Table of contents for issue 33, volume 28, Journal of Physics: Condensed Matter

Volume 28

Number 33, 24 August 2016

Previous issueNext issue

Buy this issue in print

    Special issue paper

  • 334001

    , , , , , , , , and

    This article reviews new superconducting phases of carbon-based materials. During the past decade, new carbon-based superconductors have been extensively developed through the use of intercalation chemistry, electrostatic carrier doping, and surface-proving techniques. The superconducting transition temperature Tc of these materials has been rapidly elevated, and the variety of superconductors has been increased. This review fully introduces graphite, graphene, and hydrocarbon superconductors and future perspectives of high-Tc superconductors based on these materials, including present problems. Carbon-based superconductors show various types of interesting behavior, such as a positive pressure dependence of Tc. At present, experimental information on superconductors is still insufficient, and theoretical treatment is also incomplete. In particular, experimental results are still lacking for graphene and hydrocarbon superconductors. Therefore, it is very important to review experimental results in detail and introduce theoretical approaches, for the sake of advances in condensed matter physics. Furthermore, the recent experimental results on hydrocarbon superconductors obtained by our group are also included in this article. Consequently, this review article may provide a hint to designing new carbon-based superconductors exhibiting higher Tc and interesting physical features.

  • Papers

    Computational and experimental methods

  • 335201

    , and

    We introduce and discuss a hybrid quantum-mechanics molecular-mechanics (QM-MM) approach for Car–Parrinello DFT simulations with pseudopotentials and planewaves basis, designed for the treatment of periodic systems. In this implementation the MM atoms are considered as additional QM ions having fractional charges of either sign, which provides conceptual and computational simplicity by exploiting the machinery already existing in planewave codes to deal with electrostatics in periodic boundary conditions. With this strategy, both the QM and MM regions are contained in the same supercell, which determines the periodicity for the whole system. Thus, while this method is not meant to compete with non-periodic QM-MM schemes able to handle extremely large but finite MM regions, it is shown that for periodic systems of a few hundred atoms, our approach provides substantial savings in computational times by treating classically a fraction of the particles. The performance and accuracy of the method is assessed through the study of energetic, structural, and dynamical aspects of the water dimer and of the aqueous bulk phase. Finally, the QM-MM scheme is applied to the computation of the vibrational spectra of water layers adsorbed at the TiO2 anatase (1 0 1) solid–liquid interface. This investigation suggests that the inclusion of a second monolayer of H2O molecules is sufficient to induce on the first adsorbed layer, a vibrational dynamics similar to that taking place in the presence of an aqueous environment. The present QM-MM scheme appears as a very interesting tool to efficiently perform molecular dynamics simulations of complex condensed matter systems, from solutions to nanoconfined fluids to different kind of interfaces.

  • Nanostructures and nanoelectronics

  • 335301

    , and

    We design spin filters for particles with potentially arbitrary spin $S\left(=1/2,1,3/2,\ldots \right)$ using a one-dimensional periodic chain of magnetic atoms as a quantum device. Describing the system within a tight-binding formalism we present an analytical method to unravel the analogy between a one-dimensional magnetic chain and a multi-strand ladder network. This analogy is crucial, and is subsequently exploited to engineer gaps in the energy spectrum by an appropriate choice of the magnetic substrate. We obtain an exact correlation between the magnitude of the spin of the incoming beam of particles and the magnetic moment of the substrate atoms in the chain desired for opening up of a spectral gap. Results of spin polarized transport, calculated within a transfer matrix formalism, are presented for particles having half-integer as well as higher spin states. We find that the chain can be made to act as a quantum device which opens a transmission window only for selected spin components over certain ranges of the Fermi energy, blocking them in the remaining part of the spectrum. The results appear to be robust even when the choice of the substrate atoms deviates substantially from the ideal situation, as verified by extending the ideas to the case of a ‘spin spiral’. Interestingly, the spin spiral geometry, apart from exhibiting the filtering effect, is also seen to act as a device flipping spins—an effect that can be monitored by an interplay of the system size and the period of the spiral. Our scheme is applicable to ultracold quantum gases, and might inspire future experiments in this direction.

