Papers
General and interdisciplinary, including biophysics, geophysics and astrophysics
225001
Shixin Zhu, Hang Zhou, Ruochong Zhang and Minghuan Wang
In this study, a three-dimensional multiphysics coupled model is developed for the pulsed electrochemical end-face thinning (PE-EFT) of micro-slit array and is experimentally validated. The model couples the flow, electric, and thermal fields with bubbly turbulent flow to simulate the thinning process under varying voltages and removed thicknesses. Simulation results show that the end-face thinning rate increases with the applied voltage, whereas micro-slit width tends to be bigger at high voltage or at small final thicknesses of the micro-slit array workpiece. Stable thinning could be achieved when the removed thickness was about 250 μm. Moreover, the built model predicts the distributions of gas volume fraction, temperature, and current density within the interelectrode gap. The gas volume fraction increases along the flow direction; temperature exhibits a similar trend, while the overall temperature rise remains limited due to high-velocity electrolyte flushing. The current density concentrates at the bottom corner of the micro-slit, promoting corner rounding. Experiments performed at 10 V using the optimized parameters show good agreement between the measured cross-sectional morphology and the simulation result, with a maximum deviation of 0.02 mm, confirming the validity of the model. This study provides a theoretical basis and process guidance for precision PE-EFT of micro-slit array workpiece.
225002
Mir Qurrat Ul Ain, Abhijit Dey, Mohmmad Farooq Wani, Rakesh Sehgal and Mohammad Mohsin Khan
This study reports the synthesis and comprehensive evaluation of functionally graded WC–Cr3C2–Ni composite coatings deposited on Ni-C263 superalloy substrates via multi-target magnetron sputtering. The graded architecture, designed to transition from a Ni-rich interfacial layer to a carbide-enriched surface, significantly enhanced adhesion, hardness, and thermal stability. Structural and compositional analysis using Scanning Electron Microscopy (SEM), Energy-Dispersive (XRD) revealed a nanocrystalline, defect-free morphology with uniform elemental distribution. Cross-sectional imaging confirmed a dense interface without cracks, pores, or delamination, while profilometry indicated ultra-smooth surfaces (Ra ≈ 2.63 nm). Nanoindentation testing yielded high hardness values (~12.5 GPa) with minimal scatter, underscoring mechanical homogeneity across the coating. The integration of challenging carbide phases within a ductile Ni matrix endowed the coatings with superior resistance to erosion, oxidation, and hydrogen permeation. These results establish WC–Cr3C2–Ni graded coatings as reliable surface protection systems for high-temperature, radiation-intense, and corrosive environments in next-generation nuclear reactors.
225003
Vaibhav Wasnik
The Minkowski vacuum is often presented in textbooks and reviews as a thermofield double (TFD) state, an entangled state of field modes in the left and right Rindler wedges. This picture is widely used to explain the Unruh effect, motivate entanglement entropy calculations, and connect quantum field theory to black hole thermodynamics and AdS/CFT. However, we show that this interpretation, while elegant, is not exact. We explicitly compute two-point functions and their derivatives for a massless scalar field in two-dimensional Minkowski space, comparing results obtained from canonical quantization with those obtained by assuming a TFD form of the vacuum. Mixed-derivative correlators agree perfectly, but higher-derivative correlators show systematic mismatches that persist even for points well away from horizons and are not removed by infrared regularization. To further test this picture, we construct an alternate coordinate system that divides Minkowski spacetime into two disconnected regions, apply the same derivation that leads to the standard TFD expression, and obtain a new ‘entangled-state’ representation of the vacuum that is not thermal. This demonstrates that the appearance of a TFD structure is a feature of the derivation method rather than a fundamental property of the vacuum. Our results clarify the limits of interpreting the Minkowski vacuum as a literal TFD state, emphasizing that while it captures key thermal features, it should be viewed as a powerful calculational tool rather than a precise statement about Hilbert space structure.
225004
Sonu Kumar and Ruchi Agarwal
This paper presents a techno-economic optimization framework for a hybrid energy system that combines photovoltaic (PV) generation, utility grid connection, diesel generator (DG), battery energy storage system (BESS), and an electric vehicle charging station supporting V2G and grid to vehicle integration to improve the energy resilience of a medium-sized campus load in India. The system is modelled by using HOMER grid software for the optimal sizing of BESS and energy dispatch strategies under regional grid outage patterns, operational and environmental uncertainties, and the two-part tariff structure of Uttar Pradesh Electricity Regulatory Commission. For the existing infrastructure of campus (450 kW PV and undersized 350 kW DG), the simulation optimizes BESS to minimize the net present cost, levelized cost of energy (LCOE), payback period, and other important resilience parameters subject to a strict 0% unmet load reliability threshold against a 520 kW peak campus demand. Furthermore, the resilience analysis demonstrates that the optimized BESS integration extends autonomous outage coverage from zero to up to 24 h under favourable high-irradiance conditions with minimum DG operation.
225005
The following article is Open access
Dona Ghosh, A Pal, Z Ahmed and Jayshri Bachhav
Quantum tunneling through potential barriers plays a central role in diverse physical phenomena ranging from nuclear fusion and radioactive decay to semiconductor devices and superconducting technologies. In this work, we calculate tunneling probabilities and wave functions for an arbitrary number of potential barriers with diverse functional forms, including square, Gaussian, parabolic, and Lorentzian profiles, using a general numerical framework. The numerical results are first validated by comparison with exact analytical solutions for double, triple and quadruple-square barrier systems, demonstrating excellent agreement. The results reveal that for a system with
barriers, a single resonance peak splits into
distinct peaks, which eventually merge into an energy band as
becomes large, in a manner fully consistent with the existing literature. A key additional result is the incorporation of absorption effects through an imaginary component of the potential, providing a realistic description of particle trapping and leading to a progressive suppression of resonant transmission. For sufficiently strong absorption, the resonant structures are completely washed out. Further, if the barriers become non-uniform or disordered, the regular resonance pattern is also observed to be completely washed out. These findings demonstrate the broad applicability of the approach to complex potential landscapes and offer insights relevant to both fundamental quantum mechanics and the design of next-generation quantum devices.
225006
Jinhu Fan, Leyan Li, Xian Jiang, Zihan Li, Aoyang Tang, Wenzhe Gong, Zhiyong Liu, Lei Nie and Guanglan Liao
Focused traveling surface acoustic wave (FTSAW) microfluidics enables biocompatible, size-selective manipulation of microparticles, yet most existing numerical studies rely on two-dimensional models that neglect axial acoustic attenuation and three-dimensional flow structures, limiting accurate interpretation of separation mechanisms. Here, a three-dimensional multiphysics finite element model is developed to resolve the electromechanical excitation, acoustic–fluid interaction, and particle dynamics in FTSAW-driven microchannels, and is experimentally validated with a resonance frequency prediction error of only 0.5% at 39.0 MHz. The model reveals a highly localized three-dimensional acoustic focal zone and an acoustic corner-effect region arising from leaky longitudinal acoustic-wave radiation at the Rayleigh angle (∼22°), leading to a pronounced three-dimensional force imbalance between acoustic radiation force (ARF) and acoustic streaming-induced drag. As a result, 15 μm particles experience strong lateral deflection up to 84 μm under driving voltages of 10–15 V, whereas 3 μm particles follow streaming-dominated streamlines with limited net lateral displacement, enabling effective size-dependent trajectory separation under the simulated operating conditions. By resolving axial acoustic attenuation, three-dimensional focal-zone morphology, height-dependent acoustic streaming structures, and the force imbalance between ARF and hydrodynamic drag, this work provides physical insights and quantitative guidance for optimizing FTSAW sorting devices.
225007
Ishita Ghorai, Harsh Soni, Aniruddha Chakraborty and Partha Ghose
Hamiltonian monodromy is investigated in a cosmologically motivated minisuperspace model with a complex scalar field governed by a symmetry-breaking Mexican-hat potential. Expressed in radial and angular variables, the matter sector forms an integrable two-degree-of-freedom Hamiltonian with a focus–focus singularity. Semiclassical Einstein–Brillouin–Keller quantization yields a discrete joint quantum spectrum labeled by angular momentum and radial quantum numbers, exhibiting the characteristic lattice defect associated with Hamiltonian monodromy. Difference spectra and a compact one-dimensional diagnostic are introduced to expose this global feature even when the raw energy bands appear nearly linear. Coupling the system to a spatially flat Friedmann–Robertson–Walker (FRW) minisuperspace shows that cosmological expansion enters only as an overall gravitational dressing, leaving the monodromy structure unchanged. By contrast, single-field FRW minisuperspace is shown to obey a no-go result for Hamiltonian monodromy.
225008
Yasaman Sefid-Sefidehkhan, Maryam Khoubnasabjafari, Abolghasem Jouyban and Elaheh Rahimpour
In the present study, a methylene blue modified-carbon quantum dot (MB-modified CQDs) nanocomposite has been synthesized and characterized using transmission electron microscopy, dynamic light scattering and attenuated total reflectance-Fourier transforms infrared, x-ray diffraction, and EDX analysis. The synthesized nanocomposite possesses a mean size of <20 nm with spherical morphology. A nanoprobe based on MB-modified CQDs was designed and applied for the determination of methotrexate in plasma samples. The absorbance intensity of the nanoprobe was markedly decreased in the presence of methotrexate under optimal conditions in the concentration range of 0.05–7.0 µg·ml−1. The detection limit for methotrexate in plasma samples was found to be 0.03 µg·ml−1. The validated system demonstrated good repeatability, simplicity, and stability toward methotrexate sensing in the plasma of patients receiving the drug.
