without insulation. Phase-shift analysis further indicated an increased resistive contribution associated with external discharges. These findings demonstrate that external discharges not only dissipate energy but also modulate internal microdischarge dynamics in a phase-dependent manner, providing important guidance for the interpretation of electrical diagnostics and the design of high-efficiency plasma reactors.
395602
The following article is Open access
R A B Nilsen, S Brynjulfsen, O E Garcia and A Theodorsen
The study of large amplitude-fluctuations is relevant to many different fields of science. It is vital to know that the methods used to analyze them are robust and provide reliable results. Conditional sampling and averaging is one such method that is used to extract and estimate various characteristics of large-amplitude events. Former studies analyzing the properties of this method have only concerned themselves with well-separated events, both in time and space. This is not always a guaranty in real-life data as large-amplitude fluctuations may be closely spaced or overlap to the point where underlying small-amplitude events result in large fluctuations. In this study, we examine the conditional sampling and averaging method to identify where its outputs are reliable for different degrees of pulse overlap. To do this, we analyze synthetic test-signals from a superposition of overlapping pulses that were fed through the conditional averaging scheme to unveil the routines limitations in recovering the underlying statistics and metrics of the original signal. Different sampling conditions and input parameters were examined to discover where and how they affect the outputs in the face of pulse overlap. We found that the waveform-estimates of the method are generally reliable for low and moderate degrees of pulse overlap. The amplitude distributions were discovered to break down with increasing pulse overlap. The waiting time distributions were not reliable under any level of pulse overlap. We use our findings to provide recommendations for input parameters and for interpreting the validity of the outputs in combination with other methods.
Condensed matter and materials physics
395901
Hannah Jeniffer I, Sudharsan J B, Mahalakshmi P and Punithavelan N
Using first-principles calculations, we have identified TiPtSi and TiPtGe as promising half-Heusler thermoelectric (TE) materials. Both alloys stabilize in the cubic
(No. 216) structure and exhibit robust elastic stability. Electronic structure calculations using the generalized gradient approximation and TB-mBJ functionals reveal an indirect semiconducting character with band gaps near 1 eV, which is favorable for TE performance. Transport analysis predicts high TE efficiency, with peak dimensionless figures of merit reaching 0.83 for TiPtSi and 0.77 for TiPtGe. The combined structural stability and strong TE response highlight these compounds as attractive candidates for further optimization and experimental realization.
395902
Xuepeng Liu and Wei Hu
Deviatoric stress-driven fusion of nanocrystal superlattices (NCSLs) offers a promising route for the large-scale fabrication of nanowires. Here, we carry out atomistic molecular dynamic simulations to study the orientation-dependent mechanical responses of face-centered cubic alkylthiol-coated gold NCSLs under deviatoric stress. The results show that the coalescence behavior of gold NCSLs under deviatoric compression is strongly dependent on the crystallographic orientation relative to the loading direction. Ordered nanowire arrays can be formed along the low-index [100] and [110] crystallographic orientations. However, loading applied along the high-index [111] and
orientations does not lead to the formation of mechanically stable nanowires. The orientation dependence of the nanowire formation is attributed to the variation in interparticle spacing along the loading direction, which increases with the Miller indices of the loading direction. For the high-index
and [111] directions, the relatively large interparticle spacing along the compression direction hinders the fusion of neighboring gold NCs and thus suppress the formation of nanowire arrays. In particular, both the critical hydrostatic pressure and deviatoric stress required to form the nanowire arrays along the [100] orientation are significantly lower than their counterparts along the [110] orientation, which originates from the different packing configurations along the two orientations. The packing geometry along the [100] orientation features a triangular coordination configuration, which provides strong lateral constraints that prevent shear instability and enables the formation of nanowire arrays even under low stress levels. In contrast, the packing alignment along the [110] orientation lacks such confinement, making it susceptible to shear-induced bending and thus necessitating a higher level of stress to facilitate the formation of nanowires. This work offers deeper insights into the orientation-dependent mechanical responses of NCSLs under deviatoric stress.
