Abstract
In the present paper the use of Ni infiltration into preformed porous yttria-stabilized zirconia structures is investigated as a possible solution to the redox problem of Ni-based solid oxide fuel cell (SOFC) anodes and anode supports. It is shown that cermets containing
Ni prepared by infiltration exhibited a conductivity above
at room temperature, which dropped by 20% after one redox cycle, but was not accompanied by bulk dimensional changes. The dimensional stability is attributed to the properties of the microstructure that is produced by infiltration.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
