Table of contents for issue 41, volume 28, Journal of Physics: Condensed Matter

Volume 28

Number 41, 19 October 2016

Previous issueNext issue

Special Issue on 50 Years of Liquid State Theory

    Preface

  • 410301
    The following article is Free article

    , , , and

  • Obituary

  • 410401
    The following article is Free article

    , , , and

  • Papers

  • 414001

    and

    In this work we study the correlation energy of the quantized electron gas of uniform density at temperature T  =  0. To do so we utilize methods from classical statistical mechanics. The basis for this is the Feynman path integral for the partition function of quantized systems. With this representation the quantum mechanical problem can be interpreted as, and is equivalent to, a classical polymer problem in four dimensions where the fourth dimension is imaginary time. Thus methods, results, and properties obtained in the statistical mechanics of classical fluids can be utilized. From this viewpoint we recover the well known RPA (random phase approximation). Then to improve it we modify the RPA by requiring the corresponding correlation function to be such that electrons with equal spins can not be on the same position. Numerical evaluations are compared with well known results of a standard parameterization of Monte Carlo correlation energies.

  • 414002

    , and

    We revisit a problem already studied 15 years ago by us in collaboration with Stell and Hemmer: the isostructural solid–solid transitions induced by repulsive particle interactions exhibited by classical systems interacting via the Stell–Hemmer potentials. The full phase diagram in the crystal region is obtained by applying a perturbation theory for classical solids used during our collaboration with Stell. Also, the performance of such a theory is now tested by comparing the perturbative phase diagram with that obtained from computer simulations. The latter was calculated using a recently refined method to obtain the free-energy of crystals by means of Monte Carlo simulations. The perturbation theory captures the correct topology and correctly identifies the stable, fcc and bcc, phases. In addition, the theory predicts the occurrence of special points: a point where the two stable structures coexist at the same density, and two critical points terminating the corresponding isostructural phase transitions for fcc and bcc phases. The location of some of these features in the phase diagram is predicted almost quantitatively. However, phase boundaries involving the non-compact bcc phase are much less accurate, a problem that can be traced to the poor representation used for the bcc phase of the reference, hard-sphere, system.

  • 414003

    , and

    We study the vapour-liquid phase behaviour of an ionic fluid confined in a random porous matrix formed by uncharged hard sphere particles. The ionic fluid is modelled as an equimolar binary mixture of oppositely charged equisized hard spheres, the so-called restricted primitive model (RPM). Considering the matrix-fluid system as a partly-quenched model, we develop a theoretical approach which combines the method of collective variables with the extension of the scaled-particle theory (SPT) for a hard-sphere fluid confined in a disordered hard-sphere matrix. The approach allows us to formulate the perturbation theory using the SPT for the description of the thermodynamics of the reference system. The phase diagrams of the RPM in matrices of different porosities and for different size ratios of matrix and fluid particles are calculated in the random-phase approximation and also when the effects of higher-order correlations between ions are taken into account. Both approximations correctly reproduce the basic effects of porous media on the vapour-liquid phase diagram, i.e. with a decrease of porosity the critical point shifts towards lower fluid densities and lower temperatures and the coexistence region gets narrower. For the fixed matrix porosity, both the critical temperature and the critical density increase with an increase of size of matrix particles and tend to the critical values of the bulk RPM.

  • 414004

    and

    We obtain lower bounds on the inverse compressibility of systems whose Lee–Yang zeros of the grand-canonical partition function lie in the left half of the complex fugacity plane. This includes in particular systems whose zeros lie on the negative real axis such as the monomer-dimer system on a lattice. We also study the virial expansion of the pressure in powers of the density for such systems. We find no direct connection between the positivity of the virial coefficients and the negativity of the L–Y zeros, and provide examples of either one or both properties holding. An explicit calculation of the partition function of the monomer-dimer system on two rows shows that there are at most a finite number of negative virial coefficients in this case.

