Abstract
The total amount of anodic corrosion of Pb and Pb‐Sb alloys in sulfuric acid under conditions of O2 evolution can be evaluated by measuring the length of the potential plateau (transition time) during the electrochemical reduction of the
layers, with a constant current, taking into account self ‐discharge and degree of utilization of the
. Using high resolution techniques, a characteristic step in the potential plateau during discharge of the
layer was discovered. This step can be attributed to a difference in discharge over‐voltage between
. For alloys of the Pb‐Sb system, constant current corrosion increases slightly with increasing Sb concentration, whereas oxygen overvoltage decreases and constant potential corrosion strongly increases with increasing Sb concentration.
Precise electrode potential measurements of the
and the
couple gave
and
, respectively, vs. H2 in 4.40M sulfuric acid at 31.8°C. These two oxides have different oxygen overvoltage characteristics.
Removal of oxygen from
results in a new crystalline compound
, with a pseudo‐face‐centered cubic orthorhombic lattice. This new compound is a nonconductor. The influence of the oxygen content of the lead oxides on their electrochemical behavior is discussed.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