395903
Shuhang Liao, Jiaqi Su, Binye Liang and Zian Li
Low-dose electron holography enables quantitative phase imaging of electron-beam-sensitive materials and weak electromagnetic fields, but reduced electron counts introduce severe noise that limits phase reconstruction accuracy and stability. Here, we develop a denoising method for off-axis electron holography based on frequency-domain component separation and Gaussian process regression (GPR). By selectively preserving sideband information and applying GPR denoising to the non-sideband component, the proposed approach suppresses noise-induced fluctuations while maintaining holographic phase information. The method is validated using simulated holograms over a wide range of signal-to-noise ratios and low-dose experimental electron holograms. Compared with conventional filtering methods and wavelet-based approaches, GPR provides improved noise suppression, reduced phase reconstruction errors, and enhanced robustness under extremely low-dose conditions. This approach offers a practical strategy for improving quantitative phase measurements in low-dose electron holography and broadens the applicability of electron holography for sensitive nanoscale materials and electromagnetic-field characterization.
395904
A M Abdulkarem and A A Al-Muntaser
Photocatalysis has emerged as an effective and sustainable approach for addressing environmental and energy challenges. In this study, Bi60In2O93 nanoparticles NPs were successfully synthesized via a hydrothermal method with varying Bi molar ratios. Structural and morphological characterizations were carried out using x-ray diffraction, Williamson–Hall (W–H) analysis, field emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscopy. W–H analysis revealed a systematic increase in crystallite size from 30.5–72.0 nm with increasing bismuth content, accompanied by a rise in lattice microstrain from 1.87 × 10−4 to 14.1 × 10−4, indicating enhanced grain growth and structural evolution. FE-SEM analysis further confirmed this trend, showing an increase in average particle size from 61.2–77.7 nm at higher Bi:In ratios.Ultraviolet–Vis diffuse reflectance spectroscopy indicated band gap energies in the range of 2.67–3.15 eV, demonstrating improved visible-light absorption with increasing bismuth content. The photocatalytic performance was evaluated through the degradation of Rhodamine B under visible-light irradiation. Among the prepared samples, sample D exhibited the highest activity, achieving approximately 98% degradation within 45 min, with an apparent rate constant of 0.10082 min−1. The enhanced photocatalytic performance is attributed to the synergistic effects of band-gap narrowing, improved charge separation, and favorable nanostructure, which promote efficient generation of reactive oxygen species. These findings demonstrate that Bi60In2O93 nanoparticles are promising candidates for visible-light-driven photocatalytic applications.
395905
Dongting Wu, Yuhang Zhang, Chunying Zheng, Mankun Zhang and Yong Zou
A three-dimensional coupled numerical model was developed to simulate droplet transfer and weld pool dynamics in bypass-coupled twin-wire indirect arc welding (BC-TWIAW). The model couples electromagnetic, fluid flow, and heat transfer phenomena, accounting for the dual-arc current topology unique to this process. Results reveal that the positive electrode wire, serving as a common node for both direct and indirect arc currents, experiences a significantly larger and deflecting electromagnetic force compared to the negative wire, leading to fundamentally different droplet transfer behaviors. Alternating droplet impacts from the two wires create intermittent heat and momentum inputs, generating characteristic flow patterns and a ‘step’ structure at the solidification front. The weld pool temperature distribution is governed by the indirect-arc surface heating and the convective loop formed by arc-pressure-driven downward flow and buoyancy-driven upward flow. These findings provide physical insight into the coupled droplet–pool mechanisms in BC-TWIAW and demonstrate the model’s potential for process analysis and optimization.