  • 414005

    , , and

    The ionophobicity effect of nanoporous electrodes on the capacitance and the energy storage capacity of nonaqueous-electrolyte supercapacitors is studied by means of the classical density functional theory (DFT). It has been hypothesized that ionophobic nanopores may create obstacles in charging, but they store energy much more efficiently than ionophilic pores. In this study, we find that, for both ionic liquids and organic electrolytes, an ionophobic pore exhibits a charging behavior different from that of an ionophilic pore, and that the capacitance–voltage curve changes from a bell shape to a two-hump camel shape when the pore ionophobicity increases. For electric-double-layer capacitors containing organic electrolytes, an increase in the ionophobicity of the nanopores leads to a higher capacity for energy storage. Without taking into account the effects of background screening, the DFT predicts that an ionophobic pore containing an ionic liquid does not enhance the supercapacitor performance within the practical voltage ranges. However, by using an effective dielectric constant to account for ion polarizability, the DFT predicts that, like an organic electrolyte, an ionophobic pore with an ionic liquid is also able to increase the energy stored when the electrode voltage is beyond a certain value. We find that the critical voltage for an enhanced capacitance in an ionic liquid is larger than that in an organic electrolyte. Our theoretical predictions provide further understanding of how chemical modification of porous electrodes affects the performance of supercapacitors.

  • 414006

    , and

    We consider the dielectric response of angularly dependent site–site theories for models of aqueous saline solutions. We find that we can use relatively low order approximations of the angularly dependent correlation functions with correct long ranged behavior to obtain good estimates of the dielectric constant for three site water models and simple 1–1 salts. We find that the solution thermodynamics results for this level of theory, as measured by the Kirkwood G integrals and the excess chemical potentials, are in good quantitative agreement with simulation even when the details of the short ranged structure is not as accurately determined. We find that the dielectric constant predictions of both the pure fluid and the salt-water mixtures are similarly predictive, in comparison to both simulation and experiment.

  • 414007

    , and

    Inspired by significant improvements obtained for the performances of the polymer reference interaction site model (PRISM) theory of the fluid phase when coupled with ‘molecular closures’ (Schweizer and Yethiraj 1993 J. Chem. Phys. 98 9053), we exploit a matrix generalization of this concept, suitable for the more general RISM framework. We report a preliminary test of the formalism, as applied to prototype square-well homonuclear diatomics. As for the structure, comparison with Monte Carlo shows that molecular closures are slightly more predictive than their ‘atomic’ counterparts, and thermodynamic properties are equally accurate. We also devise an application of molecular closures to models interacting via continuous, soft-core potentials, by using well established prescriptions in liquid state perturbation theories. In the case of Lennard-Jones dimers, our scheme definitely improves over the atomic one, providing semi-quantitative structural results, and quite good estimates of internal energy, pressure and phase coexistence. Our finding paves the way to a systematic employment of molecular closures within the RISM framework to be applied to more complex systems, such as molecules constituted by several non-equivalent interaction sites.

  • 414008

    and

    In order to design a flexible molecular model that mimics the chemical moieties of a polyatomic molecule, we propose the ‘composite-sphere’ model that can assemble the essential elements to produce the structure of the target molecule. This is likened to the polymerization process where monomers assemble to form the polymer. The assemblage is built into the pair interaction potentials which can ‘react’ (figuratively) with selective pieces into various bonds. In addition, we preserve the spherical symmetries of the individual pair potentials so that the isotropic Ornstein–Zernike equation (OZ) for multi-component mixtures can be used as a theoretical framework. We first test our approach on generating a dumbbell molecule. An equimolar binary mixture of hard spheres and square-well spheres are allowed to react to form a dimer. As the bond length shrinks to zero, we create a site–site model of a Janus-like molecule with a repulsive moiety and an attractive moiety. We employ the zero-separation (ZSEP) closure to solve the OZ equations. The structure and thermodynamic properties are calculated at three isotherms and at several densities and the results are compared with Monte Carlo simulations. The close agreement achieved demonstrates that the ZSEP closure is a reliable theory for this composite-sphere fluid model.

  • 414009

    and

    We perform structural and thermodynamic calculations in the framework of the modified hypernetted chain (MHNC) integral equation closure to the Ornstein–Zernike equation for binary mixtures of size-different particles interacting with hard-core Yukawa pair potentials. We use the Percus–Yevick (PY) bridge functions of a binary mixture of hard-sphere (HSM) particles. The hard-sphere diameters of the PY bridge functions of the HSM system are adjusted so to achieve thermodynamic consistency between the virial and compressibility equations of state. We show the benefit of thermodynamic consistency by comparing the MHNC results with the available computer simulation data reported in the literature, and we demonstrate that the self-consistent thermodynamic theory provides a better reproduction of the simulation data over other microscopic theories.

