Equation or symbol description not availableLa2CuO4 (LCO) powders were used to fabricate electrodes for solid-state potentiometric Equation or symbol description not availableNOx sensors [LCO∣yttria-stabilized zirconia (YSZ)∣Pt], and symmetrical Pt (Pt∣YSZ∣Pt) and Equation or symbol description not availableLa2CuO4 (LCO∣YSZ∣LCO) cells. The impedances of the sensors and symmetrical cells were measured. Three phenomena were observed in the impedance spectra: Equation or symbol description not availableO2 ion conduction in the YSZ electrolyte, surface conduction on the Equation or symbol description not availableLa2CuO4 electrode, and the electrochemical reaction of Equation or symbol description not availableO2 at the electrode/electrolyte/gas interface. The impedance associated with Equation or symbol description not availableO2 reduction/oxidation decreased in the presence of Equation or symbol description not availableO2, NO, and Equation or symbol description not availableNO2, in contrast to the potentiometric response which increased in NO, decreased in Equation or symbol description not availableNO2, and was unaffected by changes in Equation or symbol description not availableO2 concentration. The impedance associated with surface conduction on the Equation or symbol description not availableLa2CuO4 electrode was affected by NO and Equation or symbol description not availableNO2 in much the same way as the previously reported potentiometric sensor response Equation or symbol description not available(ΔOCP) in terms of temperature and concentration dependencies providing evidence for an adsorption mechanism for the potentiometric response.