Quantum optics, processing and information
225101
Mrittunjoy Guha Majumdar
Hyperentanglement enables a class of network capabilities inaccessible to conventional quantum networks. We establish that hyperentangled systems can encode causal indefiniteness across degrees-of-freedom (DoFs), enabling communication protocols that exploit superpositions of causal orders to outperform classical and definite-order quantum strategies. We further show that hyperentanglement facilitates resource catalysis, wherein entanglement in one DoF remotely induces entanglement in another without direct transmission within that space. Additionally, we introduce the concept of context morphing, where hyperentangled states enable coherent transduction between fundamentally incompatible network modalities, such as free-space orbital angular momentum channels and fiber-based time-bin links. These mechanisms position hyperentanglement as a foundational resource for future quantum networks characterized by enhanced interoperability, adaptivity, and non-classical communication advantages.
225102
İsmail Burak Ateş, Şengül Kuru, Javier Negro and Ege Özkan
The aim of this letter is to compute the evolution of some expected values, such as the field operators a±, quadratures and atomic inversion, under supersymmetric (SUSY) partner Hamiltonians associated to the Jaynes-Cummings Hamiltonian of quantum optics. This kind of SUSY partners are characterized by having spectra which differ in a finite number of energy levels. We wish to elucidate if the partner connection has any influence on these expected values. In particular, we want also to know in which way the classical and revival times are affected by such SUSY partners.
225103
The following article is Open access
Rushit Kansara, María Isabel Roldán Serrano and Martin Bähr
Multi-objective optimization (MOO) remains a significant computational challenge, particularly for high-dimensional, non-convex problems which demand substantial computational effort from traditional evolutionary algorithms to obtain a Pareto front that is both well converged and uniformly diverse. To address this challenge, this work presents the quantum-assisted non-dominated sorting genetic algorithm (QANSGA), a novel hybrid heuristic that leverages principles of quantum annealing to enhance the core mechanisms of classical MOO genetic algorithm. The quantum component is realized via a D-Wave quantum annealer, which is used to implement quantum mutation operators and facilitate the injection of highly promising quantum solutions into the classical population pool. This hybrid mechanism fundamentally improves the population’s diversity maintenance, the global search capability and accelerates its convergence dynamics toward the true Pareto-optimal set, achieving the desired global optimum Pareto front in fewer generations. To rigorously evaluate its performance, we benchmark QANSGA against leading classical genetic algorithm (GA) for MOO problems, which is non-dominated sorting genetic algorithm (NSGA-II) across a widely used suite of complex multi-objective benchmark problems.
The results provide compelling evidence for the efficacy of quantum-inspired heuristics in overcoming the efficiency bottlenecks of conventional MOO methods. The study concluded that QANSGA outperforms classical NSGA-II in terms of convergence and diversity by 33% and 42% respectively on an average when applied to 6 benchmark multi-objective problems. This work positions QANSGA as a valuable new hybrid algorithm, paving the way for novel approaches to tackle multi-objective, complex optimization challenges in areas like energy system design, resource allocation, and logistics.
225104
Mussaab I Niass, Hameed Ur Rehman, Mohammed S M Gismalla, Fang Wang, Wengang Bi and Yuhuai Liu
Deep ultraviolet (DUV) edge-emitting laser diodes (EELDs) are emerging as essential optoelectronic devices with broad applications in health diagnostics, communication systems, and advanced manufacturing. This work investigates the use of boron gallium nitride (BGaN) as the active layer in DUV EELDs, with emphasis on the influence of the bandgap bowing parameter on key optical and electrical characteristics. Using the Crosslight simulation platform, a detailed analysis of device structure and performance was conducted. The optimized design achieved a peak power output of 37.6 W at an emission wavelength of 311.4 nm, with power decreasing by up to 7% at longer wavelengths. Optical confinement analysis shows the confinement factor remains stable at ∼18.95% for bowing values up to 7 eV, but drops sharply to 13.67% at 8 eV, due to weakened carrier confinement from compressed QW/QB band offsets. The refractive index profile reveals a high-index (n ≈ 2.392) active region between lower-index cladding and barrier layers, ensuring strong optical confinement. Threshold current density (Jth) trends indicate an initial 9.4% rise from 93.23 kA cm−2 at 1 eV to 102.00 kA cm−2 at 5 eV, followed by a 22.5% drop to 79.00 kA cm−2 at 7 eV, highlighting a substantial ∼29.7% variation across the tested range. These findings demonstrate that precise control of the boron bowing parameter is critical to balancing carrier confinement, optical mode confinement, and threshold performance, positioning BGaN as a strong candidate for next-generation high-efficiency DUV optoelectronic devices.
225105
Ruyu Yan, Wenkai Yang and Liang Qiu
We study the performance of a two-qubit Ising quantum battery, initially prepared in the highest-energy state, following successive propagation through a correlated colored dephasing channel. The connection between battery performance and quantum speed limit time (QSLT) is also considered. The findings reveal that classical correlation of the channel can protect and enhance battery performance. In a fully correlated channel, no self-discharge occurs. Moreover, the temporal evolution of the QSLT upper bound is negatively correlated with that of the battery performance, thus establishing a negative correlation between battery performance and the QSLT upper bound.
225106
The following article is Open access
Kyu-Won Park, Soojoon Lee and Kabgyun Jeong
The Wigner function is a phase-space quasiprobability distribution whose negative regions provide a direct local signature of nonclassicality. To identify where phase-sensitive structure concentrates, we define local positive and negative Wigner-weight maps and use the integrated Wigner negativity as a compact scalar diagnostic of nonclassical phase-space structure. A decomposition of the density operator reveals that off-diagonal coherences between hybridizing components generate oscillatory sign-alternating patterns, with the negative contribution maximized when component weights are comparable. Non-Gaussian chaotic eigenmodes exhibit a baseline negativity that is further amplified by such hybridization. We demonstrate the robustness of these diagnostics across two billiard geometries and suggest that the same sign-resolved analysis can be applied to other wave-chaotic platforms, where it may aid mode engineering and coherence control.
225107
Mohd Shoaib Qureshi and Tabish Qureshi
Quantum decoherence refers to the phenomenon when the interaction of a quantum system with its environment results in the degradation of quantum coherence. Decoherence is considered to be the most popular mechanism responsible for the emergence of classicality from quantum mechanics. The issue of formulating a measure of decoherence is addressed here. The approach taken here is that decoherence results from the entanglement of a quantum system with certain environment degrees of freedom, and quantifying this entanglement should yield the most natural measure of decoherence. A simple measure of decoherence is presented based on this notion, and it is examined for various example systems. The measure proves to be effective and is relatively straightforward to compute. In addition, a method has been proposed to measure decoherence in a Mach–Zehnder interferometer which may be useful in neutron interferometry.
225108
Sahajkumar A Gandhi, Divyeshbhai Y Chaudhari, Pinkesh G Sutariya, Krushna A Baraiya, Saurabh S Soni and Anju P Kunjadiya
Water-soluble luminescent cadmium sulfide quantum dots (CdS QDs) capped with thioglycolic acid were synthesized in an aqueous medium. The hydrodynamic diameter of the produced CdS QDs in aqueous solution was measured to be 5.16 nm using dynamic light scattering techniques, which closely aligns with high-resolution transmission electron microscopy. The optical band gap of the synthesized CdS QDs was determined to be 4.39 eV, which is greater than that of bulk CdS. Structural analyzes were conducted utilizing powder x-ray diffraction, which validated the cubic phase of CdS. A unique hybrid organic–inorganic molecular assembly (CdS@PBCD and CdS@PSC) has been synthesized by integrating CdS QDs with supramolecular compounds, specifically p-tert-butyl calix[4]arene di acid (PBCD) and p-sulfonatocalix[4]arene (PSC). Furthermore, we investigated how interactions with amino acids influenced the fluorescence characteristics of the CdS@PSC and CdS@PBCD molecular complexes. A significant enhancement in fluorescence was noted for the tryptophan CdS@PSC composite upon interaction with all tested amino acids. The synergistic assembly of these structures led to a marked increase in fluorescence emission, facilitating the measurement of DL-tryptophan over a broad concentration range. This resulted in a calibration curve exhibiting high linearity (R2 ≈ 0.99). The Stern–Volmer plot indicated that the limit of detection and limit of quantification were determined to be 19.2 ppm and 58.4 ppm, respectively. Furthermore, the antibacterial properties of CdS QDs, CdS@PBCD and CdS@PSC were assessed against microorganisms, revealing that CdS@PBCD exhibited lower toxicity.
225109
Ivan B Karomi and Nawal M Almalky
Studying the optical modal gain in semiconductor lasers can reveal a complete image of the optical properties and performance of these devices, thereby enabling enhancement of their optical and spectral properties. In this report, we examine the evolution of the optical modal gain as a function of pumped current and temperature (150–400 K) in a visible InP quantum dot (QD) laser, which is beneficial for photonic and biosensors applications. The optical gain spectra in this material were measured with the multisection device technique. It is found that the differential gain (dG/dI) significantly decreases with temperature above 200 K due to the increase of the nonradiative recombination process. At a fixed gain peak, the center wavelength of the gain spectrum exhibited a redshift of 37 nm, owing to lattice expansion with temperature, and the gain bandwidth increased from 9.39 to 28.21 nm, due to the state-filling effect in QDs, when the temperature increased from 150 to 400 K. Moreover, the injection level of the InP QD at a fixed gain increases with temperature, by 0.11 meV K−1 below 300 K and by 0.223 meV K−1 above 300 K, due to enhanced carrier escape. These results were supported by measuring the characteristic temperature, To, of a 2000 µm laser device, showing less temperature sensitivity with To ∼ 380 K at range (150–230 K), and high temperature sensitivity with To ∼ 59 K at range (300–370 K). The broad bandwidth of the optical gain spectra reported in this study opens the path to use these materials in wide range of applications.