  • 414010

    and

    We have developed a theory for inhomogeneous systems that allows for the incorporation of the effects of mesoscopic fluctuations. A hierarchy of equations relating the correlation and direct correlation functions for the local excess $\phi \left(\mathbf{r}\right)$ of the volume fraction of particles ζ has been obtained, and an approximation leading to a closed set of equations for the two-point functions has been introduced for the disordered inhomogeneous phase. We have numerically solved the self-consistent equations for one-dimensional (1D) and three-dimensional (3D) models with short-range attraction and long-range repulsion. Predictions for all of the qualitative properties of the 1D model agree with the exact results, but only semi-quantitative agreement is obtained in the simplest version of the theory. The effects of fluctuations in the two 3D models considered are significantly different, despite the very similar properties of these models in the mean-field approximation. In both cases we obtain the sequence of large–small–large compressibility for increasing ζ. The very small compressibility is accompanied by the oscillatory decay of correlations with correlation lengths that are orders of magnitude larger than the size of particles. In one of the two models considered, the small compressibility becomes very small and the large compressibility becomes very large with decreasing temperature, and eventually van der Waals loops appear. Further studies are necessary in order to determine the nature of the strongly inhomogeneous phase present for intermediate volume fractions in 3D.

  • 414011

    , and

    The approach developed earlier to describe the dimerizing shielded attractive shell (SAS) primitive model of chemical association due to Cummings and Stell is generalized and extended to include a description of a polymerizing SAS model. Our extension is based on the combination of the resummed thermodynamic perturbation theory for central force (RTPT-CF) associating potential and self consistent scheme, which takes into account the changes in the system free volume due to association. Theoretical results for thermodynamical properties of the model at different bonding length, density and temperature are compared against newly generated computer simulation results. The theory gives very accurate predictions for the model with bonding length L* from the range 0  <  L*  <  0.6 at all values of the density and temperature studied, including the limit of infinitely large temperature.

  • 414012

    Disordered hyperuniform many-body systems are distinguishable states of matter that lie between a crystal and liquid: they are like perfect crystals in the way they suppress large-scale density fluctuations and yet are like liquids or glasses in that they are statistically isotropic with no Bragg peaks. These systems play a vital role in a number of fundamental and applied problems: glass formation, jamming, rigidity, photonic and electronic band structure, localization of waves and excitations, self-organization, fluid dynamics, quantum systems, and pure mathematics. Much of what we know theoretically about disordered hyperuniform states of matter involves many-particle systems. In this paper, we derive new rigorous criteria that disordered hyperuniform two-phase heterogeneous materials must obey and explore their consequences. Two-phase heterogeneous media are ubiquitous; examples include composites and porous media, biological media, foams, polymer blends, granular media, cellular solids, and colloids. We begin by obtaining some results that apply to hyperuniform two-phase media in which one phase is a sphere packing in d-dimensional Euclidean space ${{\mathbb{R}}^{d}}$ . Among other results, we rigorously establish the requirements for packings of spheres of different sizes to be ‘multihyperuniform’. We then consider hyperuniformity for general two-phase media in ${{\mathbb{R}}^{d}}$ . Here we apply realizability conditions for an autocovariance function and its associated spectral density of a two-phase medium, and then incorporate hyperuniformity as a constraint in order to derive new conditions. We show that some functional forms can immediately be eliminated from consideration and identify other forms that are allowable. Specific examples and counterexamples are described. Contact is made with well-known microstructural models (e.g. overlapping spheres and checkerboards) as well as irregular phase-separation and Turing-type patterns. We also ascertain a family of autocovariance functions (or spectral densities) that are realizable by disordered hyperuniform two-phase media in any space dimension, and present select explicit constructions of realizations. These studies provide insight into the nature of disordered hyperuniformity in the context of heterogeneous materials and have implications for the design of such novel amorphous materials.

  • 414013

    Previous studies have reached conflicting conclusions regarding the interplay of cavity formation, polarizability, desolvation, and surface capillary waves in driving the interfacial adsorptions of ions and molecules at air–water interfaces. Here we revisit these questions by combining exact potential distribution results with linear response theory and other physically motivated approximations. The results highlight both exact and approximate compensation relations pertaining to direct (solute–solvent) and indirect (solvent–solvent) contributions to adsorption thermodynamics, of relevance to solvation at air–water interfaces, as well as a broader class of processes linked to the mean force potential between ions, molecules, nanoparticles, proteins, and biological assemblies.

