Abstract
The electrode kinetics of the Fe+++/Fe++ couple on passive Fe‐Cr alloys were studied in acid solutions of constant ionic strength
. Tafel behavior is generally observed with exchange currents of the order of 10−6 amp/cm2
, a cathodic transfer coefficient of 0.40, and an anodic transfer coefficient of 0.36. The electrochemical reaction order is unity both for oxidation of Fe++ and reduction of Fe+++; the heat of activation at the reversible potential is 10.8 kcal/mole. The results show that an appreciable fraction of the total potential drop on anodic polarization occurs within the passive film. This potential drop is probably associated with changes in the average oxidation state of cations between the inner and outer layers of the surface oxide. The electrochemical characteristics of the film depend on the pH of the solution, probably because of the migration of protons into the passive film. A change in the kinetics of Fe++ oxidation which occurs in the transpassive region of the Fe‐Cr alloy is due to the production of Fe+3 or Cr+6 ions in the inner oxide layer.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