225110
Xiaoyu Song, Hua Nan, Lingman Wang and Yicheng Hong
225111
Lin-tao Du and Ri-Gui Zhou
The semi-device-independent (DI) scenario requires measurement outcomes to be perfectly accurate, which is generally unattainable in experiments. To address this limitation, we consider an measurement-DI (MDI) scheme that relaxes the constraints on measurement outcomes. However, a fully MDI framework imposes strong quantum capability requirements on all communicating parties. To overcome this, we propose a semi-MDI (SMDI) framework and demonstrate its security within a communication channel. Building on this, we introduce a quantum steering distillation protocol based on the SMDI framework that can tolerate arbitrary imprecise measurements. Furthermore, we successfully distill mixed steerable states, demonstrating that even imperfect states can be distilled into maximally steerable states within the allowed range of measurement errors.
225112
Mohit Joshi, Manoj Kumar Mishra and S Karthikeyan
An efficient technique of computing on encrypted data allows a client with limited capability to perform complex operations on a powerful remote server without leaking anything about the input or output. Quantum computing provides information-theoretic security to solve such a problem, and many such techniques have been proposed under the premises of half-blind quantum computation. However, these approaches are based on some universal combination of non-parametric gates (
,
,
,
,
, and
). Hybrid quantum–classical algorithms require parametric gates, which, when decomposed into non-parametric gates, inadvertently increase the depth of the circuit and hence the communication rounds. We propose an approach for recursive decryption of any parametric gate,
, without prior decomposition; exactly when
for
, and approximately with arbitrary precision
for any given
. We also show that a blind algorithm based on such a technique needs at most
computation steps and communication rounds, while the techniques based on a non-parametric resource set require
. We use this approach to propose a half-blind quantum computation protocol to enable efficient computation on encrypted data in the NISQ era.
Mathematical physics, complex systems and nonlinear dynamics
225201
Arpita Charan and Rajeev
This article establishes the fixed (FX) time stability analysis of an inertial memristor-based complex-valued neural network with impulse effects (IEs) and mixed time-varying delays. To overcome the analytical difficulties arising from the 2nd order dynamics, the original system is first transformed into an equivalent 1st order framework. The resulting complex-valued model is then decomposed into two coupled real-valued subsystems, enabling a rigorous and tractable stability investigation. To manage the memristive coefficients in the model, the set-valued map and the differential inclusion theorem are applied to each real-valued component of the model. Two suitable feedback controllers are designed. We choose an appropriate Lyapunov function based on the Lyapunov stability principle. The controller parameters generate some inequalities, and the system with IE will achieve the required stability. At the end of the article, two suitable numerical examples are introduced to confirm our theoretical estimates.
225202
Ertong Wang, Bin Hu and Zhi-Hong Guan
Memristive neural networks are widely studied for rich dynamics, but amplitude dynamics and flexible oscillation control are still not well understood. First, a new locally active memristor is introduced, showing multistability and nonvolatility, and these properties are verified. Then, the memristor is embedded as an autapse in a Hopfield neural network to form a new memristive Hopfield neural network (MHNN). The MHNN dynamics are analyzed, and chaos is confirmed using Lyapunov exponents and phase portraits. Next, hybrid amplitude dynamics are demonstrated: by tuning memristor parameters, stimulus current, and initial states, the MHNN switches between periodic and chaotic oscillations and adjusts amplitudes over a wide range. Finally, an FPGA implementation is presented, and a medical image encryption scheme based on chaotic synchronization is designed, avoiding key transmission through the channel. Simulations show strong security performance, supporting the MHNN for secure medical image transmission.
225203
David Valenzuela and Alfredo Raya
We solve the Dirac equation on the two-dimensional sphere of radius
as an effective equation of motion of charge carriers in Buckminsterfullerene. By introducing the appropriate covariant derivatives including spin connections, we find the electronic states to be expressed in terms of Jacobi polynomial. We further construct the Ritus functions, corresponding to the eigenfuctions of the squared (curved) Dirac operator and split the curved spinors in terms of free flat–space spinors multiplied by (matrix) functions depending of the geometry of the sphere. These functions fulfill orthogonal and completeness relations and therefore, allow to diagonalize the Dirac propagator in curved momentum space in terms of a flat–space free propagator with a flat–space momentum whose components encode the quantum numbers induced by curvature. Charge and current densities are computed and compared with those of flat space as
. This framework can be extended to other curved spaces in a straightforward manner.
225204
Xiangjun Jiang and Yanxia Hu
This study presents a systematic Lie symmetry analysis of a time-fractional generalized Degasperis–Procesi (DP) equation with the Riemann–Liouville derivative, which effectively describes unidirectional shallow water wave propagation. By utilizing the fractional prolongation formula, the complete symmetry classification for the multi-parameter model, which encompasses several well-known wave equations as special cases, is derived. Based on the admitted infinitesimal generators, similarity reductions are constructed to transform the governing fractional partial differential equation into fractional or classical ordinary differential equations. A diverse set of exact invariant solutions, including Mittag–Leffler and hyperbolic function solutions, is explicitly obtained. Notably, for cases without closed-form expressions, convergent power series solutions characterized by a unified recurrence relation are provided. Furthermore, representative graphical illustrations are presented to visualize the qualitative and dynamical behaviors of the obtained solutions. These results provide a comprehensive framework for understanding the symmetry structures and analytical behaviors of the generalized DP equation family.
225205
Ruchi Kaur and Naman Taggar
The well known generalized exponential rational function (GERF) method has been used on various equations to obtain their analytic travelling wave solutions. This research work introduces an extension of the GERF technique, namely the logarithmic derivative GERF (LD-GERF) method and establishes its structural boundaries. Specifically, we demonstrate that while the LD-GERF ansatz algebraically reduces to the standard GERF framework when symmetric exponential parameters are used, using mutually distinct parameters ensures structural independence. Employing the traditional GERF method and newly proposed LD-GERF method, we obtain analytical travelling wave solutions of the
-dimensional Calogero–Bogoyavlenskii–Schiff (CBS) equation, an integrable higher-dimensional generalisation of the KdV-type equations describing nonlinear dispersive waves. By applying an auxiliary equation and symbolic computation through software Mathematica 14.3, a wide spectrum of closed-form dark, bright, multi-soliton solutions including hyperbolic, trigonometric and rational wave structures is obtained. The LD-GERF approach admits a more flexible ansatz and generates additional solution families for the given equation. The physical characteristics of the wave profiles derived from both the techniques are analysed to illustrate the nonlinear dynamics governed by the CBS model. The rich collection of novel solutions presented in this study strengthen the application of GERF and more specifically LD-GERF method for nonlinear evolution equations modelling real world phenomena.
225206
D Ojeda-Guillén, R D Mota and J C Vega
225207
Sherly K and P Veeresha
Air pollution remains one of the most serious threats to environmental sustainability and public health, with particulate matter
and
among the most hazardous pollutants. High levels of these particles are closely linked to respiratory and cardiovascular disorders, which greatly increase mortality rates worldwide. With population,
, and mortality due to
as important variables, a mathematical model is proposed in this study to examine the dynamics of air pollution and its effects on human health. To better represent the intricate and unpredictable nature of air pollution dynamics, the suggested model is examined under deterministic, fractional-order, and stochastic formulations. The Caputo derivative is used to add memory effects into the fractional-order model, while stochastic differential equations are used to account for environmental variability. The model’s well-posedness is proven, and the fractional-order system’s boundedness and stability are investigated. Asymptotic behavior and isoclines are used to examine the viability of equilibrium states. The Milstein scheme for the stochastic system and the Adams–Bashforth–Moulton approach for the fractional model are used in numerical simulations. Sensitivity analysis is carried out to assess the impact of model parameters. To improve predictive power, machine learning and time-series forecasting methods are combined, such as the random forest regressor and ARIMA model.
concentrations show varying but consistent trends over time, while population and pollution-related mortality continue to rise, according to the forecasted data. Both short-term fluctuations and the long-term dynamics of the system are successfully captured by the hybrid forecasting framework, which also increases prediction accuracy. All things considered, the suggested method offers a thorough analytical and computational framework for comprehending the relationship between
, air pollution, and health effects, providing insights that can help legislators create efficient pollution mitigation plans.
225208
N Bevan Arena Kharbithai, Ranchhaigiri Brahma and A K Sen
In this work, we investigate the spacetime geometry outside a static ellipsoidal body and study three important general relativistic effects in its gravitational field, namely the deflection of light, gravitational redshift and periastron shift. Since most existing analyses are based on spherical symmetry, they do not fully capture the influence of the geometric deformation of realistic gravitating bodies. Starting from the static ellipsoidal metric proposed by Brahma and Sen (2023 Gen. Relativ. Gravit55 24), we introduce suitable modifications and derive a revised line element that satisfies the vacuum Einstein field equations. Using this line element, we obtain the general expression for the bending angle of light based on the null-geodesic and Hamilton–Jacobi formalisms. Next we derive the corresponding expression for gravitational redshift and periastron shift. We further obtain the weak-field approximations of the three observables and show that they reduce to the standard Schwarzschild results in the spherical limit. A comparative study for the Sun and a pulsar PSR B1257+12, treated as test cases, indicates that the presence of ellipticity changes the values of the observables from their corresponding Schwarzschild cases. These results highlight the role of geometric deformation in precision studies of light propagation in non-spherical gravitational fields.
225209
Richard Kwame Ansah, Josephine Owusu-Sarfo, Kassim Tawiah and Charles Kwofie
We investigate a mean-field Ising model with simultaneous two-spin and five-spin interactions. Using a variational principle for the Gibbs free energy, we provide a complete characterization of the phase diagram and identify the coexistence curve separating polarized and unpolarized phases. We prove law of large numbers and central limit theorems for the magnetization away from criticality, establish non-Gaussian fluctuation limits at the critical point, and compute the associated critical exponents. In particular, we show that the addition of quintic interaction terms induces a discontinuous first-order phase transition, in contrast to the second-order behaviour of the classical Curie–Weiss model. Our results extend the framework of mean-field limit theorems for higher-order Ising models and highlight the role of five-body couplings in shaping collective phenomena.