  • 414014

    The solvation energetics associated with the transformation of a solute molecule at infinite dilution in water from an initial state A to a final state B is reconsidered. The two solute states have different potentials energies of interaction, ${{\Psi}^{\text{A}}}$ and ${{\Psi}^{\text{B}}}$ , with the solvent environment. Throughout the A $\to $ B transformation of the solute, the solvation system is described by a Hamiltonian $H\left(\xi \right)$ that changes linearly with the coupling parameter ξ. By focusing on the characterization of the probability density ${{\wp}_{\xi}}\left(\,y\right)$ that the dimensionless perturbational solute–solvent interaction energy $Y=\beta \,\left({{\Psi}^{\text{B}}}-{{\Psi}^{\text{A}}}\right)$ has numerical value y when the coupling parameter is ξ, we derive a hierarchy of differential equation relations between the ξ-dependent cumulant functions of various orders in the expansion of the appropriate cumulant generating function. On the basis of this theoretical framework we then introduce an inherently nonlinear solvation model for which we are able to find analytical results for both ${{\wp}_{\xi}}\,\left(\,y\right)$ and for the solvation thermodynamic functions. The solvation model is based on the premise that there is an upper or a lower bound (depending on the nature of the interactions considered) to the amplitude of the fluctuations of Y in the solution system at equilibrium. The results reveal essential differences in behavior for the model when compared with the linear response approximation to solvation, particularly with regards to the probability density ${{\wp}_{\xi}}\,\left(\,y\right)$ . The analytical expressions for the solvation properties show, however, that the linear response behavior is recovered from the new model when the room for the thermal fluctuations in Y is not restricted by the existence of a nearby bound. We compare the predictions of the model with the results from molecular dynamics computer simulations for aqueous solvation, in which either (1) the solute–solvent electrostatic interactions, or (2) the shorter-range attractive interactions are switched-on in the A $\to $ B process.

  • 414015
    The following article is Open access

    , and

    Systems with short-range attractive and long-range repulsive interactions are able to form mesophases at sufficiently low temperatures. In two dimensions, such mesophases emerge as clusters, stripes or bubbles. Using extensive Monte Carlo simulations we investigate the static and the dynamic properties of such a cluster-forming system over a broad temperature range and for different densities. Via the static properties we analyse how ordering into close packed configurations sets in both at the level of the particles as well as at the level of the clusters. The dynamic properties provide information on how, at low temperature, the motion of individual particles is influenced by the dynamic slowing down of the clusters. Finally, we discuss the different diffusion mechanisms at play at low and intermediate densities.

  • 414016

    Simulation within the grand canonical ensemble is the method of choice for accurate studies of first order vapour-liquid phase transitions in model fluids. Such simulations typically employ sampling that is biased with respect to the overall number density in order to overcome the free energy barrier associated with mixed phase states. However, at low temperature and for large system size, this approach suffers a drastic slowing down in sampling efficiency. The culprits are geometrically induced transitions (stemming from the periodic boundary conditions) which involve changes in droplet shape from sphere to cylinder and cylinder to slab. Since the overall number density does not discriminate sufficiently between these shapes, it fails as an order parameter for biasing through the transitions. Here we report two approaches to ameliorating these difficulties. The first introduces a droplet shape based order parameter that generates a transition path from vapour to slab states for which spherical and cylindrical droplets are suppressed. The second simply biases with respect to the number density in a tetragonal subvolume of the system. Compared to the standard approach, both methods offer improved sampling, allowing estimates of coexistence parameters and vapor-liquid surface tension for larger system sizes and lower temperatures.

  • 414017

    , and

    We study a two-dimensional system of dipolar hard disks in the presence of a uniform external electric field $\mathcal{E}$ by Monte Carlo simulations in a square with periodic boundary conditions. The study is performed in both the fluid at high temperature and the phase of living polymers at low temperature. In the considered geometry the macroscopic Maxwell field $\mathbf{E}$ is computed and found to be equal to the external field $\mathcal{E}$ in both phases. The dielectric properties of the system in the liquid phase as well as in the polymeric phase are investigated.

  • 414018

    , and

    The static dielectric permittivity and dielectric relaxation properties of fructose aqueous solutions of different concentrations ranging from 1.0 to 4.0 mol l−1 are investigated by means of molecular dynamics simulations. The contributions from intra- and interspecies molecular correlations were computed individually for both the static and frequency-dependent dielectric properties, and the results were compared with the available experimental data. Simulation results in the time- and frequency-domains were analyzed and indicate that the presence of fructose has little effect on the position of the fast, high-frequency (>500 cm−1) components of the dielectric response spectrum. The low-frequency (<0.1 cm−1) components, however, are markedly influenced by sugar concentration. Our analysis indicates that fructose–fructose and fructose–water interactions strongly affect the rotational-diffusion regime of molecular motions in the solutions. Increasing fructose concentration not only enhances sugar–sugar and sugar-water low frequency contributions to the dielectric loss spectrum but also slows down the reorientational dynamics of water molecules. These results are consistent with previous computer simulations carried out for other disaccharide aqueous solutions.

