Abstract
Ultrathin layers of oppositely charged poly(diallyldimethylammonium chloride) (PDDA) and Nafion were alternately deposited on negatively charged phenylsilsesquioxane
microparticles via layer-by-layer assembly. An extremely small amount of Nafion was used for the layers. The average thickness of a Nafion layer was estimated to be 2.6 nm from the amount of deposited Nafion and the density. A monolithic sheet was obtained from
particles with PDDA and the Nafion multilayer when the particles were pressed at 70 MPa. Fenton’s test, differential thermal analysis, and thermogravimetry revealed that
particles are chemically and thermally stable. The monolithic samples prepared using PDDA/Nafion-multilayer-coated
particles showed proton conductivities
orders of magnitude higher than those of samples without multilayers, and their conductivity reached about
at
and
relative humidity.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