225210
Priya Yadav, Nilam Dr and Abhishek Kumar
During an infectious disease outbreak, controlling transmission and managing new cases within a population are inherently challenging. These difficulties, however, can be reduced through vaccination, public awareness initiatives, and effective treatment strategies. In this study, we consider the population’s prior experience with previously encountered diseases and introduce a fractional-order, time-delayed epidemic model that incorporates a vaccinated population with an imperfect vaccine, memory effects, logistic growth of susceptibles, saturated incidence, and treatment rates. The model aims to capture the transmission dynamics of infection and identify potential control mechanisms. The time delay reflects the disease’s incubation period. The model is analyzed mathematically for two possible equilibria: the disease-free equilibrium (DFE) and the endemic equilibrium (EE). The critical threshold parameter, the basic reproduction number
, is derived, and the local stability of both the DFE and EE is examined with and without time delay. In addition, the potential occurrence of a Hopf bifurcation is investigated for varying fractional order
, (
). The analysis shows that a Hopf bifurcation arises when the time delay
exceeds a certain critical value. An explicit formula is further obtained to characterize the stability and direction of the periodic solutions emerging from the bifurcation point for fractional order
. A sensitivity analysis is also carried out with respect to both the basic reproduction number and the system’s state variables at the EE. Finally, numerical simulations are presented to support and illustrate the theoretical results.
225211
The following article is Open access
Thomas Oikonomou
We develop a formulation of particle mechanics in which the functional relation between force and kinetic energy is derived directly from the instantaneous (pointwise along the trajectory) conservation of mechanical energy
, rather than postulated through Newton’s second law or a variational principle. Starting from the condition
, we derive a generalized force law that does not assume a specific kinetic-energy function, momentum–velocity relation, or equation of motion. The resulting inertial response naturally decomposes into a component parallel to the acceleration, responsible for changes in kinetic energy, and a transverse component that preserves energy while altering the direction of motion. Imposing rotational equivariance constrains the geometric structure of the force law, while the relativity principle between inertial reference frames further restricts its admissible realizations. In strictly one-dimensional motion, inertial frame equivalence, supplemented by a set of five structural properties, implies invariance of the total force under inertial boosts; together with local energy conservation, this uniquely fixes the functional form of kinetic energy and momentum. Galilean invariance selects the Newtonian expressions, whereas Lorentz invariance yields the relativistic ones. The framework unifies conservative and non-conservative (yet non-dissipative, e.g. the magnetic Lorentz force) dynamics at the single-particle level and clarifies the precise conditions under which energy-based and variational formulations of mechanics are dynamically equivalent. Newtonian and relativistic mechanics thus emerge as symmetry-selected realizations of a common energy-conserving force-energy structure. The analysis further shows that the standard Lagrangian form
is consistent with, and implicitly presupposes, Galilean relativity.
225212
Wenhui Yan, Aojie Xie, Can Huang, Yifan Sun and Junwei Zhou
To further improve the accuracy of numerical simulations for turbulent boundary layer flows, this study introduces a hybrid turbulence model for turbulent boundary layer flows. This model is based on the Partial Averaged Fluctuation Velocity (PAFV) and k-ω turbulence models and features only one empirical coefficient. Leveraging the OpenFOAM open-source software platform, the development of the proposed hybrid turbulence model is carried out. Numerical simulations are performed for turbulent boundary-layer flow over a flat plate with zero pressure gradient. This analysis yields insights into the mean velocity, PAFV distributions, and allows for a comparative study of calculated and experimental values pertaining to the logarithmic law, velocity defect law, friction coefficient, and turbulent kinetic energy of the turbulent boundary layer. In comparison to traditional models, this model offers a more comprehensive velocity distribution near the viscous sublayer, with the predicted velocity being approximately 6% higher than values from conventional models. Numerical simulations present explicit distributions of the PAFV vector within the flat-plate turbulent boundary layer, indicating the PAFV’s utility as a physically interpretable turbulence velocity scale. The computed wall friction coefficient Cf deviates by less than 1.59% from theoretical correlations under high-Reynolds-number conditions. Furthermore, the predicted turbulent kinetic energy and Eddy Kinematic Viscosity exhibit consistent distribution trends with established theoretical analyses. Experimental measurements of turbulent fluctuation velocity suggest that the measured fluctuation intensity is roughly twice the predicted PAFV magnitude, thereby supporting the use of the empirical coefficient C ≈ 2.0. These findings quantitatively validate the efficacy of the proposed PAFVH-ω model in forecasting flat-plate turbulent boundary layer flows and introduce a fresh framework for incorporating first-order fluctuation data into RANS-based turbulence modeling.
225213
The following article is Open access
T Thiemann and A M Rodriguez Zarate
Interesting quantum integrable models are rare and one often has to resort to approximation methods. One of these is the Rayleigh Ritz method which under certain circumstances allows to approximately compute the lowest energy eigenstate (or ground state) of a given Hamiltonian whose pure point spectrum is bounded from below. The quality of such approximations can then be tested numerically or sometimes by abstract arguments. However, the numerical test is limited by computing power. In order to perform a rigorous test, one would need to have at one’s disposal 1. a physically interesting model that is 2. solvable to sufficient extent in order that 3. the exact ground state is known in closed form. In this contribution we show that certain anharmonic potentials of the Mexican hat type belong to this class of models. The corresponding Schrödinger type Hamiltonian can be considered as a crude quantum mechanical toy model Hamiltonian for the Higgs field in the standard model of elementary particle physics.
225214
Linan Guan, Qianqian Zheng and Jianwei Shen
In this paper, we construct a novel network-organized Hindmarsh-Rose (HR) model incorporating delayed active and passive transport to investigate the influence of network structure and delay on Turing instability, firing distribution, and pattern formation. We derive Turing instability conditions for three interacting species, highlighting how the distribution of eigenvalues governs Turing instability and subsequent pattern formation. Additionally, we explore delay-induced Hopf and Turing bifurcations and show that, in the parameter regime considered here, the principal crossing curve is selected by the mode with the smallest admissible critical delay. Furthermore, our numerical results indicate that, for sufficiently strong transport imbalance and delay, a large proportion of neurons may become active simultaneously, and the model may then enter a network-wide high-activity or loss-of-boundedness regime. These theoretical advancements offer deeper insights into the interplay between time delays and network structures in shaping Turing instability and pattern dynamics, presenting significant opportunities for applied research, particularly in understanding neuronal activity.
225215
Lili Zhou, Zeliang Chen and Fei Tan
In nature, the dependency strength among interdependent edges exhibits significant variation. When one node fails, its dependent node at the other end may only lose partial connections, which is a phenomenon known as weak dependency. As the fact that the
-core structure has significant advantages in identifying weak links within networks, the study upon two-layer weakly dependent networks with
-core decomposition can supply some valuable guidance in enhancing the robustness of real networks. For this study, we first calculate the remaining
-core size of network after being attacked under varying failure probabilities, and then systematically investigate the comprehensive impact of different
-core levels and weak interdependence strengths on network robustness. It is observed that with an increase of failure probability, the dependency relationships become more pronounced, and the robustness for the entire network becomes gradually decreased. Meanwhile, under the same failure probability, with growth of the hierarchy for
-core, the robustness of network will be gradually decreased as well. Eventually, one effective optimization strategy for enhancing the robustness of networks is supplied by adjusting the dependency strength between core and non-core nodes. The obtained results are verified through ER–ER and SF–SF networks, which indicate that extracting the
-core structure in weakly dependent networks can significantly improve their anti-attack abilities.
225216
Chanhyuk Choi, Seunghyun Lee, Sungjong No and Seungsang Oh
Polygonal models of knotted filaments are widely used in physics, for example as coarse-grained descriptions of polymers and DNA, as well as vortex or magnetic flux tubes and elastic rods. In such systems, the local geometry is constrained either by bending-energy costs that penalize sharp turns or by steric effects (thickness and self-avoidance) that prevent very tight bending. Motivated by these considerations, we introduce an angle-constrained polygonal complexity for knots. An obtuse stick presentation of a knot is a polygonal embedding in
in which every interior angle between consecutive sticks is at least
, and the obtuse stick number
is the minimum number of sticks among all such presentations of
. Using arc presentations and known bounds relating the arc index
to the crossing number
, we obtain general crossing-number upper bounds: for any nontrivial knot
,
, and for non-alternating prime knots,
. For the class of
-bridge knots, we build on a previously established height-controlled stick construction and convert it into an obtuse presentation by adding only a few extra sticks, thereby obtaining the sharper bound
. On the lower-bound side, we use total curvature and the Fáry–Milnor theorem to show that every nontrivial knot satisfies
; consequently, the trefoil has
. These results connect arc index, crossing number, and curvature-based obstructions, and show that obtuse angle constraints lead to a distinct and computable notion of polygonal knot complexity relevant to physical filament models.
225217
The following article is Open access
Mahmut Modanli and Sümeyye Coşkun
In this article, the application of neural network-based methods for solving time-space fractional-order elliptic partial differential equations is presented. In order to solve the time-space fractional elliptic partial differential equation as accurately as possible, a non-traditional numerical approach, namely the neural network method (NNM), is proposed. Neural networks have been actively used in recent years to solve partial differential equations and to approximate their solutions. In most cases, these networks provide an approximate function representing the solution to the differential equation. The neural network learns the fractional orders of the derivatives, thereby increasing the accuracy of the solution. In computing fractional derivatives, neural networks have more flexible and powerful modeling capabilities compared to traditional methods. The proposed approach employs shifted Legendre polynomials and Caputo derivatives. The NNM is applied to the elliptic partial differential equation for fractional-order values of
and
. The Adam optimization algorithm is used in training the deep network due to its efficiency. The neural network solutions corresponding to each fractional-order value are compared with the analytical solution. The results are supported by tables, error metrics, and graphical illustrations (line plots and contour plots), showing good agreement with the analytical solutions. In the proposed NNM, it is observed that as the value of
approaches 2, the approximate solution converges to the analytical solution.