  • 414019

    and

    The adsorption of proteins on nanoparticles results in the formation of the protein corona, the composition of which determines how nanoparticles influence their biological surroundings. We seek to better understand corona formation by developing models that describe protein adsorption on nanoparticles using computer simulation results as data. Using a coarse-grained protein model, discontinuous molecular dynamics simulations are conducted to investigate the adsorption of two small proteins (Trp-cage and WW domain) on a model nanoparticle of diameter 10.0 nm at protein concentrations ranging from 0.5 to 5 mM. The resulting adsorption isotherms are well described by the Langmuir, Freundlich, Temkin and Kiselev models, but not by the Elovich, Fowler–Guggenheim and Hill–de Boer models. We also try to develop a generalized model that can describe protein adsorption equilibrium on nanoparticles of different diameters in terms of dimensionless size parameters. The simulation results for three proteins (Trp-cage, WW domain, and GB3) on four nanoparticles (diameter  =  5.0, 10.0, 15.0, and 20.0 nm) illustrate both the promise and the challenge associated with developing generalized models of protein adsorption on nanoparticles.

  • 414020

    The structure of room temperature ionic liquids is studied using molecular dynamics simulations and integral equation theory. Three ionic liquids 1-alkyl-3-methylimidazolium hexfluorophosphate, [CnMIM] [PF6], for n  =  1, 4, and 8, are studied using a united atom model of the ions. The primary interest is a study of the pair correlation functions and a test of the reference interaction site model theory. There is liquid-like ordering in the liquid that arises from electrostatic attractions and steric packing considerations. The theory is not in quantitative agreement with the simulation results and underestimates the degree of liquid-like order. A pre-peak in the static structure factor is seen in both simulations and theory, suggesting that this is a geometric effect arising from a packing of the alkyl chains.

  • 414021

    , , and

    Mechanical stress plays an intricate role in gene expression in individual cells and sculpting of developing tissues. However, systematic methods of studying how mechanical stress and feedback help to harmonize cellular activities within a tissue have yet to be developed. Motivated by our observation of the cellular constriction chains (CCCs) during the initial phase of ventral furrow formation in the Drosophila melanogaster embryo, we propose an active granular fluid (AGF) model that provides valuable insights into cellular coordination in the apical constriction process. In our model, cells are treated as circular particles connected by a predefined force network, and they undergo a random constriction process in which the particle constriction probability P is a function of the stress exerted on the particle by its neighbors. We find that when P favors tensile stress, constricted particles tend to form chain-like structures. In contrast, constricted particles tend to form compact clusters when P favors compression. A remarkable similarity of constricted-particle chains and CCCs observed in vivo provides indirect evidence that tensile-stress feedback coordinates the apical constriction activity. Our particle-based AGF model will be useful in analyzing mechanical feedback effects in a wide variety of morphogenesis and organogenesis phenomena.

  • 414022

    I consider stochastic variants of a simple reacting sphere (SRS) kinetic model (Xystris and Dahler 1978 J. Chem. Phys. 68 387–401, Qin and Dahler 1995 J. Chem. Phys. 103 725–50, Dahler and Qin 2003 J. Chem. Phys. 118 8396–404) for dense reacting mixtures. In contrast to the line-of-center models of chemical reactive models, in the SRS kinetic model, the microscopic reversibility (detailed balance) can be easily shown to be satisfied, and thus all mathematical aspects of the model can be fully justified. In the SRS model, the molecules behave as if they were single mass points with two internal states. Collisions may alter the internal states of the molecules, and this occurs when the kinetic energy associated with the reactive motion exceeds the activation energy. Reactive and non-reactive collision events are considered to be hard sphere-like. I consider a four component mixture A, B, A*, B*, in which the chemical reactions are of the type $A+B\rightleftharpoons {{A}^{\ast}}+{{B}^{\ast}}$ , with A* and B* being distinct species from A and B.

    This work extends the joined works with George Stell to the kinetic models of dense inert and reactive mixtures. The idea of introducing smearing-type effect in the collisional process results in a new class of stochastic kinetic models for both inert and reactive mixtures. In this paper the important new mathematical properties of such systems of kinetic equations are proven. The new results for stochastic revised Enskog system for inert mixtures are also provided.