The Equation or symbol description not availableInGaN-based light-emitting diode (LED) with an inclined undercut structure is fabricated through the photoelectrochemical two-step process to increase light extraction efficiency. In the first step the sidewall-undercut structure at the p-type and n-type Equation or symbol description not availableGaN interface is created by selective wet oxidation on an n-type Equation or symbol description not availableGaN surface in pure Equation or symbol description not availableH2O solution. In the second step an inclined undercut structure through a crystallographic wet-etching process is formed by immersion in hot Equation or symbol description not availableKOH solution. This crystallographic wet-etching process can remove the Equation or symbol description not availableGa2O3 layer and form a Equation or symbol description not available{1011¯} p-type Equation or symbol description not availableGaN stable plane, Equation or symbol description not available{101¯0} n-type Equation or symbol description not availableGaN stable plane on the mesa sidewall. This inclined p-type Equation or symbol description not availableGaN plane of LED structure can provide the higher overlap of incident light beam core and extraction core overlap on the mesa sidewall, and the total light output power of the treated LED is 2.10 times higher than the standard LED. Consequently, this inclined undercut LED structure is suitable for high-efficiency nitride-based LED application.