Table of contents for issue 18, volume 34, Journal of Physics: Condensed Matter

    Topical Reviews

  • 183001

    , , , and

    Recent progress in the synthesis and assembly of two-dimensional (2D) materials has laid the foundation for various applications of atomically thin layer films. These 2D materials possess rich and diverse properties such as layer-dependent band gaps, interesting spin degrees of freedom, and variable crystal structures. They exhibit broad application prospects in micro-nano devices. In the meantime, the wide bandgap semiconductors (WBS) with an elevated breakdown voltage, high mobility, and high thermal conductivity have shown important applications in high-frequency microwave devices, high-temperature and high-power electronic devices. Beyond the study on single 2D materials or WBS materials, the multi-functional 2D/WBS heterostructures can promote the carrier transport at the interface, potentially providing novel physical phenomena and applications, and improving the performance of electronic and optoelectronic devices. In this review, we overview the advantages of the heterostructures of 2D materials and WBS materials, and introduce the construction methods of 2D/WBS heterostructures. Then, we present the diversity and recent progress in the applications of 2D/WBS heterostructures, including photodetectors, photocatalysis, sensors, and energy related devices. Finally, we put forward the current challenges of 2D/WBS heterostructures and propose the promising research directions in the future.

  • 183002
    The following article is Open access

    , , , , , , , , , et al

    Designing materials with advanced functionalities is the main focus of contemporary solid-state physics and chemistry. Research efforts worldwide are funneled into a few high-end goals, one of the oldest, and most fascinating of which is the search for an ambient temperature superconductor (A-SC). The reason is clear: superconductivity at ambient conditions implies being able to handle, measure and access a single, coherent, macroscopic quantum mechanical state without the limitations associated with cryogenics and pressurization. This would not only open exciting avenues for fundamental research, but also pave the road for a wide range of technological applications, affecting strategic areas such as energy conservation and climate change. In this roadmap we have collected contributions from many of the main actors working on superconductivity, and asked them to share their personal viewpoint on the field. The hope is that this article will serve not only as an instantaneous picture of the status of research, but also as a true roadmap defining the main long-term theoretical and experimental challenges that lie ahead. Interestingly, although the current research in superconductor design is dominated by conventional (phonon-mediated) superconductors, there seems to be a widespread consensus that achieving A-SC may require different pairing mechanisms.

    In memoriam, to Neil Ashcroft, who inspired us all.

  • Special Issue Articles

  • 184001

    , , , , , and

    To improve performance of intermediate temperature solid oxide fuel cells (IT-SOFCs), the negative thermal expansion (NTE) material Sm0.85Zn0.15MnO3 (SZM) is introduced in Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ (BSFCT) cathode. XRD results indicate that BSFCT, SZM and Ce0.8Sm0.2O2−δ (SDC) oxides have good chemical compatibility up to 1173 K. The average linear thermal expansion coefficient of BSFCT–xSZM (x = 0, 10, 20 and 30 wt.%) decreases markedly from 29.2 × 10−6 K−1 for x = 0 wt.% to 15.6 × 10−6 K−1 for x = 30 wt.%. The electrochemical performance of single cells with configuration of NiO–BZCY|SDC|BSFCT–xSZM is comparatively investigated in the 773–973 K. The best performance is observed for x = 20 wt.%, which should be caused by the balance between thermal matching of cathode/electrolyte layers and oxygen reduction reaction activity of composite cathodes. The corresponding peak power density in the 773–973 K is 136–918 mW cm−2, which is 249%–64% higher than that (39–559 mW cm−2) with single BSFCT cathode. Due to the existence of electron blocking layer at anode/electrolyte interface, the open circuit voltage of all cells is higher than 1.0 V. In short, the introduction of NTE oxide in conventional cathode materials may provide an effective strategy to enhance the performance of IT-SOFCs with electron blocking layer.

  • 184002

    , , and

    The generalized continuous multiple step (GCMS) potential is presented in this work. Its flexible form allows for repulsive and/or attractive contributions to be encoded through adjustable energy and length scales. The GCMS interaction provides a continuous representation of square-well, square-shoulder potentials and their variants for implementation in computer simulations. A continuous and differentiable energy representation is required to derive forces in conventional simulation algorithms. Molecular dynamics simulations are of particular interest when considering the dynamic properties of a system. The GCMS potential can mimic other interactions with a judicious choice of parameters due to the versatile sigmoid form. In this study, our benchmarks for the GCMS representation include triangular, Yukawa, Franzese, and Lennard-Jones potentials. Comparisons made with published data on volumetric phase diagrams, liquid structure, and diffusivity from model systems are in excellent agreement.