395906
Aqeel Raad Ghafel
We report drive-tunable dynamic compensation in a three-sublattice nanostructure. A ternary hexagonal nanowire carrying spins S = 7/2, s = 5/2, and σ = 3/2 on its core, middle, and outer sublattices—a minimal lattice abstraction motivated by the Gd(Cr1−xFex)O3 orthoperovskite platform, with all three magnetic ions in their trivalent high-spin states—is driven by a sinusoidal magnetic field and solved by mean-field Glauber dynamics, with the exchange-stiff middle sublattice antiferromagnetically opposing the two softer ones. The cycle-averaged total magnetization crosses zero while all three sublattice order parameters remain finite, defining a dynamic compensation temperature tcompdyn that approaches its static counterpart in the high-frequency limit and is relocated by nearly a factor of two (from 2.12 to 1.09 in units of Jm/kB) by the drive amplitude alone at fixed material parameters, with a weaker monotonic frequency dispersion. Constructing the dynamic phase diagram in the (h0, t) plane, we locate the continuous and discontinuous branches of the dynamic phase transition by an explicit two-attractor criterion and identify a dynamic tricritical point at (h0*, t*)≈(6.2, 4.83) at ω = 1, where the ferromagnetic–paramagnetic coexistence interval closes; inside the coexistence region two stable stationary limit cycles—one symmetry-broken, one field-symmetric—are demonstrated explicitly. The dynamic hysteresis loops evolve from displaced minor loops in the ordered phase to centrosymmetric loops with vanishing cycle-averaged magnetization above the transition, and the loop area peaks near the dynamic transition. To the best of our knowledge, these results provide the first dynamic compensation point and dynamic tricritical point reported for a nanostructure with three spatially distinct sublattices, extending the dynamic-compensation phenomenology beyond the two-sublattice and ternary-alloy settings.
395907
Santanu De and Biswajit Dutta
There exists a broad class of materials in which lattice, charge, and magnetic degrees of freedom exhibit strong correlations. Substantiating this non-trivial interplay remains a formidable challenge when relying on conventional experimental techniques. To address this issue, we have developed a magneto-ultrasound probe capable of elucidating magnetoelastic coupling (MEC) across a wide variety of systems. In this approach, the magnetic response of strongly correlated materials is measured under the influence of ultrasound excitations. The technique has been systematically tested in metallic, insulating, and superconducting compounds, including Nb-metal, Gd
O
, Ca
Co
O
, Fe
O
, and YBa
Cu
O
. Our results reveal that the magnetic properties of superconducting and charge ordering systems are significantly modified by the propagation of ultrasound waves. This observation provides direct evidence for the pronounced influence of lattice dynamics on magnetism in correlated electron systems, thereby establishing magneto-ultrasound as a sensitive probe of MECs.
Machine learning with application to physical science
396001
The following article is Open access
Daeun Kim, Jaeyoon Cho, Jiwon Lee, Wonjun Jeong, Hyeongwoo Noh, Giyeong Kim, Seunghwan Yang and MinJung Kweon
Quark–gluon discrimination provides a useful test case for studying how different machine-learning architectures learn the spatial structure of QCD radiation. In this work, we compare convolutional neural network (CNN), vision transformers (ViT), and hierarchical Swin transformers using the same three-channel jet-image representation, consisting of charged-particle momentum, neutral-particle momentum, and charged-particle multiplicity from PYTHIA 8 jets. We study their performance for different training-set sizes and fine-tuning configurations, with particular attention to the role of local and global information in the jet images. CNN and Swin models consistently perform better than ViT in the cases studied. Since both CNN and Swin retain a strong local component in their architectures, this suggests that local jet substructure plays an important role in quark–gluon discrimination. The performance of the hierarchical Swin model also suggests that combining local features over larger spatial scales is useful. Block-wise fine-tuning improves the performance of the transformer models, although the improvement becomes smaller and the training less stable as more blocks are unfrozen. We also find that self-supervised momentum contrast pretraining improves the model initialization, particularly when the amount of labeled training data is limited. Based on these observations, we developed a smaller Swin model adopted to the jet-image representation used in this study. It achieves comparable performance with substantially fewer parameters. The results show that it is important to adapt the model architecture and training procedure to the specific input characteristics of high energy physics (HEP) data when applying vision models in HEP.
Corrigendum
399501
The following article is Free article
Jun Bao Wang, Lan Ju Liang, Ju Gao and Xiao Zhong Tian
Retractions
399701
The following article is Free article
Inamul Mursaleen, Junaid Munir, Quratul Ain, Abdullah S Aldwayyan, Hamid Ghaithan, Abdullah Ahmed Ali Ahmed and Saif M H Qaid
399702
The following article is Free article
Faiz Muhammad Khan, Amjad Ali, Zia Ullah Khan, M R Alharthi and Abdel-Haleem Abdel-Aty