Particles, fields and nuclear physics
225301
F Azari and M Haghighat
We investigate the phenomenology of the Standard Model extended by a real gauge-singlet scalar field, focusing on exotic Higgs decay channels. For a light scalar mass in the range 0 < mϕ < 40 GeV, the Higgs boson can decay to both two and three scalar final states. We derive analytical expressions for these decay rates and impose a global constraint on the model parameters by requiring that their sum does not exceed the total Standard Model Higgs boson decay width. This requirement translates into a fourth-order inequality with respect to the singlet vacuum expectation value, vϕ. We demonstrate that satisfying this inequality imposes an upper bound of
across the entire mass range, providing a complementary constraint to existing direct search limits. Utilizing stronger independent constraints on the mixing (e.g.,
), we then predict upper bounds on the individual exotic decay rates as a function of mϕ as Γh→ϕϕ < 0.06 MeV and Γh→ϕϕϕ < 5 × 10−6 MeV, respectively.
225302
Rungroj Jintamethasawat, Jia-Yi Chia, Weerawat Pornroongruengchok, Sarinrat Wonglee, Piyanud Thongjerm, Sutasinee Kotayee and Kamontip Ploykrachang
Terahertz (THz), x-ray, and neutron imaging techniques have demonstrated strong potential in several non-destructive testing (NDT) applications. While the characteristics of each modality have been well studied, direct comparisons across these techniques remained limited. This work presents a systematic comparison of attenuation behavior for ten common solid materials spanning a broad range of atomic numbers span under three radiation types. Attenuation coefficients were calculated and statistically validated using significance testing and ANOVA to evaluate both their reliability and the influence of imaging parameters. The results reveal distinct and complementary contrast mechanisms among the modalities. Neutron radiation exhibits strong attenuation in hydrogen-rich materials (e.g. PVC ≈ 0.128 mm−1) and relatively low attenuation in metals (e.g. aluminum ≈ 0.010 mm−1). In contrast, x-ray imaging (59.5 keV) shows higher attenuation in metals (e.g. copper ≈ 1.283 mm−1) and glass (≈ 0.063 mm−1) compared to polymers (e.g. HDPE ≈ 0.018 mm−1). THz imaging demonstrated strong attenuation in polar polymers (e.g. PVC ≈ 0.196 mm−1 at 1.6 THz) and low attenuation in non-polar materials such as HDPE (≈ 0.069 mm−1), while metals are effectively opaque due to the skin effect, leading to non-meaningful attenuation estimates. The analysis further shows that attenuation coefficients depend significantly on x-ray source energy and THz frequency. Reconstructed 2D images are consistent with the attenuation trends and highlight the complementary nature of the three imaging modalities. This study establishes a quantitative reference dataset across multiple spectral regimes and provides physical insight into modality-dependent contrast mechanisms. The findings support the selection and integration of imaging techniques for advanced multi-modal NDT applications.
225303
Sohrab Aghaei, Alireza Chenaghlou and Rouhiyeh Arefi
Relativistic density functional theory (RDFT) provides a powerful framework for studying the electronic structure in systems where relativistic effects are significant. Within this framework, we develop a mapped Fourier–grid method to solve the Dirac–Morse equation, where all many-body and external interactions are included in an effective Morse potential. The approach yields stable and convergent positive- and negative-energy spectra and accurately solves the ground and first excited radial spinor components for diatomic molecules, for instance, SiF+ and CP, underlining the method’s effectiveness for relativistic molecular modeling.
Atomic and molecular physics
225401
Jingcao Wang and Zhigang Sun
225402
The following article is Open access
Laxmi priya Meher, Vipul Kumar, Diptimayee Biswal, M K Verma, D R Rathod and Asawari D Rath
Saturation technique is employed to measure photo-excitation cross-sections of Lu I transitions using resonance ionization mass spectroscopy. The cross-sections of multiple hyperfine components of the spectral line at 573.65 nm are determined for both 175Lu and 176Lu. Using these values, the excitation cross-section of the fine structure transition (at 573.65 nm) is explicitly determined experimentally for the first time. The experimental strategy is validated by deriving the cross-section indirectly from literature data as well as the experimentally measured radiative life time of the upper energy level of this transition using pump-probe technique. Further, the strategy is employed to determine hitherto unknown fine structure photo-excitation cross-section of the intermediate transition at 642.53 nm and radiative life time of its upper energy level.
Electromagnetism, optics and photonics
225501
Xuanqi Zhang, Zhiqiang Li, Yibin Gong, Tingxin Wang, Miaomiao Zhou, Yuanhao Huang, Jiayun Wang, Yinuo Cheng and Zeng Qu
In the field of terahertz (THz) waveband information security, conventional devices face limitations due to their fixed electromagnetic responses, making it difficult to meet the demands for dynamic encryption and multifunctional integration. This study proposes a reconfigurable reflective metasurface that integrates phase-encoded encryption with a multi-parameter ‘temperature-polarization’ key mechanism. Leveraging the metal–insulator transition (MIT) of vanadium dioxide (VO2), we realize four independent holographic channels in the 0.8 THz band by coordinating orthogonal x/y linear polarizations with the material’s phase transition. An iterative Gerchberg–Saxton (GS) algorithm is employed to encode target information into phase distributions bound to specific hardware-level keys. Compared with traditional single-parameter metasurfaces, the proposed design utilizes the global thermal control of VO2 and polarization multiplexing to significantly expand the key space and information isolation. This approach provides a new paradigm for THz information security that combines dynamic functionality with enhanced physical-layer encryption.
225502
Dhanashree Chemate, Abhishek Singh, Ruturaj Puranik, Utkarsh Pandey, Dipti Gupta, Siddhartha P Duttagupta and Shriganesh S Prabhu
A large-area interdigitated photoconductive antenna (i-PCA) for terahertz (THz) emission with a novel metal-insulator-semiconductor interface is designed with the aim of developing compact and scalable THz devices. The photoconductive material is an amorphous germanium (Ge) film deposited using DC magnetron sputtering. The antenna electrodes are composed of gold-germanium (AuGe). With the integration of a silicon dioxide (SiO2) layer that acts as an electrical mask on alternate active areas, we present a simple approach to fabricate a large-area i-PCA. Along with a simplified fabrication compared to other existing designs, our approach increases the electrical robustness of the emitter and reduces the inactive gap area on the device. The i-PCA is capable of THz emission up to 2.5 THz and 36 dB signal-to-noise ratio, and is promising for applications in CMOS technologies.
225503
Mingguang Shan, Zhibo Xu, Zhang Jing, Zhi Zhong and Lei Liu
To meet the demand for high-precision and high-efficiency three-dimensional topography measurement of micro-nano structures in high-end equipment manufacturing, dual-wavelength digital holography (dwDH) and its related technologies have developed rapidly. However, its phase retrieval algorithms still suffer from problems such as complex procedures and large computation loads. Aiming at the problem that phase retrieval speed and precision cannot be balanced in off-axis dwDH, this paper proposes a fast and high-precision direct retrieval algorithm for the differential phase, which enables direct and rapid retrieval of differential phase for off-axis dwDH. First, the phase information contained in the cross-correlation spectrums corresponding to each wavelength in the off-axis dwDH is analyzed. Then, the numerical relationship between the cross-correlation spectrums of the two wavelengths after modulation intensity normalization is clarified. Furthermore, phase information can be directly extracted with high speed and precision by spectrum superposition and complex amplitude division. Finally, numerical simulations and experimental results verify the feasibility and effectiveness of the proposed method.
225504
Wenqi Chen, Hu Wei, Jiale Lv and Xiaofei Xu
This work studies functional planar bowtie-metasurfaces (BMs) and demonstrates their applications in miniaturized microwave microstrip antennas (MSAs). By utilizing the S-parameter retrieval method, the BMs are featured to have an increased effective refractive-index (neff), compared to the conventional integrated structure. This enhanced neff is particularly useful to compact an MSA, which is further used to predict the BM-MSA’s resonant frequency. Results are found in good agreement with the full-wave calculations of probe-fed antenna models. In particular, the size-reduction effects for the BM-MSA are discussed by varying the metasurface parameters. To validate the antenna performances, a specific BM-MSA sample is fabricated using a low-dielectric-constant substrate with εr = 2.2. Experimental results reveal that the realistic BM-MSA sample has a patch length of 21 mm, but resonates at 3.54 GHz (the guided wavelength λg is 57.14 mm). Its electrical length is only 0.368λg, which is beyond the 0.5λg limitation for a classical MSA. Despite of the small patch, the BM-MSA has an acceptable −10 dB bandwidth of 115 MHz and high antenna gain of 7.5 dBi, making it well meeting the requirements of wireless communications at the 3.5 GHz band.
225505
Hassan Sani Abubakar, Lu-Bo- Jing and Xiao Ding
This work presents the design of a single-layer substrate, dual-band frequency-selective surface (FSS) with a bandpass response. The proposed FSS consists of a top-layer meandered cross structure enclosed by an inductive wire grid, and a bottom-layer square metal patch surrounded by another metal grid, with the two layers separated by a dielectric spacer. The operating principle of the suggested FSS is explained by an equivalent circuit model, demonstrating strong performance, including angular stability up to 80° and low insertion losses of 0.39 dB and 0.19 dB across the two bands. A wide bandwidth of 3.60–6.16 GHz and 7.52–10.82 GHz under 3 dB bandwidth criterion in the two passbands were achieved, with a fractional bandwidth of 52.45% and 35.98%, respectively. The strong agreement between the simulated and measured results confirms the suitability of the FSS for use in stealth communication and radar systems.
