Abstract
A metallic Cu layer was chemically formed on an electrodeposited
layer with high resistivity by a simple immersion in aqueous solutions containing either potassium borohydride or dimethylamineborane for several minutes. The structural and electrical characterizations were performed using a X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, four-point probe tester, and current-voltage measurements. A highly adhesive Cu layer was formed on the
under-layer by immersion in both solutions, and the thickness increased with increasing immersion time. The sheet resistance as low as
and resistivity of
were obtained for the
thick Cu layer prepared by immersion for
. The Cu layer also showed an ohmic behavior to the
layer.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
