Abstract
Nanocrystalline diamond films deposited on SOI and electron beam patterning techniques are used to fabricate a field emission device with sub-micron cathode-anode separation. The subsequent aluminum evaporation and dry etch creates a mask for the electrode features, demonstrating that the nanodiamond (ND) roughness does not compromise the device delineation when proper EBL write parameters are used. A mixture of BCl3 and Cl2 were used to dry etch the aluminum, oxygen O2 plasma was used to etch the nanodiamond, and SF6 gas was used to etch the active layer of silicon followed by KOH:DIH2O wet etching.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.