  • 184003

    , , , , , , , and

    The search for sp3-hybridized carbon allotropes other than diamond has attracted extensive interest because of their fascinating properties. In this paper, an orthorhombic carbon phase in sp3 bonding, named pentaheptite diamond, by combining the particle swarm optimization method with first-principles calculations has been predicted. The phonon spectra, total energy and elastic constants calculations of the pentaheptite diamond confirm its dynamical, thermal and mechanical stability at zero pressure, respectively. It possesses a high bulk modulus of 385 GPa and Vickers hardness of 72.6 GPa, comparable to diamond. Electronic band structure calculations show that the pentaheptite diamond has a direct band gap of 4.18 eV.

  • 184004

    and

    Random-walk models are frequently used to model distinct natural phenomena such as diffusion processes, stock-market fluctuations, and biological systems. Here, we present a random-walk model to describe the dynamics of glucose uptake by the sodium-glucose transporter of type 2, SGLT2. Our starting point is the canonical alternating-access model, which suggests the existence of six states for the transport cycle. We propose the inclusion of two new states to this canonical model. The first state is added to implement the recent discovery that the Na+ ion can exit before the sugar is released into the proximal tubule epithelial cells. The resulting model is a seven-state mechanism with stochastic steps. Then we determined the transition probabilities between these seven states and used them to write a set of master equations to describe the time evolution of the system. We showed that our model converges to the expected equilibrium configuration and that the binding of Na+ and glucose to SGLT2 in the inward-facing conformation must be necessarily unordered. After that, we added another state to implement inhibition in the model. Our results reproduce the experimental dependence of glucose uptake on the inhibitor concentration and they reveal that the inhibitors act by decreasing the number of available SGLT2s, which increases the chances of glucose escaping reabsorption.

  • 184005
    The following article is Open access

    , and

    Elastic filaments driven out of equilibrium display complex phenomena that involve periodic changes in their shape. Here, the periodic deformation dynamics of semiflexible colloidal chains in an eccentric magnetic field are presented. This field changes both its magnitude and direction with time, leading to novel nonequilibrium chain structures. Deformation into S-, Z-, and 4-mode shapes arises via the propagation and growth of bending waves. Transitions between these morphologies are governed by an interplay among magnetic, viscous, and elastic forces. Furthermore, the periodic behavior leading to these structures is described by four distinct stages of motion that include rotation, arrest, bending, and stretching of the chain. These stages correspond to specific intervals of the eccentric field’s period. A scaling analysis that considers the relative ratio of viscous to magnetic torques via a critical frequency illustrates how to maximize the bending energy. These results provide new insights into controlling colloidal assemblies by applying complex magnetic fields.

  • Papers

    Nanostructures and nanoelectronics

  • 185301

    , , , , , and

    We consider the non-equilibrium zero frequency noise generated by a temperature gradient applied on a device composed of two normal leads separated by a quantum dot. We recall the derivation of the scattering theory for non-equilibrium noise for a general situation where both a bias voltage and a temperature gradient can coexist and put it in a historical perspective. We provide a microscopic derivation of zero frequency noise through a quantum dot based on a tight binding Hamiltonian, which constitutes a generalization of the seminal result obtained for the current in the context of the Keldysh formalism. For a single level quantum dot, the obtained transmission coefficient entering the scattering formula for the non-equilibrium noise corresponds to a Breit–Wigner resonance. We compute the delta-T noise as a function of the dot level position, and for a broad range of values of the dot level width, in the Breit–Wigner case, for two relevant situations which were considered recently in two separate experiments. In the regime where the two reservoir temperatures are comparable, our gradient expansion shows that the delta-T noise is dominated by its quadratic contribution, and is minimal close to resonance. In the opposite regime where one reservoir is much colder, the gradient expansion fails and we find the noise to be typically linear in temperature before saturating. In both situations, we conclude with a short discussion of the case where both a voltage bias and a temperature gradient are present, in order to address the potential competition with thermoelectric effects.

