Erratum: Impedance Characterization of Anodic Barrier Al Oxide Film Beneath Porous Oxide Layer [ J. Electrochem. Soc. , 153 , B304 (2006) ]

, and

Published 6 September 2006 • © 2006 ECS - The Electrochemical Society
, , Citation Rudolf K. Potucek et al 2006 J. Electrochem. Soc. 153 L27DOI 10.1149/1.2337638

1945-7111/153/11/L27

Abstract

Abstract not Available.

Export citation and abstractBibTeXRIS

The caption to Fig. 1 on page B306 should have been as follows

Figure 1. Refer to the following caption and surrounding text.

Figure 1. (Color online) (a) EIS absolute impedance and (b) phase angle spectra of Al sample, anodized for Equation or symbol description not available5min at Equation or symbol description not available14V in pH 7 buffer solution, collected at Equation or symbol description not available100mV dc bias. EIS spectra in pH 7 borate buffer Equation or symbol description not available(◻) before and Equation or symbol description not available(■) after exposure to Equation or symbol description not available1MH2SO4, as well as Equation or symbol description not available(○) during exposure to Equation or symbol description not available1MH2SO4. The low (1), medium (2), and high (3) frequency regions are circled in (a).