The structural, thermal, and electrical characteristics of calcium- and cobalt-doped yttrium chromites were studied for potential use as interconnect material in high temperature solid oxide fuel cells as well as other high temperature electrochemical and thermoelectric devices. The Equation or symbol description not availableY0.8Ca0.2Cr1−xCoxO3±δ Equation or symbol description not available(x=0,0.1,0.2,0.3) compositions formed single-phase orthorhombic perovskite structures in a wide range of oxygen pressures. Sintering behavior was remarkably enhanced as a result of cobalt substitution for chromium, and densities 95 and 97% of theoretical density were obtained after sintering at Equation or symbol description not available1300°C in air, when Equation or symbol description not availablex was 0.2 and 0.3, respectively. The electrical conductivity in both oxidizing and reducing atmospheres was significantly improved with cobalt additions, and was 49 and 10 S/cm at Equation or symbol description not available850°C and 55 and 14 S/cm at Equation or symbol description not available950°C in air and forming gas, respectively, for Equation or symbol description not availablex=0.2. The conductivity increase upon cobalt substitution for chromium was attributed to the charge carrier density increase as confirmed by Seebeck measurements. The thermal expansion coefficient was increased with cobalt content and closely matched to that of an 8 mol % yttria-stabilized zirconia (YSZ) electrolyte for Equation or symbol description not available0.1≤x≤0.2. For Equation or symbol description not availablex≤0.2, Equation or symbol description not availableY0.8Ca0.2Cr1−xCoxO3±δ and YSZ were found to be chemically compatible for firing temperatures to at least Equation or symbol description not available1400°C.