225506
Chao Gao, Jieying Zhang, You Li, Xunjun He and Ying Zhang
This paper proposes a polarization-frequency-space triple-multiplexed holographic metasurface for terahertz (THz) encrypted communication, enabling multi-physical decoupling and independent wavefront control. Using polarization-frequency multiplexing, the orthogonal frequency responses of central cross and peripheral L-shaped resonators decouple linearly polarized (LP) waves at two frequencies, constructing four channels. Spatial multiplexing adds two more channels under opposite incident directions. When x-LP and y-LP waves are incident along ±z directions, six holographic images are generated via the Gerchberg–Saxton algorithm. Under 45°-LP incidence, three additional images are produced through vector superposition of orthogonal polarizations. All images maintain high fidelity over wide ranges of frequency, focal length, and incident angle. On this basis, a hierarchical encryption framework couples the metasurface’s channel-specific physical responses with a digital encoding layer, enabling encrypted communication of arbitrary images. This design overcomes traditional bottlenecks of low channel density, high crosstalk, and single-layer encryption, providing a feasible path for high-capacity, high-security THz communication and highlighting the potential of metasurface wavefront engineering for next-generation secure communication.
225507
Xiaodan Huang, Yuexia Qian and Guojian Shao
A structure of the TiO2 nanorod array & an Al2O3 layer on Si substrates is presented to achieve broadband high transmission and low reflection. We show numerically that the average reflection of this structure under normal incidence can reach 3.4%, and the average transmission can reach 96.3% in the 400–1100 nm range (with TiO2 nanorods’ diameter of 240 nm, TiO2 nanorods’ height of 100 nm, Al2O3 layer’s height of 50 nm, and array period of 320 nm), due to the synergistic effect between the forward scattering of the TiO2 nanorods and the antireflection characteristics of the Al2O3 layer. The geometric parameters (including the diameters and heights of the TiO2 nanorods, the height of the Al2O3 layer, and the period of the array) are shown to substantially influence the optical performance. Besides, the simulated results show that this structure exhibits substantially reduced reflectivity and considerably high transmittance across the entire incident angle range up to 50°. This work presents a practical strategy for the omnidirectional, broadband reduction of surface reflection and the enhancement of light absorption in silicon-based solar cells.
225508
Ming Peng
The planning of base stations for mine mobile communication, Internet of Things (IoT) networks, and precise positioning systems relies fundamentally on accurate path loss prediction based on physical propagation mechanisms. However, existing statistical channel models fail to adequately account for the unique physical characteristics of underground spaces. To address this limitation, we propose a novel statistical modeling method for mine path loss based on path loss exponent breakpoints, which systematically incorporates key underground-specific physical factors, including frequency, distance, cross-sectional area, curvature, branching, and belt conveyors. An extensive physical analysis of the field measurement data reveals several key wireless channel characteristics in underground mines. The results show that (1) the frequency corresponding to the path loss breakpoint is negatively correlated with the cross-sectional area, and the presence of a belt conveyor increases this frequency in straight roadways; (2) the path loss exponent in fully mechanized longwall mining faces, curved roadways, and branched roadways exceeds that of free space due to signal attenuation caused by complex mining equipment and structural irregularities in the physical environment; (3) belt conveyors, roadway branching, and curvature all increase path loss, and in a branched roadway, path loss is greater when signals are transmitted from the main roadway than when they are transmitted from a branch roadway; (4) the proposed model is applicable to both line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios from a physical propagation perspective, and achieves an average mean absolute error of 3.7 dB, outperforming conventional models by 2.7–7.0 dB; and (5) this high accuracy enables reliable path loss estimation, thereby supporting effective link budgeting, coverage planning, and optimal deployment of base stations in underground mines.
225509
Mingyong Zhuang, Xinbo Chen and Jianyang Zhou
Holographic metasurfaces have demonstrated broad application prospects in beamforming, energy focusing, and holographic imaging. However, existing transmissive holographic metasurfaces still face challenges in achieving broadband operation and polarization-insensitive performance. In particular, metasurfaces based on a single dielectric layer are inherently limited in operating bandwidth, whereas multilayer dielectric configurations inevitably introduce increased structural complexity and reduced design efficiency. To address these issues, this paper proposes a broadband and polarization-insensitive metasurface structure which introduces a via-loaded configuration between the upper and lower metal patches. The metasurface effectively expanded the operating bandwidth while maintained high transmission efficiency and enhanced polarization stability. Based on this structure, a Frequency-Wise Transformer (FWT) is developed to learn the nonlinear mapping between the structure parameters of meta-atoms and corresponding electromagnetic responses, leveraging the global modeling capability of Transformer neural networks. In the design process, the FWT is first trained to achieve fast and accurate prediction of electromagnetic responses. Subsequently, an evolutionary optimization strategy is employed to globally optimize the meta-atom parameters, and the metasurface array is constructed according to the holographic imaging theory. Numerical simulations verify that the proposed FWT can accurately predict electromagnetic responses at the millisecond level, which significantly reduces the computational time and cost. Moreover, the designed metasurface exhibits excellent polarization insensitivity over a wide operating bandwidth and successfully generates clear and stable holographic field intensity distributions at the target plane. Overall, the proposed design framework effectively integrates structural innovation with artificial intelligence, achieving a favorable balance among structural simplicity, design efficiency, and electromagnetic performance.
225510
Lu-Bo Jing, Lin-Man Zhang and Xiao Ding
In this paper, a multifunctional wideband reconfigurable frequency selective surface (RFSS) integrating tunable transmission, broadband absorption, total reflection, and continuous radar cross section (RCS) regulation is proposed. To address the insertion loss (IL) challenge in cascaded active structures, a capacitive pseudo-transparency mechanism is introduced. By leveraging the parasitic parameters of the PIN diodes, the switchable layer is engineered to be quasi-transparent in the transmission band, effectively minimizing its loading effect. Both simulation and measurement results demonstrate that the proposed RFSS achieves agile switching among distinct operating modes. In the transmission mode, it exhibits a continuous passband tuning range from 2.18 to 4.10 GHz with an IL below 3 dB. In the reflection mode, total reflection is achieved across 2–8 GHz. In the absorption mode, an absorptivity exceeding 90% is maintained over 4.29–9.53 GHz. Furthermore, continuous RCS regulation is realized by adjusting the bias voltage, with the reflectivity amplitude being continuously tuned and a maximum modulation depth of about 10 dB being achieved. The proposed design methodology and operating mechanisms are validated, confirming the structure’s suitability for dynamic electromagnetic environments requiring both spectral filtering and flexible scattering signature control.
225511
Sandip Das
225512
Qian Hu, Ziyang Yang, Zebin Chen, Zeya Zhang, Lihong Lin, Yongnan Lin, Li-An Ma, Hongxiang Chen, Qianting Wang and Xiaoyun Ye
With the rapid development of modern electronic devices and communication technologies, electromagnetic interference has become increasingly prominent. Herein, a hierarchical hollow microsphere (h-MnO@NC@MoS2) was successfully constructed through a sequential templating method combined with an interfacial engineering strategy. The microsphere is composed of a manganese oxide (MnO) core, a conductive N-doped carbon (NC) interlayer, and a porous molybdenum disulfide (MoS2) outer shell, aiming to achieve high-performance microwave absorption. In this design, the NC interlayer provides a continuous conductive pathway for conduction loss, while the porous MoS2 shell contributes abundant heterointerfaces for polarization relaxation. This deliberate design enables an outstanding minimum reflection loss of −70.33 dB at a thickness of 1.48 mm and an effective absorption bandwidth value of 5.2 GHz at a thickness of 1.78 mm. The superior performance originates from the synergistic enhancement of impedance matching and multiple attenuation mechanisms, including conduction loss, interfacial polarization, and multiple scattering. This work further confirms the effectiveness of multi-interface design in developing advanced microwave absorbers and provides a valuable reference for the design and preparation of high-performance microwave absorbing materials.
225513
Gali Madhavi, Chakradhar Adupa, Ramkumar Natarajan and Anil Kumar Pathakamuri
An optically gated vertical SiGe point-tunneling tunnel field-effect transistor is proposed and systematically investigated for low-power near-infrared (NIR) photodetection applications. The device exploits a silicon optical gate combined with a Si0.7Ge0.3 source to enhance optical absorption and strengthen electrostatic control at the tunneling junction. Under NIR illumination, photogenerated carriers in the optical gate induce an additional gate potential, which significantly narrows the tunneling barrier and amplifies band-to-band tunneling through a VOP-assisted point-tunneling mechanism. Comprehensive TCAD simulations demonstrate pronounced wavelength-dependent photoresponse in the 750–1050 nm range, with a peak sensitivity of approximately 8.9 × 10⁴ at
V and a maximum signal-to-noise ratio of ∼100 dB at 750 nm. The proposed device achieves a responsivity of up to 4.0 × 103 A W−1 and an external quantum efficiency of ∼2.0 × 103, indicating strong internal gain enabled by tunneling-dominated transport. Optical power, temperature, and source mole-fraction analyses confirm robust and stable operation, with Si0.7Ge0.3 identified as the optimal source composition due to its balanced trade-off between enhanced tunneling and suppressed dark current. Benchmarking against recently reported TFET-based photodetectors highlights the superior sensitivity, signal integrity, and NIR detection capability of the proposed architecture, making it a promising candidate for ultra-low-power optical sensing applications.
Plasma physics and fusion
225601
Wei Zhang and Hui Chen
Ion holes have been frequently observed in space and astrophysical environments. In this article, the Bernstein–Greene–Kruskal (BGK) method was employed to investigate the dynamic characteristics of ion holes where electrons follow the non-extensive distribution. Based on the BGK method, we obtained not only the trapped ion distribution function but also the relationship between electric potential width and amplitude. Analysis results reveal the following: as the non-extensive parameter q increases, the ion holes deepen, their stable region shrinks, and the value of trapped ion distribution function decreases. This work provides deeper insight into the dynamic characteristics of ion holes and their dependence on non-thermal electron distributions.