  • Correlated electrons

  • 335601

    , , , and

    The notion of the electron Fermi surface is one of the characteristic concepts in the field of condensed matter physics, and it plays a crucial role in the understanding of the physical properties of doped Mott insulators. Based on the t-J model, we study the nature of the electron Fermi surface in the cobaltates, and qualitatively reproduce the essential feature of the evolution of the electron Fermi surface with doping. It is shown that the underlying hexagonal electron Fermi surface obeys Luttinger’s theorem. The theory also predicts a Fermi-arc phenomenon at the low-doped regime, where the region of the hexagonal electron Fermi surface along the $\Gamma$ -K direction is suppressed by the electron self-energy, and then six disconnected Fermi arcs located at the region of the hexagonal electron Fermi surface along the $\Gamma$ -M direction emerge. However, this Fermi-arc phenomenon at the low-doped regime weakens with the increase of doping.

  • Semiconductors

  • 335801

    , , , , and

    Positron annihilation spectroscopy was performed to study defects in Ge doped with As, P and Sb. In each case, the samples had approximately the same dopant concentration  ∼1019 cm−3. Results from the Doppler broadening and positron lifetime spectroscopies were compared to electronic structure calculations. The positron lifetime results show that the open volume related to the defect centers is not larger than a monovacancy. The results suggest that in the As doped sample the dominant trap at room temperature is a complex consisting of a vacancy and at least three dopant atoms. In the case of P doped Ge the results indicate that two defect complexes compete in positron trapping. Complexes with a higher number of P atoms around the vacancy seem to dominate at room temperature whereas at low temperature positron trapping at centers with fewer P atoms around the vacancy becomes more significant. The complexes with fewer P atoms are more negatively charged. In Sb doped Ge the results suggest that several types of traps are simultaneously competing in positron trapping at all measurement temperatures.

  • Magnetism and magnetic materials

  • 336001

    and

    Transition metal-free-ferromagnetism in diluted magnetic semiconductors (DMS) is of much current interest in view of the search for more efficient DMS materials for spintronics applications. Our DFT results predict for the first time, that impurities from group1A (Li+, Na+, K+) doped on Y2O3 can induce a magnetic signature with a magnetic moment around 2.0 μB per defect at hole concentrations around 1.63  ×  1021 cm−3, which is one order less than the critical hole density of ZnO with ferromagnetic coupling large enough to promote room temperature ferromagnetism. The induction of room temperature ferromagnetism by hole doping with an impurity atom from group 1A, which injects two holes per defect in the system, implies that the recommendation of three holes per defect given in the literature, which puts a restriction on the choice of host material and the impurity, is not a necessary criterion for hole induced room temperature ferromagnetism. DFT simulations with the generalized gradient approximation (GGA), confirmed by the more sophisticated hybrid functional, Heyd–Scuseria–Ernzerhof (HSE06), predict that the magnetic moment is mostly contributed by O atoms surrounding the impurity atom and the magnetic moment scale up with impurity concentration which is a positive indicator for practical applications. We quantitatively and extensively demonstrate through the analysis of the density of states and ferromagnetic coupling that the Stoner criterion is satisfied by pushing the Fermi level inside the valence band to activate room temperature ferromagnetism. The stability of the structure and the persistence of ferromagnetism at room temperature were demonstrated by ab initio MD simulations and computation of Curie temperature through the mean field approximation. This study widens the choice of host oxides to tailor DMS for spintronics applications.

  • 336002

    , , and

    YbPdSi with orthorhombic crystal structure (space group Pmmn) exhibits a magnetic transition at ${{T}_{\text{m}}}=8$ K, below which a ferromagnetic moment develops with an enhanced electronic specific-heat coefficient $\gamma \sim 200$ mJ K−2 mol−1. We have investigated the magnetization, electrical resistivity, and specific heat of YbPdSi using single crystalline samples as functions of temperature and magnetic field. It has been found that the ferromagnetic moment points to the c-direction, although the magnetic moments have an Ising-like anisotropy along the b-direction above the magnetic-transition temperature. Field dependence of the magnetization and electrical resistivity shows a metamagnetic-like transition at ${{H}_{\text{m}}}=0.3$ T when field is applied along the b-axis below T  =  3 K, suggesting the existence of an antiferromagnetic component along this direction. The magnetic structure has been investigated by neutron diffraction using powder samples. The magnetic unit cell is identical to the crystal unit cell. The Rietveld fitting has revealed that Yb at the 2a and 2b positions exhibit a collinear ferromagnetic order along the c-axis, whereas Yb at the 4e position undergoes a non-collinear order, involving the ferromagnetic moment along the c-axis and an antiferromagnetic component along the b-axis. The ferromagnetic moments determined by the neutron diffraction are 0.26, 1.3, and 0.15 ${{\mu}_{\text{B}}}$ for Yb at the 4e, 2b, and 2a sites, respectively. The reduced moments for the 4e and the 2a sites suggest that the Kondo screening effect is important in YbPdSi.