  • Electronic structure

  • 185501
    The following article is Open access

    , , and

    The laminated ternary boride Mo5SiB2 of T2 structure have two symmetrically inequivalent metallic sites, 16l and 4c, being occupied in a 4:1 ratio. The phase was recently shown to be stable for 80% substitution of Mo for Ti, at the majority site, forming an out-of-plane chemically ordered quaternary boride: Ti4MoSiB2. Considering that the hypothetical Ti5SiB2 is theoretically predicted as not stable, a key difference in bonding characteristics is indicated for full substitution of Mo for Ti at the metallic sites. To explore the origin of formation of Ti4MoSiB2, we here investigate the electronic properties and bonding characteristics of Mo5SiB2, Ti4MoSiB2 and Ti5SiB2 through their density of states, projected crystal orbital Hamilton population (pCOHP), Bader charge partitioning and second order force constants. The bond between the two different metallic sites is found to be key to the stability of the compounds, evident from the pCOHP of this bond showing a peak of bonding states close to the Fermi level, which is completely filled in Mo5SiB2 and Ti4MoSiB2, while only partially filled in Ti5SiB2. Furthermore, the lower electronegativity of Ti compared to Mo results in charge accumulation at the Si and B sites, which coincides with a reduced bond strength in Ti5SiB2 compared to Mo5SiB2 and Ti4MoSiB2. Bandstructure calculations show that all three structures are metallic. The calculated mechanical and elastic properties show reduced bulk (B) and elastic (E) moduli when introducing Ti in Mo5SiB2, from 279 and 365 GPa to 176 and 258 GPa, respectively. The Pugh criteria indicates also a slight reduction in ductility, with a G/B ratio increasing from 0.51 to 0.59.

  • Physics of materials

  • 185701

    , and

    A novel model potential is developed for simulating oxidised oligopyrroles in condensed phases. The force field is a coarse grained model that represents the pyrrole monomers as planar rigid bodies with fixed charge and dipole moment and the chlorine dopants as point atomic charges. The analytic function contains 17 adjustable parameters that are initially fitted on a database of small structures calculated within all-electron density functional theory. A subsequent potential function refinement is pursued with a battery of condensed phase isothermal–isobaric Metropolis Monte Carlo in-silico simulations at ambient conditions with the goal of implementing a hybrid parametrization protocol enabling agreement with experimentally known thermodynamic properties of oxidised polypyrrole. The condensed system is composed of oligomers containing 12 monomers with a 1:3 dopant-to-monomer concentration. The final set of force field optimised parameters yields an equilibrium density of the condensed system at ambient conditions in excellent agreement with oxidised polypyrrole samples synthesised in wet-laboratories.

  • 185702

    and

    Valleytronic as a hot topic in recent years focuses on electrons’ valley degree of freedom as a quantum information carrier. Here, by combining two-band k.p model with high-throughput density functional theory (DFT) calculations, the valley states of Janus 2H-VSSe monolayer are studied which have spontaneous polarization. Nonvolatile valley polarization state is mainly arises from intrinsic ferromagnetism contributed by V-3d electronic configuration and not the spontaneous out-of-plane dipole moment of VSSe monolayer. The effective Hamiltonian model and DFT calculations both showed that the valley splitting mainly originates from the smaller spin splitting coming from the spin–orbit coupling effect rather than the spin splitting of magnetic exchange field. By using the effective Dirac Hamiltonian and Kubo formula, we further calculated the longitudinal and transversal conductivities and absorption spectra of VSSe monolayer which exhibits an anomalous valley Hall effect and clear valley-selective circular dichroism. Our calculations indicate that the modification of valley and spin splitting related to Berry curvature by applying an external strain is more noticeable than by the change of the magnetic moment orientation and electric field. We found that carriers accumulation with particular spin and valley label can be manipulated by tuning effective Hamiltonian parameters. The coexistence of robust in-plane magnetic ordering and spontaneous valley polarization of 2H-VSSe monolayer supports the possibility of applications in spintronics, valleytronics and optoelectronics devices.

  • 185703

    The article deals with the issue of the influence of a separate mode of molecular vibrations on the formation of the thermoluminescence from disordered systems with quasi-continuous spectra of localized carriers. The contribution of vibrations is noticeable if the energy of their quanta is close to the depth of some localized carriers and the transition of the carrier into the conductive region occurs via absorption of these quanta. At some value of a carrier–vibration interaction, the effect manifests itself in the appearance of a fine discrete structure on the generally smooth thermoluminescence curve. The thermoluminescence of polymers is calculated using the model of non-adiabatic transitions, in which the carrier–vibrational interaction is determined by the displacements of nuclei in the presence of the carrier. The dependence of the arising discrete structure of the thermoluminescence curve on a number of parameters of the system like the magnitude of the carrier–vibration interaction, the width of vibrational levels, the parameters of the conductive region is investigated. The processes with participation of multiple quanta of vibrations are investigated and the formation of repetitive structures on the thermoluminescence curve has been shown owing to the absorption of several vibrational quanta. Analysis of a number of experiments is presented using the suggested theory.