The following article is Free article

Corrosion Resistance of Some Nickel-Base Alloys to Molten Fluoride Salts Containing UF4 and Tellurium*

, and

© 1976 ECS - The Electrochemical Society
, , Citation J. R. Keiser et al 1976 Proc. Vol. 1976-6 315DOI 10.1149/197606.0315PV

2576-1579/1976-6/1/315

Abstract

Selection of a material for the primary containment vessel of a Molten-Salt Breeder Reactor has required the development of an alloy to resist corrosion by both the UF4 and the fission product tellurium contained in the fuel salt. Thermal convection loop corrosion studies have been performed to establish the time and concentration dependence of chromium mass transfer and to determine the corrosion rate of niobium-modified Hastelloy N. Voltammetry was used to measure the oxidation potential and corrosion product concentration of the salt. Two types of tensile specimens designed for conventional tensile testing and for testing in an Auger electron spectroscopy apparatus have been exposed to tellurium-containing salt systems to determine both the penetration rate of tellurium and the effect on cracking behavior of niobium additions to Hastelloy N. Results indicate that Hastelloy N modified by the addition of 1 wt % Nb has improved resistance to tellurium cracking while maintaining UF4 corrosion resistance when compared with the unmodified alloy.

Export citation and abstractBibTeXRIS

10.1149/197606.0315PV