The interaction between a polystyrene-Equation or symbol description not availableb-polybutadiene-Equation or symbol description not availableb-polystyrene (SBS) porogen and a low-Equation or symbol description not availablek methylsilsesquioxane (MSQ) matrix under different curing profiles and their impact on porogen size were studied by grazing incidence small-angle X-ray scattering, viscosity measurement, and Fourier transform infrared analysis. For slow curing, significant porogen diffusion and aggregation occurred between 100 and Equation or symbol description not available170°C, at which the porogen size increased from Equation or symbol description not available12to32nm. The interaction mechanism between porogen and the MSQ matrix and its correlation with porogen size during the thermal cure process were elucidated. The aggregation of the SBS porogen was greatly influenced by the microstructure of the MSQ matrix at three controlling temperatures; namely, (1) glass transition temperature, Equation or symbol description not availableTg Equation or symbol description not available(∼100°C), (2) onset temperature Equation or symbol description not available(160°C) for transforming cage to network structure, and (3) immobilization temperature Equation or symbol description not available(170°C). In contrast, a rapid curing rate enabled the formation of small porogen size Equation or symbol description not available(∼12nm) in the hybrid films and yielded better mechanical strength.