Condensed matter and materials physics
225901
M A Perdomo-Gutiérrez, J Prada-Suarez, X Rojas-Herrera, J Barba-Ortega and C A Aguirre
We simulate vortex dynamics in a mesoscopic superconducting film with a polygonal defect by solving the time-dependent Ginzburg–Landau nonlinear equations. The study probes three regimes: (i) current-driven kinematic vortices, (ii) Abrikosov vortices under an external magnetic field, and (iii) the simultaneous application of transport current and magnetic field. The defect morphology ranges from circular holes to regular polygonal shapes. Key results include a scaling law, Jc ∝ r2, for circular defects, a reduction of the critical current and enhanced current crowding for triangular defects, and geometry-dependent resistive states. Both the size and shape of the defect modify the first vortex-penetration field and vortex trapping properties, leading to the emergence of a paramagnetic Meissner effect for sufficiently large circular holes. In the mixed regime, vortex nucleation hotpots at sharp polygonal vertices couple with current-driven instabilities to govern dissipation,suggesting geometry-based design rules for controlling vortex behavior in superconducting devices.
225902
GuoWei Zhang and XiaoPeng Yang
Steel materials serve as core structural components in electric power systems, with Fe–C alloys as their fundamental matrix. Microvoids affect the mechanical properties of Fe–C alloys. The Fe–C alloy systems with a carbon content of 0.2wt% are established using the molecular dynamics method via LAMMPS. This study explores the influences of void size, position, and quantity on the mechanical stress responses in 2D nanosheets and 3D nanocubes. For 2D nanosheets, voids induce early material failure, eliminate the stress peak, and reduce maximum stress, with the stress extreme value decreasing as void size increases. For 3D nanocubes, small voids maintain a stress state similar to the defect free system, while yielding plateau becomes less pronounced when the void radius reaches triple lattice constant. Void position slightly affects the initial elastic stage but significantly influences behavior near the stress peak. Systems with double voids exhibit similar peak stresses to single void ones, whereas void spacing and central void location strongly govern stress evolution and elastic stage degradation. This work provides a theoretical basis for performance optimization, defect control, and failure prevention of Fe–C alloys used in transmission tower manufacturing and service.
225903
Jing Li and Jing Su
Utilizing first-principles density functional theory, we investigate the effects of electron doping on ZnGeO3, a LiNbO3-type ferroelectric material. We first investigate electron-doped ZnGeO3 using the background charge method, and then investigate the introduction of oxygen vacancies into the ZnGeO3 supercell. Both calculation methods demonstrate that electron doping does not suppress cation displacement in ZnGeO3 but rather enhances it. ZnGeO3 exhibits excellent polar displacements stability. Notably, ZnGeO3 exhibits an isolated s conduction band. These characteristics open new possibilities for the application of ZnGeO3-doped ferroelectrics in devices and also open up new avenues for the study of LiNbO3-type ferroelectric materials.
225904
Xuan Chen, Mingyuan Tian, Shaopeng Qin, Liangzhu Ma, Canqi Li and Deshun Yin
4D printing extends additive manufacturing by incorporating smart materials, showing transformative potential across wide-ranging applications. Understanding and controlling both the flow-dominated behavior in the printing process and the deformation-dominated behavior in the programming process are crucial. However, current studies tend to address the printing and programming stages separately rather than within a unified framework. To achieve this aim, establishing a unified model for the complex rheological behaviors across stages is an important step. To this end, we develop a variable-order fractional derivative model, enabling the transformation between the flow- and deformation-dominated behaviors by varying the fractional order. The model effectively captures linear viscoelasticity, shear-rate-dependent viscosity, and the stress overshoot phenomenon in flow-dominated scenarios, as well as various recovery modes and the modulus–temperature trend in deformation-dominated scenarios. Additionally, the model shows some predictive capability for dual-shape recovery. The two fractional orders involved are well defined, where
and
reflect the material state transition associated with the programming process and the microstructural evolution related to the printing process, respectively. The developed model achieves a favorable balance among simplicity, accuracy, and physical consistency, showing potential to contribute to both practical applications and fundamental understanding.
225905
Hao Xu, Linhua Xu, Gaige Zheng, Wenjian Kuang, Zhaolou Cao, Jinhua Li and Fenglin Xian
Gallium oxide (Ga2O3) has emerged as a promising ultra-wide bandgap semiconductor for next-generation high-power electronics and solar-blind ultraviolet photodetection. However, achieving high-quality, large-area thin films through cost-effective methods and tailoring their electronic properties remain significant challenges. In this work, wafer-scale undoped and chromium (Cr)-doped β-Ga₂O₃ thin films were successfully synthesized on 2 inch sapphire substrates using a low-cost, non-vacuum sol-gel spin-coating method. The influence of annealing temperature and Cr doping on the structural and optical properties was systematically investigated. The elemental and structural analyzes confirmed the formation of the monoclinic β-phase at annealing temperatures of 600 °C and 700 °C, with Cr ions effectively incorporated into the Ga₂O₃ lattice at Ga substitutional sites. Optical characterization revealed that all films exhibit high transparency exceeding 90% in the 300–1100 nm range. Increasing annealing temperature sharpened the absorption edge and induced a red shift, reducing the optical band gap from 5.00 eV (400 °C) to 4.93 eV (700 °C). Cr doping further decreased the band gap to 4.85 eV and enhanced absorption in the visible region. Theoretical calculations elucidated that Cr3+ ions and oxygen vacancies introduce localized mid-gap states, providing alternative transition pathways that dominate the sub-bandgap excitations and drive the observed spectral redshift. The dielectric function and absorption spectra from density functional theory align with experimental trends. These findings establish the sol-gel technique as a viable industrial-scale alternative for semiconductor engineering and provide critical insights into bandgap tailoring via transition metal doping and defect management.
225906
Wangbing Xiong, Junheng Pan, Zhimin Ma, Hao Shi, Xinglong Lin, Xiaoma Tao, Yifang Ouyang, Yulu Zhou and Xiaoming Mo
Halide perovskite single crystals (SCs) are promising materials for producing high-performance ultraviolet (UV) photodetectors (PDs) because of their excellent optoelectronic properties and low cost. However, conventional metal-semiconductor-metal (MSM) configuration used frequently in perovskite single-crystal UV PDs is limited by high dark currents arising from the external bias necessary to overcome its near-flat energy bands. In this work, unlike the MSM structure, vertical p–i–n heterojunction UV PDs based on high-quality FAPbI3 SCs were constructed via a solvent-assisted direct bonding strategy involving in-situ recrystallization. Their photoresponse characteristics were tested under 254 nm UV irradiation. Replacing the silver electrode with an aluminum electrode significantly improved the PD’s performance, yielding a 44% increase in responsivity and reductions of 13% and 17% in rise and fall times, respectively, owing to better energy level alignment and reduced charge extraction barriers. The optimized UV PD achieved a responsivity of 30.66 mA W−1 and a specific detectivity of 4.43 × 109 Jones, respectively. Finally, the high-sensitivity UV PD was demonstrated feasibly in a single-pixel imaging system, verifying the spatial uniformity of the bonded interface. Our work provides a facile integration strategy for FAPbI3 SCs in heterostructured UV detection and unlocks the potential of narrow bandgap perovskites in integrated UV photodetection.
225907
The following article is Open access
Ramazan Karakuzu, Batuhan Abiş and Mehmet Korkmaz
The fast-expanding glass fiber and polymer composite industries pose risks to the environment and nature. It is difficult to recycle glass fiber in nature, which directs producers to find more sustainable solutions. At this point, man-made/natural fiber hybridization methods have emerged as a sustainable way. Furthermore, the addition of nanoparticles is another significant method to obtain sustainable composites with compatible mechanical properties. In the previous study, the best hybridization method was determined to obtain a composite with more sustainable and better mechanical properties. In this study, the mechanical properties of the flax/E-glass intra-ply hybrid composite were further improved by adding nanoparticles. The graphene and TiO2 added intra-ply hybrid composites were developed and were tested under the tensile, compressive, in-plane shear, and quasi-static indentation loads. Wt. 1% TiO2 showed the best performance and significantly improved the tensile modulus, compressive strength, shear modulus, and absorbed energy of nanocomposites at 0.61%, 18.36%, 21.63%, and 11.75%, respectively.
225908
Yafeng Hao, Lizhi Dang, Tengteng Li, Cheng Lei and Ting Liang
Simplified ZnS nanoparticles/FTO structure has been constructed by successive ionic layer adsorption and reaction (SILAR) process. Based on photoelectrochemical (PEC)-type photodetector, self-powered photoresponse characteristics were observed at 0 V vs Ag/AgCl. The maximum responsivity is ∼7 mA W−1 at 265 nm and ∼6 mA W−1 at 300 nm with the fastest decay time of ∼0.016 s (265 nm) and ∼0.015 s (300 nm) for rise time, and ∼0.012 s (265 nm) and ∼0.011 s (300 nm) for decay time through the investigation of power intensity-dependent photoresponse. Due to the simple design without interface influence of other heterojunctions, the direct collection of photogenerated carriers in ZnS nanoparticles by FTO is in a much faster speed, showing the fastest self-powered response speed among the ZnS-based heterojunction photodetectors. Besides, fast carrier transfer time across electrolyte, and accelerated electrochemical reaction and fast carrier recombination by the assistance of defects also contributes to the fast response. In spite of the further improvement of responsivity demanded, the SILA-synthesized self-powered ZnS nanoparticles/FTO PEC-type photodetector herein shows a simple and efficient way for further fast-speed PEC applications.
