The traveling solvent method (TSM) of crystal growth was evaluated as a means of determining the solidus in a phase diagram, by investigating a portion of the bismuth‐tellurium phase system. Sections of ingots grown by TSM were chemically analyzed and these results, combined with the crystallization temperatures of the same sections, were used to define equilibrium solidus lines. A comparison of these results with those obtained from long‐ term annealing experiments performed by another investigator essentially showed agreement between the two techniques. Much less time and effort is required to obtain the same information if TSM is used. An ingot was grown across a peritectic reaction temperature in the Bi‐Te system to demonstrate the ability to prepare a peritectic compound and a congruently melting compound in the same ingot.