The electrochemical pitting behavior of UNS C11000 copper was investigated in a synthetic potable water found to cause pitting. Tests were also conducted in several other Equation or symbol description not availableHCO3−, Equation or symbol description not availableSO42−, and Equation or symbol description not availableCl− containing waters with systematic variations in concentrations of these species. Studies of the effect of water chemistry on passivity, uniform corrosion, and pitting were accomplished using the cyclic voltammetry method complemented by various diagnostic methods. Certain water chemistry concentrations promote pitting. Critical pitting potentials Equation or symbol description not available(EPit) for copper pitting are decreased by certain water chemistry variables. High Equation or symbol description not available[SO42−]/Equation or symbol description not available[OH−], Equation or symbol description not available[SO42−]/Equation or symbol description not available[HCO3−], and Equation or symbol description not availableCl−/Equation or symbol description not available[HCO3−] ratios lower pitting potentials while an increase in alkalinity (increasing Equation or symbol description not available[OH−] or Equation or symbol description not available[HCO3−]/Equation or symbol description not available[CO32−]) improves passivity and raises pitting potentials. Equation or symbol description not availableHCO3−/Equation or symbol description not availableCO32− can protect copper surfaces by forming carbonate containing minerals. However, carbonated species are less beneficial toward passivity compared to Equation or symbol description not availableOH− with respect to passivation efficiency. Empirical equations that forecast pitting and repassivation potentials as a function of selected water chemistry variables were developed by linear regression analysis based on experimental pitting and repassivation potential trends with Equation or symbol description not availableHCO3−, Equation or symbol description not availableCl−, and Equation or symbol description not availableSO42− content. The origins of the trends with water chemistry variables are discussed.