225909
Gennady Poletaev, Alexander Sitnikov, Yuriy Bebikhov and Alexander Semenov
Using molecular dynamics simulation, we investigated the effect of the average grain size in a nanocrystalline titanium nanoparticle on the intensity of its dissolution in aluminum at different temperatures. For comparison, titanium nanoparticles with single-crystal and amorphous structures were also considered. Additionally, the stability of the nanocrystalline structure of nanoparticles was investigated as a function of temperature and grain size. It is shown that the intensity of recrystallization and structural changes, which lead to a decrease in the average potential energy of atoms in the titanium nanoparticle, increases with decreasing average grain size and increasing temperature. Accordingly, kinetic energy is released, which contributes to the acceleration of mutual diffusion of the components. The work also demonstrates that the grain size in the nanocrystalline titanium particle significantly affects the intensity of interdiffusion in the system under study. Grain boundaries in titanium act as regions of accelerated diffusion, and as the density of grain boundaries in titanium increases, or more precisely, their concentration at the interphase boundary, the intensity of mutual dissolution of the components increases proportionally. Thus, the high density of grain boundaries in titanium, as well as the release of stored energy from deformation-induced defects upon heating, are highlighted in this work as the main reasons for the reduced activation energy of the synthesis reaction in the Ti-Al system following intensive mechanical processing of the initial powder mixture.
225910
Junxian Fu, Ziyang Cui, Xi Lu, Xin Liu and Lijuan Wang
This study reports a green synthesis method for preparing silver nanoparticles (C-Ag NPs) using Coleus forskohlii extract, and the subsequent construction of a highly selective and robust Hg2+ colorimetric sensing platform. Under optimized conditions (80 °C, pH 8, 1.5 h, and a 1:2 volume ratio of AgNO3 to extract), the synthesized C-Ag NPs exhibited a uniform spherical morphology (15.6 ± 1.8 nm) with a characteristic surface plasmon resonance (SPR) absorption peak at 433 nm. Hg2+ was found to specifically induce C-Ag NP aggregation, leading to the disappearance of the SPR peak and a solution color change from yellowish-brown to milky white. The detection limit was determined to be 22.3 μM (RSD < 5%). The probe maintained moderate sensitivity with rapid visual readout towards Hg2+ even in the presence of diverse competing metal ions (Pb2+, Cd2+, Cu2+) and pathogens (e.g., E. coli and S. aureus), demonstrating excellent dual anti-interference capability. Analysis of authentic lake water samples confirmed the method’s suitability for rapid and reliable Hg2+ detection in complex environmental matrices, achieving a recovery rate of 98.6%.
225911
Yuanbo Wang, Xiaotian Zhang, Zhiliang Gong and Changlin Ding
The directional transmission of sound waves has been a research hotspot in the acoustic field. We present a channel structure based on the coupling of rectangular and semi-circular channels (RSC) to realize acoustic phase delay. Different parameter RSCs can realize linear phase shifts that cover the complete
span to control transmitted acoustic wavefront direction. We predict the anomalous refraction phenomenon and prove the dispersionless properties of RSCs array based on the generalized Snell’s law and acoustic radiation theory. Numerical simulation and experimental results show that RSCs array can realize 2000–14 000 Hz ultra-broadband anomalous refraction. Furthermore, We can realize broadband acoustic plane focusing and wave splitting by different phase arrangement of RSCs. The RSCs structure holds great potential application in the fields of directional acoustic transmission and environment acoustics due to its simple structure, ease of fabrication, dispersionless property and ultra-broadband directional function.
225912
J Y Zhang, B Wang, S J Zhao, G J Lyu, M Liu, E Pineda, P F Guan, K L Ngai and J C Qiao
Rejuvenation, contrary to aging process, can enhance mechanical properties in metallic glasses (MGs), but the related atomic scale mechanisms remain elusive. In this work, rejuvenation in a Cu45Zr45Al10 glass is generated through strain cyclic loading in a molecular dynamics simulation, in order to explore the involved microscopic features. The results find out that cyclic loading significantly regulates the energy state and the dynamical relaxation behavior of the metallic glass. Rejuvenation induced by cycling increases the dynamic heterogeneity and changes local structures in the whole system, not only in soft spots but also in rigid regions. During simulated dynamical mechanical spectroscopy non-activated atoms correspond to local-five-symmetry, but activated atoms exhibit structures with features that still need to be investigated. Our study reveals the microscopic dynamic and structural features of rejuvenation via cyclic loading in MGs, which can provide a theoretical basis for designing methods to control the properties of these materials.
225913
Neeraj Thakur, Anjna Bhardwaj, Arun Kumar and Amarjeet Singh
Two-dimensional transition metal dichalcogenides are promising sensing materials due to their tunable properties. Here, density functional theory is used to investigate hydrogen cyanide (HCN) adsorption on pristine and doped MoS
monolayers (X–MoS
, X = P, N, Si, Al, B, and Cl). Most dopants lead to weak physisorption with ultrafast recovery, while Al–MoS
exhibits strong chemisorption with an adsorption energy of
eV, resulting in an impractically long recovery time. Among the single-doped systems, Si–MoS
shows a favorable microsecond-scale response. To overcome the recovery-time limitations associated with strong adsorption, dopant concentration effects are examined by substituting two and three sulfur atoms with P, Si, and Al. A non-monotonic trend is observed, wherein double doping enhances the adsorption strength, while symmetric triple doping weakens the interaction, enabling recovery-time tuning at room temperature. In particular, 2Si–MoS
exhibits a recovery time of 15.48 min along with strong electronic sensitivity, whereas 3Al–MoS
achieves balanced adsorption with a recovery time of 3.24 ms, accompanied by significant work-function modulation and enhanced electron emission current density. This dopant-engineering approach provides an intrinsic and safer alternative to temperature- or field-driven desorption strategies, offering practical design guidelines for chemiresistive, electrochemical, and ultraviolet-based HCN sensing using MoS
.
225914
Ke Shi, Renqi Zhang, Jiachen Zhang, Xicheng Liu, Jiaxin Song, Kaiguang Liu and Huanli Wang
Half-Heusler (HH) compounds are promising thermoelectric (TE) materials for medium-to-high temperature applications, yet the coupled electron–phonon transport in TiCo-based HHs remains poorly understood despite reports of
. In this work, we have found that TiCoX (
= P, As, Sb) exhibits a ninefold valley degeneracy near the valence-band maximum, enabling intrinsically enhanced electrical transport. Owing to long phonon lifetimes, TiCoP, TiCoAs, and TiCoSb possess relatively high lattice thermal conductivities of 29.45, 46.59, and 16.17 W (mK)
at 300 K, yielding optimal p-type (n-type)
values of 0.79 (0.70), 0.87 (0.08), and 0.80 (0.27) at 800 K. At the same time, comparison with experiments reveals that elemental doping enhances carrier mobility and the Seebeck coefficient via an increased density-of-states effective mass, while Hf alloying suppresses lattice thermal conductivity by up to
and enhances
by
. Our results potentially establish a synergistic doping–alloying strategy for TiCo-based HH TEs, offering a promising route for high-efficiency waste heat recovery in industrial energy and chemical applications.
225915
Tingyu Zhao, Ruirui Cui, Kaixin Guo, Jun Zhang and Chaoyong Deng
Magnetoelectric filters are pivotal in modern wireless communication technology, where the center frequency can be adjusted by applying electric and magnetic fields. Herein, a novel microstrip hairpin-structured magnetoelectric dual-tunable bandpass filter with a center frequency of 4.75 GHz is designed based on the magnetoelectric coupling effect of a multiferroic Bi0.9Ce0.1Fe0.9Zn0.1O3/Ni0.5Zn0.5Fe2O4 composite film. The composite films are characterized, and the effects of changes in the applied electric and magnetic fields on the filter’s scattering parameters are investigated using a vector network analyzer. Results show that both applied fields can adjust the filter’s resonant frequency, thereby enabling bidirectional tunability of the filter’s magnetoelectric properties, which can be potentially applied in next-generation communication filters.
Machine learning with application to physical science
226001
Jing Ling and Jun Ma
Lensless in-line digital holography involves an ill-posed single-shot phase retrieval problem and is highly susceptible to twin-image artifacts. Physics-informed deep image prior (DIP) methods enable single-shot phase retrieval without paired training data, but their performance remains sensitive to the choice of a single global regularization weight, making it difficult to balance artifact suppression and detail preservation. In this work, we propose DIP-weights complex-valued total variation (wCTV), a physics-informed single-shot phase retrieval method that incorporates a complex-valued total variation (CTV) prior with pixel-adaptive weights into the DIP framework. The resulting optimization problem is solved using the alternating direction method of multipliers, where the per-pixel weights are dynamically updated according to the global data misfit and the local gradient magnitude, thereby enabling edge-adaptive regularization and implicit annealing during optimization. Experiments on both simulated and experimental in-line holograms show that DIP-wCTV improves twin-image suppression and phase reconstruction quality while preserving fine structural details, compared with classical iterative methods and existing DIP-based approaches. Additional analyses on convergence and parameter sensitivity further support the practical effectiveness and robustness of the proposed method.
226002
Han Huang, Wei Wang, Bochen Li and Zhenyao Xu
In this study, we combined first-principles calculations and machine learning algorithms to systematically investigate the electronic, mechanical, and optical properties of CsPbBr3 doped with alkali metal interstitial atoms. A neural network-based prediction model was constructed to achieve efficient prediction of dopant coordinates and system energy. The results indicate that interstitial doping primarily induces lattice distortion through a filling effect, significantly enhancing the ductility of the material. Additionally, doping widens the band gap. Alkali metal doping generally leads to a decrease in the elastic modulus, confirming the existence of a lattice softening effect. Notably, Li doping exhibits the highest B/G, demonstrating superior ductility and providing a theoretical basis for the synergistic optimization of mechanical properties and optoelectronic stability.