Abstract
InP layer transfer with masked implantation was investigated to eliminate ion-implantation induced damage involved in the ion-cut process. InP donor wafers were selectively implanted with hydrogen through a mask at a dose of
at
. The layers which were subsequently mechanically exfoliated were characterized by large pyramidal protrusions on the surface, associated with the unimplanted regions. This undesirable morphology was bypassed through the inclusion of a selective etch-stop layer. The resulting structures possessed flat surfaces suitable for further bonding. This process enables the transfer of finished devices, unaffected by ion-implantation, onto a variety of desirable substrates.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
