Abstract
We report on the fabrication and characterization of pentacene based thin-film transistors (TFTs) with low-
poly-4-vinylphenol (PVP)/high-
yttrium oxide
bilayer gate dielectrics of various thickness combinations, for the thin-PVP layers (45, 70, and
) and for the thin
(50 and
). Neither
nor thin-PVP single layer film alone can properly function as a dielectric layer due to their very high leakage current. However, our bilayer films of six different thickness combinations (among which the thinnest was
while the thickest was
) all exhibited quite a good dielectric strength of
, based on our maximum leakage current standard of
. All pentacene TFTs with the
bilayer gate dielectric films successfully demonstrated good TFT characteristics at an operating voltage less than
. In particular, two of our devices studied here with the bilayer combinations (45 nm thin PVP on 50 nm and 100 nm thick
) exhibited good device performance with field effect mobilities (1.74 and
) and an on/off current ratio of
. We also demonstrate a resistance-load inverter operating below
with a load resistance
of
connected to our pentacene TFT with a PVP
layer.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
