It is widely known that the presence of oxygen ambient during the deposition affects the properties of Equation or symbol description not availableMgO films. However, there have not been sufficient studies done that take these effects into consideration. Therefore, in this study, we investigated the effects of Equation or symbol description not availableO2 ambient during the electron beam evaporation on the properties of both the Equation or symbol description not availableMgO thin film as a whole and its surface. In terms of its effects on the films as a whole, the growth behavior and crystallographic orientations were considered. In terms of its effects on the surfaces of the films, the surface morphologies and surface electronic structures strongly related to the firing voltages of the panels were investigated. The column sizes of the film formed under Equation or symbol description not availableO2 ambient were larger than those of the film formed without Equation or symbol description not availableO2 ambient. The Equation or symbol description not availableMgO film formed under Equation or symbol description not availableO2 ambient at a pressure of Equation or symbol description not available2×10−4Torr had the highest (111) preferred crystallographic orientation. In addition, the surface of the film formed under Equation or symbol description not available2×10−4Torr of Equation or symbol description not availableO2 ambient had the highest density of states of the valence band and the smallest bandgap. This caused the panel with the Equation or symbol description not availableMgO film to have the lowest firing voltages.