  • 336003

    , , , , and

    Temperature-dependent specific heat, magnetization and neutron diffraction data have been collected in zero magnetic field for polycrystalline samples of MnW1−xMoxO4 (x  ⩽  0.2) solid solution whose end-member MnWO4 exhibits a magnetoelectric multiferroic phase (AF2 phase) between T1  ≈  8 K and T2  =  12.5 K. In MnW1−xMoxO4, diamagnetic W6+ are replaced with diamagnetic Mo6+ cations and magnetic couplings among Mn2+ (3d 5, S  =  5/2) ions are modified due the doping-induced tuning of the orbital hybridization between Mn 3d and O 2p states. It was observed that magnetic phase transition temperatures which are associated with the second-order AF3-to-paramagnetic (TN) and AF2-to-AF3 (T2) transitions in pure MnWO4 slightly increase with the Mo content x. Magnetic specific heat data also indicate that the first-order AF1-to-AF2 phase transition at T1 survives a weak doping x  ⩽  0.05. This latter phase transition becomes invisible above the base temperature 2 K for higher level of doping x  ⩾  0.10. Neutron powder diffraction datasets collected above 1.5 K for a sample of MnW0.8Mo0.2O4 were analyzed using the Rietveld method. The magnetic structure below  ≈  14 K is a helical incommensurate spin order with a temperature-independent propagation vector k  =  (−0.217(6), 0.5, 0.466(4)). This cycloidal magnetic structure is similar to the polar AF2 structure observed in MnWO4. The AF1 up-up-down-down collinear spin arrangement observed in MnWO4 is absent in our MnW0.8Mo0.2O4 sample.

  • 336004

    , , , , , , , , , et al

    We present studies of structural, magnetic, and electrical properties of Zn1−xMnxSnSb2+MnSb nanocomposite ferromagnetic semiconductors with the average Mn-content, $\bar{x}$ , changing from 0.027 up to 0.138. The magnetic force microscope imaging done at room temperature shows the presence of a strong signal coming from MnSb clusters. Magnetic properties show the paramagnet-ferromagnet transition with the Curie temperature, TC, equal to about 522 K and the cluster-glass behavior with the transition temperature, TCG, equal to about 465 K, both related to MnSb clusters. The magnetotransport studies show that all investigated samples are p-type semiconductors with high hole concentration, p, changing from 1021 to 1022 cm−3. A large increase in the resistivity as a function of the magnetic field is observed at T  <  10 K and small magnetic fields, $|B|<100$ mT, for all the studied samples with a maximum amplitude of the magnetoresistance about 460% at T  =  1.4 K. The large increase in the resistivity is most probably caused by the appearance of the superconducting state in the samples at T  <  4.3 K.

  • 336005

    , , and

    The influence of Pt thickness on the interface structure (roughness / intermixing) and magnetic properties has been investigated for (Co / Pt) multilayers sputtered on a Pt or a thin oxide (MgO or AlOx) buffer layer. When Pt thickness increases from 1.2 nm–2.2 nm, we observe that the effective anisotropy increases with the Pt thickness, simultaneously with the decrease of roughness, i.e. the occurrence of sharper interfaces. Perpendicular magnetic anisotropy (PMA) is still achieved on the oxide buffer layers, but with a lower effective anisotropy correlated to more perturbed interfaces. The detailed analysis of the saturation magnetization shows that: (i) Ms is significantly enhanced in the case of rough/intermixed interfaces, which is attributed to and discussed in the framework of Pt induced polarization, (ii) the change in volume dipolar anisotropy is the main factor responsible for the reduction of Keff for systems grown on oxides. Beyond the major role of volume dipolar contribution that reduces PMA, a supplemental positive contribution promoting PMA can be invoked for rough interfaces and large Ms (deposit on oxide). This contribution is consistent with a dipolar surface anisotropy term and increases for rough interfaces, in contrast to the Néel surface anisotropy. These opposite variations may interestingly lead to an enhanced anisotropy in (Co / Pt) stackings grown on oxides compared to systems deposited on Pt, i.e. with sharper interfaces.